linux-stable.git/drivers/gpu/drm/tilcdc, branch v5.18.2 Linux kernel stable tree drm/tilcdc: Add support for the nomodeset kernel parameter 2022-01-27T18:15:50+00:00 Javier Martinez Canillas javierm@redhat.com 2021-12-17T00:37:51+00:00 9b71ce89b55565ecce1b189e216048cd1348e36a According to disable Documentation/admin-guide/kernel-parameters.txt, this parameter can be used to disable kernel modesetting. DRM drivers will not perform display-mode changes or accelerated rendering and only the system framebuffer will be available if it was set-up. But only a few DRM drivers currently check for nomodeset, make this driver to also support the command line parameter. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Jyri Sarha <jyri.sarha@iki.fi> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-37-javierm@redhat.com 
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.

DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.

But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Jyri Sarha <jyri.sarha@iki.fi>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-37-javierm@redhat.com
drm/tilcdc: add const to of_device_id 2021-12-16T14:51:47+00:00 Xiang wangx wangxiang@cdjrlc.com 2021-12-16T09:55:36+00:00 fef6d35d82c22d7451bdaccc346f993c6d922cd9 struct of_device_id should normally be const. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/20211216095536.58577-1-wangxiang@cdjrlc.com 
struct of_device_id should normally be const.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216095536.58577-1-wangxiang@cdjrlc.com
drm: Remove CONFIG_DRM_KMS_CMA_HELPER option 2021-11-30T10:10:03+00:00 Thomas Zimmermann tzimmermann@suse.de 2021-11-06T19:35:09+00:00 09717af7d13d63df141ae6e71686289989d17efd Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting KMS helpers and CMA will now automatically enable CMA KMS helpers. Some drivers' Kconfig files did not correctly select KMS or CMA helpers. Fix this as part of the change. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211106193509.17472-3-tzimmermann@suse.de 
Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER
has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting
KMS helpers and CMA will now automatically enable CMA KMS helpers.

Some drivers' Kconfig files did not correctly select KMS or CMA helpers.
Fix this as part of the change.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211106193509.17472-3-tzimmermann@suse.de
drm: Remove redundant 'flush_workqueue()' calls 2021-10-15T23:48:51+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2021-10-10T13:59:40+00:00 f8e7bce3a661408377366515118485a2c07f4860 'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Jyri Sarha <jyri.sarha@iki.fi> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://lore.kernel.org/r/75e8ba40076ad707d47e3a3670e6b23c1b8b11bc.1633874223.git.christophe.jaillet@wanadoo.fr Signed-off-by: Rob Clark <robdclark@chromium.org> 
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.

Remove the redundant 'flush_workqueue()' calls.

This was generated with coccinelle:

@@
expression E;
@@
- 	flush_workqueue(E);
	destroy_workqueue(E);

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jyri Sarha <jyri.sarha@iki.fi>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/75e8ba40076ad707d47e3a3670e6b23c1b8b11bc.1633874223.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Rob Clark <robdclark@chromium.org>
drm/tilcdc: Convert to Linux IRQ interfaces 2021-08-10T18:13:53+00:00 Thomas Zimmermann tzimmermann@suse.de 2021-08-03T09:07:01+00:00 b6366814fa77cfbc2a816614f7a981a9d1eadf8d Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. DRM IRQ callbacks are now being called directly or inlined. Calls to platform_get_irq() can fail with a negative errno code. Abort initialization in this case. The DRM IRQ midlayer does not handle this case correctly. For most drivers, only the DRM IRQ helpers use irq_enabled from struct drm_device. Tilcdc also uses irq_enabled to make its error rollback work correctly. As the field will become legacy, duplicated the state in the driver's local private structure. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-12-tzimmermann@suse.de 
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

Calls to platform_get_irq() can fail with a negative errno code.
Abort initialization in this case. The DRM IRQ midlayer does not
handle this case correctly.

For most drivers, only the DRM IRQ helpers use irq_enabled from
struct drm_device. Tilcdc also uses irq_enabled to make its error
rollback work correctly. As the field will become legacy, duplicated
the state in the driver's local private structure.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-12-tzimmermann@suse.de
drm/bridge: Centralize error message when bridge attach fails 2021-07-28T13:33:12+00:00 Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com 2021-03-23T21:50:08+00:00 fb8d617f8fd64f52f62e4f782aed64d1754ed33b Being informed of a failure to attach a bridge is useful, and many drivers prints an error message in that case. Move the message to drm_bridge_attach() to avoid code duplication. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi> 
Being informed of a failure to attach a bridge is useful, and many
drivers prints an error message in that case. Move the message to
drm_bridge_attach() to avoid code duplication.

Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
drm/tilcdc: fix pixel clock setting warning message 2021-03-24T10:05:28+00:00 Dario Binacchi dariobin@libero.it 2021-03-22T21:33:37+00:00 976677b5958ef7f9973ea8ba952a96b7243f2c13 The warning message did not printed the LCD pixel clock rate but the LCD clock divisor input rate. As a consequence, the required and real pixel clock rates are now passed to the tilcdc_pclk_diff(). Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/20210322213337.26667-4-dariobin@libero.it 
The warning message did not printed the LCD pixel clock rate but the LCD
clock divisor input rate. As a consequence, the required and real pixel
clock rates are now passed to the tilcdc_pclk_diff().

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322213337.26667-4-dariobin@libero.it
drm/tilcdc: fix LCD pixel clock setting 2021-03-24T10:05:28+00:00 Dario Binacchi dariobin@libero.it 2021-03-22T21:33:36+00:00 fd1d9e2d4382674f421bab003f9a64cc27b003f4 The tilcdc_pclk_diff() compares the requested pixel clock rate to the real one, so passing it clk_rate instead of clk_rate / clkdiv caused it to fail even if the clk_rate was properly set. Adding the real_pclk_rate variable makes the code more readable. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/20210322213337.26667-3-dariobin@libero.it 
The tilcdc_pclk_diff() compares the requested pixel clock rate to the
real one, so passing it clk_rate instead of clk_rate / clkdiv caused
it to fail even if the clk_rate was properly set. Adding the
real_pclk_rate variable makes the code more readable.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322213337.26667-3-dariobin@libero.it
drm/tilcdc: rename req_rate to pclk_rate 2021-03-24T10:05:28+00:00 Dario Binacchi dariobin@libero.it 2021-03-22T21:33:35+00:00 e17d1364dc3956e39980d12a3d8591bba4076f47 The req_rate name is a little misleading, so let's rename to pclk_rate (pixel clock rate). Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/20210322213337.26667-2-dariobin@libero.it 
The req_rate name is a little misleading, so let's rename to pclk_rate
(pixel clock rate).

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322213337.26667-2-dariobin@libero.it
drm/tilcdc: panel: fix platform_no_drv_owner.cocci warnings 2021-03-24T10:05:28+00:00 Yang Li yang.lee@linux.alibaba.com 2021-03-03T09:04:27+00:00 da588d48004a39cdaaa5f778ffc0debae0548541 ./drivers/gpu/drm/tilcdc/tilcdc_panel.c:402:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/1614762267-98454-1-git-send-email-yang.lee@linux.alibaba.com 
./drivers/gpu/drm/tilcdc/tilcdc_panel.c:402:3-8: No need to set .owner
here. The core will do it.

Remove .owner field if calls are used which set it automatically

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/1614762267-98454-1-git-send-email-yang.lee@linux.alibaba.com