linux-stable.git/drivers/gpu/drm, branch v3.16.57

drm/radeon: Don't turn off DP sink when disconnected

2018-06-16T21:22:41+00:00

commit 2681bc79eeb640562c932007bfebbbdc55bf6a7d upstream.

Turning off the sink in this case causes various issues, because
userspace expects it to stay on until it turns it off explicitly.

Instead, turn the sink off and back on when a display is connected
again. This dance seems necessary for link training to work correctly.

Bugzilla: https://bugs.freedesktop.org/105308
Reviewed-by: Alex Deucher 
Signed-off-by: Michel Dänzer 
Signed-off-by: Alex Deucher 
Signed-off-by: Ben Hutchings

drm/radeon: fix prime teardown order

2018-06-16T21:22:40+00:00

commit 0f4f715bc6bed3bf14c5cd7d5fe88d443e756b14 upstream.

We unmapped imported DMA-bufs when the GEM handle was dropped, not when the
hardware was done with the buffere.

Signed-off-by: Christian König 
Reviewed-by: Michel Dänzer 
Signed-off-by: Alex Deucher 
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings

drm/radeon: fix KV harvesting

2018-06-16T21:22:34+00:00

commit 0b58d90f89545e021d188c289fa142e5ff9e708b upstream.

Always set the graphics values to the max for the
asic type.  E.g., some 1 RB chips are actually 1 RB chips,
others are actually harvested 2 RB chips.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99353
Reviewed-by: Christian König 
Signed-off-by: Alex Deucher 
Signed-off-by: Ben Hutchings

drm/radeon: insist on 32-bit DMA for Cedar on PPC64/PPC64LE

2018-06-16T21:22:23+00:00

commit 2c83029cda55a5e7665c7c6326909427d6a01350 upstream.

In radeon_device_init, set the need_dma32 flag for Cedar chips
(e.g. FirePro 2270).  This fixes, or at least works around, a bug
on PowerPC exposed by last year's commits

8e3f1b1d8255105f31556aacf8aeb6071b00d469 (Russell Currey)

and

253fd51e2f533552ae35a0c661705da6c4842c1b (Alistair Popple)

which enabled the 64-bit DMA iommu bypass.

This caused the device to freeze, in some cases unrecoverably, and is
the subject of several bug reports internal to Red Hat.

Signed-off-by: Ben Crocker 
Signed-off-by: Alex Deucher 
Signed-off-by: Ben Hutchings

drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA

2018-06-16T21:22:20+00:00

commit 06998a756a3865817b87a129a7e5d5bb66dc1ec3 upstream.

Similar to commit e10aec652f31 ("drm/edid: Add 6 bpc quirk for display
AEO model 0."), the EDID reports "DFP 1.x compliant TMDS" but it support
6bpc instead of 8 bpc.

Hence, use 6 bpc quirk for this panel.

Fixes: 196f954e2509 ("drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"")
BugLink: https://bugs.launchpad.net/bugs/1749420
Signed-off-by: Kai-Heng Feng 
Reviewed-by: Mario Kleiner 
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/20180218085359.7817-1-kai.heng.feng@canonical.com
Signed-off-by: Ben Hutchings

drm/radeon: Fix deadlock on runtime suspend

2018-06-16T21:22:19+00:00

commit 15734feff2bdac24aa3266c437cffa42851990e3 upstream.

radeon's ->runtime_suspend hook calls drm_kms_helper_poll_disable(),
which waits for the output poll worker to finish if it's running.

The output poll worker meanwhile calls pm_runtime_get_sync() in
radeon's ->detect hooks, which waits for the ongoing suspend to finish,
causing a deadlock.

Fix by not acquiring a runtime PM ref if the ->detect hooks are called
in the output poll worker's context.  This is safe because the poll
worker is only enabled while runtime active and we know that
->runtime_suspend waits for it to finish.

Stack trace for posterity:

  INFO: task kworker/0:3:31847 blocked for more than 120 seconds
  Workqueue: events output_poll_execute [drm_kms_helper]
  Call Trace:
   schedule+0x3c/0x90
   rpm_resume+0x1e2/0x690
   __pm_runtime_resume+0x3f/0x60
   radeon_lvds_detect+0x39/0xf0 [radeon]
   output_poll_execute+0xda/0x1e0 [drm_kms_helper]
   process_one_work+0x14b/0x440
   worker_thread+0x48/0x4a0

  INFO: task kworker/2:0:10493 blocked for more than 120 seconds.
  Workqueue: pm pm_runtime_work
  Call Trace:
   schedule+0x3c/0x90
   schedule_timeout+0x1b3/0x240
   wait_for_common+0xc2/0x180
   wait_for_completion+0x1d/0x20
   flush_work+0xfc/0x1a0
   __cancel_work_timer+0xa5/0x1d0
   cancel_delayed_work_sync+0x13/0x20
   drm_kms_helper_poll_disable+0x1f/0x30 [drm_kms_helper]
   radeon_pmops_runtime_suspend+0x3d/0xa0 [radeon]
   pci_pm_runtime_suspend+0x61/0x1a0
   vga_switcheroo_runtime_suspend+0x21/0x70
   __rpm_callback+0x32/0x70
   rpm_callback+0x24/0x80
   rpm_suspend+0x12b/0x640
   pm_runtime_work+0x6f/0xb0
   process_one_work+0x14b/0x440
   worker_thread+0x48/0x4a0

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94147
Fixes: 10ebc0bc0934 ("drm/radeon: add runtime PM support (v2)")
Cc: Ismo Toijala 
Cc: Alex Deucher 
Cc: Dave Airlie 
Reviewed-by: Lyude Paul 
Signed-off-by: Lukas Wunner 
Link: https://patchwork.freedesktop.org/patch/msgid/64ea02c44f91dda19bc563902b97bbc699040392.1518338789.git.lukas@wunner.de
Signed-off-by: Ben Hutchings

drm/nouveau: Fix deadlock on runtime suspend

2018-06-16T21:22:19+00:00

commit d61a5c1063515e855bedb1b81e20e50b0ac3541e upstream.

nouveau's ->runtime_suspend hook calls drm_kms_helper_poll_disable(),
which waits for the output poll worker to finish if it's running.

The output poll worker meanwhile calls pm_runtime_get_sync() in
nouveau_connector_detect() which waits for the ongoing suspend to finish,
causing a deadlock.

Fix by not acquiring a runtime PM ref if nouveau_connector_detect() is
called in the output poll worker's context.  This is safe because
the poll worker is only enabled while runtime active and we know that
->runtime_suspend waits for it to finish.

Other contexts calling nouveau_connector_detect() do require a runtime
PM ref, these comprise:

  status_store() drm sysfs interface
  ->fill_modes drm callback
  drm_fb_helper_probe_connector_modes()
  drm_mode_getconnector()
  nouveau_connector_hotplug()
  nouveau_display_hpd_work()
  nv17_tv_set_property()

Stack trace for posterity:

  INFO: task kworker/0:1:58 blocked for more than 120 seconds.
  Workqueue: events output_poll_execute [drm_kms_helper]
  Call Trace:
   schedule+0x28/0x80
   rpm_resume+0x107/0x6e0
   __pm_runtime_resume+0x47/0x70
   nouveau_connector_detect+0x7e/0x4a0 [nouveau]
   nouveau_connector_detect_lvds+0x132/0x180 [nouveau]
   drm_helper_probe_detect_ctx+0x85/0xd0 [drm_kms_helper]
   output_poll_execute+0x11e/0x1c0 [drm_kms_helper]
   process_one_work+0x184/0x380
   worker_thread+0x2e/0x390

  INFO: task kworker/0:2:252 blocked for more than 120 seconds.
  Workqueue: pm pm_runtime_work
  Call Trace:
   schedule+0x28/0x80
   schedule_timeout+0x1e3/0x370
   wait_for_completion+0x123/0x190
   flush_work+0x142/0x1c0
   nouveau_pmops_runtime_suspend+0x7e/0xd0 [nouveau]
   pci_pm_runtime_suspend+0x5c/0x180
   vga_switcheroo_runtime_suspend+0x1e/0xa0
   __rpm_callback+0xc1/0x200
   rpm_callback+0x1f/0x70
   rpm_suspend+0x13c/0x640
   pm_runtime_work+0x6e/0x90
   process_one_work+0x184/0x380
   worker_thread+0x2e/0x390

Bugzilla: https://bugs.archlinux.org/task/53497
Bugzilla: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=870523
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388#c33
Fixes: 5addcf0a5f0f ("nouveau: add runtime PM support (v0.9)")
Cc: Ben Skeggs 
Cc: Dave Airlie 
Reviewed-by: Lyude Paul 
Signed-off-by: Lukas Wunner 
Link: https://patchwork.freedesktop.org/patch/msgid/b7d2cbb609a80f59ccabfdf479b9d5907c603ea1.1518338789.git.lukas@wunner.de
Signed-off-by: Ben Hutchings

drm: Allow determining if current task is output poll worker

2018-06-16T21:22:18+00:00

commit 25c058ccaf2ebbc3e250ec1e199e161f91fe27d4 upstream.

Introduce a helper to determine if the current task is an output poll
worker.

This allows us to fix a long-standing deadlock in several DRM drivers
wherein the ->runtime_suspend callback waits for the output poll worker
to finish and the worker in turn calls a ->detect callback which waits
for runtime suspend to finish.  The ->detect callback is invoked from
multiple call sites and waiting for runtime suspend to finish is the
correct thing to do except if it's executing in the context of the
worker.

v2: Expand kerneldoc to specifically mention deadlock between
    output poll worker and autosuspend worker as use case. (Lyude)

Cc: Dave Airlie 
Cc: Ben Skeggs 
Cc: Alex Deucher 
Reviewed-by: Lyude Paul 
Signed-off-by: Lukas Wunner 
Link: https://patchwork.freedesktop.org/patch/msgid/3549ce32e7f1467102e70d3e9cbf70c46bfe108e.1518593424.git.lukas@wunner.de
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings

drm/radeon: adjust tested variable

2018-06-16T21:22:03+00:00

commit 3a61b527b4e1f285d21b6e9e623dc45cf8bb391f upstream.

Check the variable that was most recently initialized.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// 
@@
expression x, y, f, g, e, m;
statement S1,S2,S3,S4;
@@

x = f(...);
if (\(<+...x...+>\&e\)) S1 else S2
(
x = g(...);
|
m = g(...,&x,...);
|
y = g(...);
*if (e)
 S3 else S4
)
// 

Signed-off-by: Julia Lawall 
Reviewed-by: Christian König 
Signed-off-by: Alex Deucher 
Signed-off-by: Ben Hutchings

drm/ttm: Don't add swapped BOs to swap-LRU list

2018-06-16T21:21:55+00:00

commit fd5002d6a3c602664b07668a24df4ef7a43bf078 upstream.

A BO that's already swapped would be added back to the swap-LRU list
for example if its validation failed under high memory pressure. This
could later lead to swapping it out again and leaking previous swap
storage.

This commit adds a condition to prevent that from happening.

v2: Check page_flags instead of swap_storage

Signed-off-by: Felix Kuehling 
Reviewed-by: Christian König 
Signed-off-by: Alex Deucher 
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings