linux-stable.git/drivers/gpu/drm, branch linux-5.0.y

drm/sun4i: dsi: Enforce boundaries on the start delay

2019-05-31T13:45:24+00:00

[ Upstream commit efa31801203ac2f5c6a82a28cb991c7163ee0f1d ]

The Allwinner BSP makes sure that we don't end up with a null start delay
or with a delay larger than vtotal.

The former condition is likely to happen now with the reworked start delay,
so make sure we enforce the same boundaries.

Signed-off-by: Maxime Ripard 
Reviewed-by: Paul Kocialkowski 
Link: https://patchwork.freedesktop.org/patch/msgid/c9889cf5f7a3d101ef380905900b45a182596f56.1549896081.git-series.maxime.ripard@bootlin.com
Signed-off-by: Sasha Levin

drm/sun4i: dsi: Change the start delay calculation

2019-05-31T13:45:23+00:00

[ Upstream commit da676c6aa6413d59ab0a80c97bbc273025e640b2 ]

The current calculation for the video start delay in the current DSI driver
is that it is the total vertical size, minus the front porch and sync length,
plus 1. This equals to the active vertical size plus the back porch plus 1.

That 1 is coming in the Allwinner BSP from an variable that is set to 1.
However, if we look at the Allwinner BSP more closely, and especially in
the "legacy" code for the display (in drivers/video/sunxi/legacy/), we can
see that this variable is actually computed from the porches and the sync
minus 10, clamped between 8 and 100.

This fixes the start delay symptom we've seen on some panels (vblank
timeouts with vertical white stripes at the bottom of the panel).

Reviewed-by: Paul Kocialkowski 
Signed-off-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/6e5f72e68f47ca0223877464bf12f0c3f3978de8.1549896081.git-series.maxime.ripard@bootlin.com
Signed-off-by: Sasha Levin

drm: Wake up next in drm_read() chain if we are forced to putback the event

2019-05-31T13:45:23+00:00

[ Upstream commit 60b801999c48b6c1dd04e653a38e2e613664264e ]

After an event is sent, we try to copy it into the user buffer of the
first waiter in drm_read() and if the user buffer doesn't have enough
room we put it back onto the list. However, we didn't wake up any
subsequent waiter, so that event may sit on the list until either a new
vblank event is sent or a new waiter appears. Rare, but in the worst
case may lead to a stuck process.

Testcase: igt/drm_read/short-buffer-wakeup
Signed-off-by: Chris Wilson 
Cc: Daniel Vetter 
Reviewed-by: Ville Syrjälä 
Link: https://patchwork.freedesktop.org/patch/msgid/20170804082328.17173-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin

drm/drv: Hold ref on parent device during drm_device lifetime

2019-05-31T13:45:23+00:00

[ Upstream commit 56be6503aab2bc3a30beae408071b9be5e1bae51 ]

This makes it safe to access drm_device->dev after the parent device has
been removed/unplugged.

Signed-off-by: Noralf Trønnes 
Reviewed-by: Gerd Hoffmann 
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-2-noralf@tronnes.org
Signed-off-by: Sasha Levin

drm/v3d: Handle errors from IRQ setup.

2019-05-31T13:45:23+00:00

[ Upstream commit fc22771547e7e8a63679f0218e943d72b107de65 ]

Noted in review by Dave Emett for V3D 4.2 support.

Signed-off-by: Eric Anholt 
Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-1-eric@anholt.net
Reviewed-by: Dave Emett 
Signed-off-by: Sasha Levin

drm/omap: Notify all devices in the pipeline of output disconnection

2019-05-31T13:45:21+00:00

[ Upstream commit 27a7e3e18419869cdcc414a404f3fe66f1b4e644 ]

For HDMI pipelines, when the output gets disconnected the device
handling CEC needs to be notified. Instead of guessing which device that
would be (and sometimes getting it wrong), notify all devices in the
pipeline.

Signed-off-by: Laurent Pinchart 
Reviewed-by: Sebastian Reichel 
Tested-by: Sebastian Reichel 
Signed-off-by: Tomi Valkeinen 
Signed-off-by: Sasha Levin

drm/omap: dsi: Fix PM for display blank with paired dss_pll calls

2019-05-31T13:45:20+00:00

[ Upstream commit fe4ed1b457943113ee1138c939fbdeede4af6cf3 ]

Currently dsi_display_init_dsi() calls dss_pll_enable() but it is not
paired with dss_pll_disable() in dsi_display_uninit_dsi(). This leaves
the DSS clocks enabled when the display is blanked wasting about extra
5mW of power while idle.

The clock that is left on by not calling dss_pll_disable() is
DSS_CLKCTRL bit 10 OPTFCLKEN_SYS_CLK that is the source clock for
DSI PLL.

We can fix this issue by by making the current dsi_pll_uninit() into
dsi_pll_disable(). This way we can just call dss_pll_disable() from
dsi_display_uninit_dsi() and the code becomes a bit easier to follow.

However, we need to also consider that DSI PLL can be muxed for DVI too
as pointed out by Tomi Valkeinen . In the DVI
case, we want to unconditionally disable the clocks. To get around this
issue, we separate out the DSI lane handling from dsi_pll_enable() and
dsi_pll_disable() as suggested by Tomi in an earlier experimental patch.

So we must only toggle the DSI regulator based on the vdds_dsi_enabled
flag from dsi_display_init_dsi() and dsi_display_uninit_dsi().

We need to make these two changes together to avoid breaking things
for DVI when fixing the DSI clock handling. And this all causes a
slight renumbering of the error path for dsi_display_init_dsi().

Suggested-by: Tomi Valkeinen 
Signed-off-by: Tony Lindgren 
Signed-off-by: Tomi Valkeinen 
Signed-off-by: Sasha Levin

drm: writeback: Fix leak of writeback job

2019-05-31T13:45:20+00:00

[ Upstream commit e482ae9b5fdc01a343f22f52930e85a6cfdf85eb ]

Writeback jobs are allocated when the WRITEBACK_FB_ID is set, and
deleted when the jobs complete. This results in both a memory leak of
the job and a leak of the framebuffer if the atomic commit returns
before the job is queued for processing, for instance if the atomic
check fails or if the commit runs in test-only mode.

Fix this by implementing the drm_writeback_cleanup_job() function and
calling it from __drm_atomic_helper_connector_destroy_state(). As
writeback jobs are removed from the state when they're queued for
processing, any job left in the state when the state gets destroyed
needs to be cleaned up.

The existing declaration of the drm_writeback_cleanup_job() function
without an implementation hints that this problem was considered, but
never addressed.

Signed-off-by: Laurent Pinchart 
Reviewed-by: Brian Starkey 
Acked-by: Liviu Dudau 
Signed-off-by: Sasha Levin

drm/amd/display: Set stream->mode_changed when connectors change

2019-05-31T13:45:19+00:00

[ Upstream commit b9952f93cd2cf5fca82b06a8179c0f5f7b769e83 ]

[Why]
The kms_plane@plane-position-covered-pipe-*-planes subtests can produce
a sequence of atomic commits such that neither active_changed nor
mode_changed but connectors_changed.

When this happens we remove the old stream from the context and add
a new stream but the new stream doesn't have mode_changed=true set.

This incorrect programming sequence causes CRC mismatches to occur in
the test.

The stream->mode_changed value should be set whenever a new stream
is created.

[How]
A new stream is created whenever drm_atomic_crtc_needs_modeset is true.
We previously covered the active_changed and mode_changed conditions
for the CRTC but connectors_changed is also checked within
drm_atomic_crtc_needs_modeset.

So just use drm_atomic_crtc_needs_modeset directly to determine the
mode_changed flag.

Signed-off-by: Nicholas Kazlauskas 
Reviewed-by: Sun peng Li 
Acked-by: Bhawanpreet Lakha 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/amd/display: Fix Divide by 0 in memory calculations

2019-05-31T13:45:19+00:00

[ Upstream commit 59979bf8be1784ebfc44215031c6c88ca22ae65d ]

Check if we get any values equal to 0, and set to 1 if so.

Signed-off-by: Murton Liu 
Reviewed-by: Aric Cyr 
Acked-by: Bhawanpreet Lakha 
Acked-by: Sivapiriyan Kumarasamy 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin