linux-stable.git/drivers/gpu/drm/virtio, branch linux-5.17.y

drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes

2022-06-09T08:25:18+00:00

[ Upstream commit 194d250cdc4a40ccbd179afd522a9e9846957402 ]

drm_cvt_mode may return NULL and we should check it.

This bug is found by syzkaller:

FAULT_INJECTION stacktrace:
[  168.567394] FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
[  168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[  168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[  168.567408] Call trace:
[  168.567414]  dump_backtrace+0x0/0x310
[  168.567418]  show_stack+0x28/0x38
[  168.567423]  dump_stack+0xec/0x15c
[  168.567427]  should_fail+0x3ac/0x3d0
[  168.567437]  __should_failslab+0xb8/0x120
[  168.567441]  should_failslab+0x28/0xc0
[  168.567445]  kmem_cache_alloc_trace+0x50/0x640
[  168.567454]  drm_mode_create+0x40/0x90
[  168.567458]  drm_cvt_mode+0x48/0xc78
[  168.567477]  virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu]
[  168.567485]  drm_helper_probe_single_connector_modes+0x3a4/0xd80
[  168.567492]  drm_mode_getconnector+0x2e0/0xa70
[  168.567496]  drm_ioctl_kernel+0x11c/0x1d8
[  168.567514]  drm_ioctl+0x558/0x6d0
[  168.567522]  do_vfs_ioctl+0x160/0xf30
[  168.567525]  ksys_ioctl+0x98/0xd8
[  168.567530]  __arm64_sys_ioctl+0x50/0xc8
[  168.567536]  el0_svc_common+0xc8/0x320
[  168.567540]  el0_svc_handler+0xf8/0x160
[  168.567544]  el0_svc+0x10/0x218

KASAN stacktrace:
[  168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[  168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425
[  168.567566]
[  168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[  168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[  168.567575] Call trace:
[  168.567578]  dump_backtrace+0x0/0x310
[  168.567582]  show_stack+0x28/0x38
[  168.567586]  dump_stack+0xec/0x15c
[  168.567591]  kasan_report+0x244/0x2f0
[  168.567594]  __asan_load4+0x58/0xb0
[  168.567607]  virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[  168.567612]  drm_helper_probe_single_connector_modes+0x3a4/0xd80
[  168.567617]  drm_mode_getconnector+0x2e0/0xa70
[  168.567621]  drm_ioctl_kernel+0x11c/0x1d8
[  168.567624]  drm_ioctl+0x558/0x6d0
[  168.567628]  do_vfs_ioctl+0x160/0xf30
[  168.567632]  ksys_ioctl+0x98/0xd8
[  168.567636]  __arm64_sys_ioctl+0x50/0xc8
[  168.567641]  el0_svc_common+0xc8/0x320
[  168.567645]  el0_svc_handler+0xf8/0x160
[  168.567649]  el0_svc+0x10/0x218

Signed-off-by: Liu Zixian 
Link: http://patchwork.freedesktop.org/patch/msgid/20220322091730.1653-1-liuzixian4@huawei.com
Signed-off-by: Gerd Hoffmann 
Signed-off-by: Sasha Levin

drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free()

2022-03-28T08:03:21+00:00

commit 6b79f96f4a23846516e5e6e4dd37fc06f43a60dd upstream.

If virtio_gpu_object_shmem_init() fails (e.g. due to fault injection, as it
happened in the bug report by syzbot), virtio_gpu_array_put_free() could be
called with objs equal to NULL.

Ensure that objs is not NULL in virtio_gpu_array_put_free(), or otherwise
return from the function.

Cc: stable@vger.kernel.org # 5.13.x
Signed-off-by: Roberto Sassu 
Reported-by: syzbot+e9072e90624a31dfa85f@syzkaller.appspotmail.com
Fixes: 377f8331d0565 ("drm/virtio: fix possible leak/unlock virtio_gpu_object_array")
Link: http://patchwork.freedesktop.org/patch/msgid/20211213183122.838119-1-roberto.sassu@huawei.com
Signed-off-by: Gerd Hoffmann 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2022-01-18T08:05:48+00:00

Pull virtio updates from Michael Tsirkin:
 "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.

   - partial support for < MAX_ORDER - 1 granularity for virtio-mem

   - driver_override for vdpa

   - sysfs ABI documentation for vdpa

   - multiqueue config support for mlx5 vdpa

   - and misc fixes, cleanups"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
  vdpa/mlx5: Fix tracking of current number of VQs
  vdpa/mlx5: Fix is_index_valid() to refer to features
  vdpa: Protect vdpa reset with cf_mutex
  vdpa: Avoid taking cf_mutex lock on get status
  vdpa/vdpa_sim_net: Report max device capabilities
  vdpa: Use BIT_ULL for bit operations
  vdpa/vdpa_sim: Configure max supported virtqueues
  vdpa/mlx5: Report max device capabilities
  vdpa: Support reporting max device capabilities
  vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
  vdpa: Add support for returning device configuration information
  vdpa/mlx5: Support configuring max data virtqueue
  vdpa/mlx5: Fix config_attr_mask assignment
  vdpa: Allow to configure max data virtqueues
  vdpa: Read device configuration only if FEATURES_OK
  vdpa: Sync calls set/get config/status with cf_mutex
  vdpa/mlx5: Distribute RX virtqueues in RQT object
  vdpa: Provide interface to read driver features
  vdpa: clean up get_config_size ret value handling
  virtio_ring: mark ring unused on error
  ...

virtio: wrap config->reset calls

2022-01-14T23:50:52+00:00

This will enable cleanups down the road.
The idea is to disable cbs, then add "flush_queued_cbs" callback
as a parameter, this way drivers can flush any work
queued after callbacks have been disabled.

Signed-off-by: Michael S. Tsirkin 
Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com
Signed-off-by: Michael S. Tsirkin

Merge v5.16-rc5 into drm-next

2021-12-14T09:24:28+00:00

Thomas Zimmermann requested a fixes backmerge, specifically also for
96c5f82ef0a1 ("drm/vc4: fix error code in vc4_create_object()")

Just a bunch of adjacent changes conflicts, even the big pile of them
in vc4.

Signed-off-by: Daniel Vetter

drm: Return error codes from struct drm_driver.gem_create_object

2021-12-02T10:12:39+00:00

GEM helper libraries use struct drm_driver.gem_create_object to let
drivers override GEM object allocation. On failure, the call returns
NULL.

Change the semantics to make the calls return a pointer-encoded error.
This aligns the callback with its callers. Fixes the ingenic driver,
which already returns an error pointer.

Also update the callers to handle the involved types more strictly.

Signed-off-by: Thomas Zimmermann 
Reviewed-by: Steven Price 
Acked-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20211130095255.26710-1-tzimmermann@suse.de

drm/virtio: use drm_poll(..) instead of virtio_gpu_poll(..)

2021-11-29T10:46:32+00:00

With the use of dummy events, we can drop virtgpu specific
behavior.

Fixes: cd7f5ca33585 ("drm/virtio: implement context init: add virtio_gpu_fence_event")
Reported-by: Daniel Vetter 
Signed-off-by: Gurchetan Singh 
Reviewed-by: Daniel Vetter 
Link: http://patchwork.freedesktop.org/patch/msgid/20211122232210.602-3-gurchetansingh@google.com
Signed-off-by: Gerd Hoffmann

drm/virtgpu api: define a dummy fence signaled event

2021-11-29T10:46:32+00:00

The current virtgpu implementation of poll(..) drops events
when VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK is enabled (otherwise
it's like a normal DRM driver).

This is because paravirtualized userspaces receives responses in a
buffer of type BLOB_MEM_GUEST, not by read(..).

To be in line with other DRM drivers and avoid specialized behavior,
it is possible to define a dummy event for virtgpu.  Paravirtualized
userspace will now have to call read(..) on the DRM fd to receive the
dummy event.

Fixes: b10790434cf2 ("drm/virtgpu api: create context init feature")
Reported-by: Daniel Vetter 
Signed-off-by: Gurchetan Singh 
Reviewed-by: Daniel Vetter 
Link: http://patchwork.freedesktop.org/patch/msgid/20211122232210.602-2-gurchetansingh@google.com
Signed-off-by: Gerd Hoffmann

drm: Move nomodeset kernel parameter to the DRM subsystem

2021-11-27T12:52:22+00:00

The "nomodeset" kernel cmdline parameter is handled by the vgacon driver
but the exported vgacon_text_force() symbol is only used by DRM drivers.

It makes much more sense for the parameter logic to be in the subsystem
of the drivers that are making use of it.

Let's move the vgacon_text_force() function and related logic to the DRM
subsystem. While doing that, rename it to drm_firmware_drivers_only() and
make it return true if "nomodeset" was used and false otherwise. This is
a better description of the condition that the drivers are testing for.

Suggested-by: Daniel Vetter 
Signed-off-by: Javier Martinez Canillas 
Acked-by: Thomas Zimmermann 
Acked-by: Jani Nikula 
Acked-by: Pekka Paalanen 
Acked-by: Greg Kroah-Hartman 
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-4-javierm@redhat.com

Merge drm/drm-next into drm-misc-next

2021-11-18T08:36:39+00:00

Backmerging from drm/drm-next for v5.16-rc1.

Signed-off-by: Thomas Zimmermann