linux-stable.git/drivers/gpu/drm, branch v4.4.185

drm/vmwgfx: NULL pointer dereference from vmw_cmd_dx_view_define()

2019-06-22T06:18:24+00:00

commit bcd6aa7b6cbfd6f985f606c6f76046d782905820 upstream.

If SVGA_3D_CMD_DX_DEFINE_RENDERTARGET_VIEW is called with a surface
ID of SVGA3D_INVALID_ID, the srf struct will remain NULL after
vmw_cmd_res_check(), leading to a null pointer dereference in
vmw_view_add().

Cc: 
Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Signed-off-by: Murray McAllister 
Reviewed-by: Thomas Hellstrom 
Signed-off-by: Thomas Hellstrom 
Signed-off-by: Greg Kroah-Hartman

drm/vmwgfx: integer underflow in vmw_cmd_dx_set_shader() leading to an invalid read

2019-06-22T06:18:24+00:00

commit 5ed7f4b5eca11c3c69e7c8b53e4321812bc1ee1e upstream.

If SVGA_3D_CMD_DX_SET_SHADER is called with a shader ID
of SVGA3D_INVALID_ID, and a shader type of
SVGA3D_SHADERTYPE_INVALID, the calculated binding.shader_slot
will be 4294967295, leading to an out-of-bounds read in vmw_binding_loc()
when the offset is calculated.

Cc: 
Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Signed-off-by: Murray McAllister 
Reviewed-by: Thomas Hellstrom 
Signed-off-by: Thomas Hellstrom 
Signed-off-by: Greg Kroah-Hartman

drm/bridge: adv7511: Fix low refresh rate selection

2019-06-22T06:18:19+00:00

[ Upstream commit 67793bd3b3948dc8c8384b6430e036a30a0ecb43 ]

The driver currently sets register 0xfb (Low Refresh Rate) based on the
value of mode->vrefresh. Firstly, this field is specified to be in Hz,
but the magic numbers used by the code are Hz * 1000. This essentially
leads to the low refresh rate always being set to 0x01, since the
vrefresh value will always be less than 24000. Fix the magic numbers to
be in Hz.
Secondly, according to the comment in drm_modes.h, the field is not
supposed to be used in a functional way anyway. Instead, use the helper
function drm_mode_vrefresh().

Fixes: 9c8af882bf12 ("drm: Add adv7511 encoder driver")
Reviewed-by: Laurent Pinchart 
Signed-off-by: Matt Redfearn 
Signed-off-by: Sean Paul 
Link: https://patchwork.freedesktop.org/patch/msgid/20190424132210.26338-1-matt.redfearn@thinci.com
Signed-off-by: Sasha Levin

drm/gma500/cdv: Check vbt config bits when detecting lvds panels

2019-06-11T10:24:13+00:00

commit 7c420636860a719049fae9403e2c87804f53bdde upstream.

Some machines have an lvds child device in vbt even though a panel is
not attached. To make detection more reliable we now also check the lvds
config bits available in the vbt.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1665766
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede 
Signed-off-by: Patrik Jakobsson 
Link: https://patchwork.freedesktop.org/patch/msgid/20190416114607.1072-1-patrik.r.jakobsson@gmail.com
Signed-off-by: Greg Kroah-Hartman

drm/nouveau/i2c: Disable i2c bus access after ->fini()

2019-06-11T10:24:09+00:00

commit 342406e4fbba9a174125fbfe6aeac3d64ef90f76 upstream.

For a while, we've had the problem of i2c bus access not grabbing
a runtime PM ref when it's being used in userspace by i2c-dev, resulting
in nouveau spamming the kernel log with errors if anything attempts to
access the i2c bus while the GPU is in runtime suspend. An example:

[  130.078386] nouveau 0000:01:00.0: i2c: aux 000d: begin idle timeout ffffffff

Since the GPU is in runtime suspend, the MMIO region that the i2c bus is
on isn't accessible. On x86, the standard behavior for accessing an
unavailable MMIO region is to just return ~0.

Except, that turned out to be a lie. While computers with a clean
concious will return ~0 in this scenario, some machines will actually
completely hang a CPU on certian bad MMIO accesses. This was witnessed
with someone's Lenovo ThinkPad P50, where sensors-detect attempting to
access the i2c bus while the GPU was suspended would result in a CPU
hang:

  CPU: 5 PID: 12438 Comm: sensors-detect Not tainted 5.0.0-0.rc4.git3.1.fc30.x86_64 #1
  Hardware name: LENOVO 20EQS64N17/20EQS64N17, BIOS N1EET74W (1.47 ) 11/21/2017
  RIP: 0010:ioread32+0x2b/0x30
  Code: 81 ff ff ff 03 00 77 20 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3
  48 c7 c6 e1 0c 36 96 e8 2d ff ff ff b8 ff ff ff ff c3 8b 07  0f 1f
  40 00 49 89 f0 48 81 fe ff ff 03 00 76 04 40 88 3e c3 48
  RSP: 0018:ffffaac3c5007b48 EFLAGS: 00000292 ORIG_RAX: ffffffffffffff13
  RAX: 0000000001111000 RBX: 0000000001111000 RCX: 0000043017a97186
  RDX: 0000000000000aaa RSI: 0000000000000005 RDI: ffffaac3c400e4e4
  RBP: ffff9e6443902c00 R08: ffffaac3c400e4e4 R09: ffffaac3c5007be7
  R10: 0000000000000004 R11: 0000000000000001 R12: ffff9e6445dd0000
  R13: 000000000000e4e4 R14: 00000000000003c4 R15: 0000000000000000
  FS:  00007f253155a740(0000) GS:ffff9e644f600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00005630d1500358 CR3: 0000000417c44006 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   g94_i2c_aux_xfer+0x326/0x850 [nouveau]
   nvkm_i2c_aux_i2c_xfer+0x9e/0x140 [nouveau]
   __i2c_transfer+0x14b/0x620
   i2c_smbus_xfer_emulated+0x159/0x680
   ? _raw_spin_unlock_irqrestore+0x1/0x60
   ? rt_mutex_slowlock.constprop.0+0x13d/0x1e0
   ? __lock_is_held+0x59/0xa0
   __i2c_smbus_xfer+0x138/0x5a0
   i2c_smbus_xfer+0x4f/0x80
   i2cdev_ioctl_smbus+0x162/0x2d0 [i2c_dev]
   i2cdev_ioctl+0x1db/0x2c0 [i2c_dev]
   do_vfs_ioctl+0x408/0x750
   ksys_ioctl+0x5e/0x90
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x60/0x1e0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7f25317f546b
  Code: 0f 1e fa 48 8b 05 1d da 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
  ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
  f0 ff ff 73 01 c3 48 8b 0d ed d9 0c 00 f7 d8 64 89 01 48
  RSP: 002b:00007ffc88caab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 00005630d0fe7260 RCX: 00007f25317f546b
  RDX: 00005630d1598e80 RSI: 0000000000000720 RDI: 0000000000000003
  RBP: 00005630d155b968 R08: 0000000000000001 R09: 00005630d15a1da0
  R10: 0000000000000070 R11: 0000000000000246 R12: 00005630d1598e80
  R13: 00005630d12f3d28 R14: 0000000000000720 R15: 00005630d12f3ce0
  watchdog: BUG: soft lockup - CPU#5 stuck for 23s! [sensors-detect:12438]

Yikes! While I wanted to try to make it so that accessing an i2c bus on
nouveau would wake up the GPU as needed, airlied pointed out that pretty
much any usecase for userspace accessing an i2c bus on a GPU (mainly for
the DDC brightness control that some displays have) is going to only be
useful while there's at least one display enabled on the GPU anyway, and
the GPU never sleeps while there's displays running.

Since teaching the i2c bus to wake up the GPU on userspace accesses is a
good deal more difficult than it might seem, mostly due to the fact that
we have to use the i2c bus during runtime resume of the GPU, we instead
opt for the easiest solution: don't let userspace access i2c busses on
the GPU at all while it's in runtime suspend.

Changes since v1:
* Also disable i2c busses that run over DP AUX

Signed-off-by: Lyude Paul 
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs 
Signed-off-by: Greg Kroah-Hartman

drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers

2019-04-27T07:33:53+00:00

[ Upstream commit c978ae9bde582e82a04c63a4071701691dd8b35c ]

We aren't supposed to force a stop+start between every i2c msg
when performing multi message transfers. This should eg. cause
the DDC segment address to be reset back to 0 between writing
the segment address and reading the actual EDID extension block.

To quote the E-DDC spec:
"... this standard requires that the segment pointer be
 reset to 00h when a NO ACK or a STOP condition is received."

Since we're going to touch this might as well consult the
I2C_M_STOP flag to determine whether we want to force the stop
or not.

Cc: Brian Vincent 
References: https://bugs.freedesktop.org/show_bug.cgi?id=108081
Signed-off-by: Ville Syrjälä 
Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan 
Signed-off-by: Sasha Levin

drm/vmwgfx: Don't double-free the mode stored in par->set_mode

2019-04-03T04:23:14+00:00

commit c2d311553855395764e2e5bf401d987ba65c2056 upstream.

When calling vmw_fb_set_par(), the mode stored in par->set_mode gets free'd
twice. The first free is in vmw_fb_kms_detach(), the second is near the
end of vmw_fb_set_par() under the name of 'old_mode'. The mode-setting code
only works correctly if the mode doesn't actually change. Removing
'old_mode' in favor of using par->set_mode directly fixes the problem.

Cc: 
Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2")
Signed-off-by: Thomas Zimmermann 
Reviewed-by: Deepak Rawat 
Signed-off-by: Thomas Hellstrom 
Signed-off-by: Greg Kroah-Hartman

drm/radeon/evergreen_cs: fix missing break in switch statement

2019-03-23T07:44:40+00:00

commit cc5034a5d293dd620484d1d836aa16c6764a1c8c upstream.

Add missing break statement in order to prevent the code from falling
through to case CB_TARGET_MASK.

This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.

Fixes: dd220a00e8bd ("drm/radeon/kms: add support for streamout v7")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

drm/msm: Unblock writer if reader closes file

2019-03-23T07:44:18+00:00

[ Upstream commit 99c66bc051e7407fe0bf0607b142ec0be1a1d1dd ]

Prevents deadlock when fifo is full and reader closes file.

Signed-off-by: Kristian H. Kristensen 
Signed-off-by: Rob Clark 
Signed-off-by: Sasha Levin

drm/vmwgfx: Return error code from vmw_execbuf_copy_fence_user

2019-02-20T09:13:19+00:00

commit 728354c005c36eaf44b6e5552372b67e60d17f56 upstream.

The function was unconditionally returning 0, and a caller would have to
rely on the returned fence pointer being NULL to detect errors. However,
the function vmw_execbuf_copy_fence_user() would expect a non-zero error
code in that case and would BUG otherwise.

So make sure we return a proper non-zero error code if the fence pointer
returned is NULL.

Cc: 
Fixes: ae2a104058e2: ("vmwgfx: Implement fence objects")
Signed-off-by: Thomas Hellstrom 
Reviewed-by: Deepak Rawat 
Signed-off-by: Greg Kroah-Hartman