When the extra HPD polling in sun4i_hdmi was removed, the result of
HPD was accidentally inverted.

Fix this by inverting the check.

Fixes: bda8eaa6dee7 ("drm: sun4i: hdmi: Remove extra HPD polling")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711011030.21997-1-wens@kernel.org

The HPD sense mechanism in Allwinner's old HDMI encoder hardware is more
or less an input-only GPIO. Other GPIO-based HPD implementations
directly return the current state, instead of polling for a specific
state and returning the other if that times out.

Remove the I/O polling from sun4i_hdmi_connector_detect() and directly
return a known state based on the current reading. This also gets rid
of excessive CPU usage by kworker as reported on Stack Exchange [1] and
Armbian forums [2].

 [1] https://superuser.com/questions/1515001/debian-10-buster-on-cubietruck-with-bug-in-sun4i-drm-hdmi
 [2] https://forum.armbian.com/topic/14282-headless-systems-and-sun4i_drm_hdmi-a10a20/

Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629060032.24134-1-wens@kernel.org

The main DRM device is actually a virtual device so it doesn't have the
iommus property, which is instead on the DMA masters, in this case the
mixers.

Add a call to of_dma_configure with the mixers DT node but on the DRM
virtual device to configure it in the same way than the mixers.

Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/9a4daf438dd3f2fe07afb23688bfb793a0613d7d.1589378833.git-series.maxime@cerno.tech
(cherry picked from commit b718102dbdfd0285ad559687a30e27cc9124e592)
[Maxime: Applied to -fixes since it missed the merge window and display is
         broken without it]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Pull drm fixes from Dave Airlie:
 "One sun4i fix and a connector hotplug race The ast fix is for a
  regression in 5.6, and one of the i915 ones fixes an oops reported by
  dhowells.

  core:
   - fix race in connectors sending hotplug

  i915:
   - Avoid use after free in cmdparser
   - Avoid NULL dereference when probing all display encoders
   - Fixup to module parameter type

  sun4i:
   - clock divider fix

  ast:
   - 24/32 bpp mode setting fix"

* tag 'drm-next-2020-06-11-1' of git://anongit.freedesktop.org/drm/drm:
  drm/ast: fix missing break in switch statement for format->cpp[0] case 4
  drm/sun4i: hdmi ddc clk: Fix size of m divider
  drm/i915/display: Only query DP state of a DDI encoder
  drm/i915/params: fix i915.reset module param type
  drm/i915/gem: Mark the buffer pool as active for the cmdparser
  drm/connector: notify userspace on hotplug after register complete

m divider in DDC clock register is 4 bits wide. Fix that.

Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200413095457.1176754-1-jernej.skrabec@siol.net

Pull media updates from Mauro Carvalho Chehab:

 - Media documentation is now split into admin-guide, driver-api and
   userspace-api books (a longstanding request from Jon);

 - The media Kconfig was reorganized, in order to make easier to select
   drivers and their dependencies;

 - The testing drivers now has a separate directory;

 - added a new driver for Rockchip Video Decoder IP;

 - The atomisp staging driver was resurrected. It is meant to work with
   4 generations of cameras on Atom-based laptops, tablets and cell
   phones. So, it seems worth investing time to cleanup this driver and
   making it in good shape.

 - Added some V4L2 core ancillary routines to help with h264 codecs;

 - Added an ov2740 image sensor driver;

 - The si2157 gained support for Analog TV, which, in turn, added
   support for some cx231xx and cx23885 boards to also support analog
   standards;

 - Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and
   V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera
   is located at the device;

 - VIDIOC_ENUM_FMT was extended to support MC-centric devices;

 - Lots of drivers improvements and cleanups.

* tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits)
  media: Documentation: media: Refer to mbus format documentation from CSI-2 docs
  media: s5k5baf: Replace zero-length array with flexible-array
  media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h>
  media: i2c: Add ov2740 image sensor driver
  media: ov8856: Implement sensor module revision identification
  media: ov8856: Add devicetree support
  media: dt-bindings: ov8856: Document YAML bindings
  media: dvb-usb: Add Cinergy S2 PCIe Dual Port support
  media: dvbdev: Fix tuner->demod media controller link
  media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging
  media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property
  media: atomisp: unify the version for isp2401 a0 and b0 versions
  media: atomisp: update TODO with the current data
  media: atomisp: adjust some code at sh_css that could be broken
  media: atomisp: don't produce errs for ignored IRQs
  media: atomisp: print IRQ when debugging
  media: atomisp: isp_mmu: don't use kmem_cache
  media: atomisp: add a notice about possible leak resources
  media: atomisp: disable the dynamic and reserved pools
  media: atomisp: turn on camera before setting it
  ...

Pull drm updates from Dave Airlie:
 "Highlights:

   - Core DRM had a lot of refactoring around managed drm resources to
     make drivers simpler.

   - Intel Tigerlake support is on by default

   - amdgpu now support p2p PCI buffer sharing and encrypted GPU memory

  Details:

  core:
   - uapi: error out EBUSY when existing master
   - uapi: rework SET/DROP MASTER permission handling
   - remove drm_pci.h
   - drm_pci* are now legacy
   - introduced managed DRM resources
   - subclassing support for drm_framebuffer
   - simple encoder helper
   - edid improvements
   - vblank + writeback documentation improved
   - drm/mm - optimise tree searches
   - port drivers to use devm_drm_dev_alloc

  dma-buf:
   - add flag for p2p buffer support

  mst:
   - ACT timeout improvements
   - remove drm_dp_mst_has_audio
   - don't use 2nd TX slot - spec recommends against it

  bridge:
   - dw-hdmi various improvements
   - chrontel ch7033 support
   - fix stack issues with old gcc

  hdmi:
   - add unpack function for drm infoframe

  fbdev:
   - misc fbdev driver fixes

  i915:
   - uapi: global sseu pinning
   - uapi: OA buffer polling
   - uapi: remove generated perf code
   - uapi: per-engine default property values in sysfs
   - Tigerlake GEN12 enabled.
   - Lots of gem refactoring
   - Tigerlake enablement patches
   - move to drm_device logging
   - Icelake gamma HW readout
   - push MST link retrain to hotplug work
   - bandwidth atomic helpers
   - ICL fixes
   - RPS/GT refactoring
   - Cherryview full-ppgtt support
   - i915 locking guidelines documented
   - require linear fb stride to be 512 multiple on gen9
   - Tigerlake SAGV support

  amdgpu:
   - uapi: encrypted GPU memory handling
   - uapi: add MEM_SYNC IB flag
   - p2p dma-buf support
   - export VRAM dma-bufs
   - FRU chip access support
   - RAS/SR-IOV updates
   - Powerplay locking fixes
   - VCN DPG (powergating) enablement
   - GFX10 clockgating fixes
   - DC fixes
   - GPU reset fixes
   - navi SDMA fix
   - expose FP16 for modesetting
   - DP 1.4 compliance fixes
   - gfx10 soft recovery
   - Improved Critical Thermal Faults handling
   - resizable BAR on gmc10

  amdkfd:
   - uapi: GWS resource management
   - track GPU memory per process
   - report PCI domain in topology

  radeon:
   - safe reg list generator fixes

  nouveau:
   - HD audio fixes on recent systems
   - vGPU detection (fail probe if we're on one, for now)
   - Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it)
   - SVM improvements/fixes
   - NVIDIA format modifier support
   - Misc other fixes.

  adv7511:
   - HDMI SPDIF support

  ast:
   - allocate crtc state size
   - fix double assignment
   - fix suspend

  bochs:
   - drop connector register

  cirrus:
   - move to tiny drivers.

  exynos:
   - fix imported dma-buf mapping
   - enable runtime PM
   - fixes and cleanups

  mediatek:
   - DPI pin mode swap
   - config mipi_tx current/impedance

  lima:
   - devfreq + cooling device support
   - task handling improvements
   - runtime PM support

  pl111:
   - vexpress init improvements
   - fix module auto-load

  rcar-du:
   - DT bindings conversion to YAML
   - Planes zpos sanity check and fix
   - MAINTAINERS entry for LVDS panel driver

  mcde:
   - fix return value

  mgag200:
   - use managed config init

  stm:
   - read endpoints from DT

  vboxvideo:
   - use PCI managed functions
   - drop WC mtrr

  vkms:
   - enable cursor by default

  rockchip:
   - afbc support

  virtio:
   - various cleanups

  qxl:
   - fix cursor notify port

  hisilicon:
   - 128-byte stride alignment fix

  sun4i:
   - improved format handling"

* tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits)
  drm/amd/display: Fix potential integer wraparound resulting in a hang
  drm/amd/display: drop cursor position check in atomic test
  drm/amdgpu: fix device attribute node create failed with multi gpu
  drm/nouveau: use correct conflicting framebuffer API
  drm/vblank: Fix -Wformat compile warnings on some arches
  drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode
  drm/amd/display: Handle GPU reset for DC block
  drm/amdgpu: add apu flags (v2)
  drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven
  drm/amdgpu: fix pm sysfs node handling (v2)
  drm/amdgpu: move gpu_info parsing after common early init
  drm/amdgpu: move discovery gfx config fetching
  drm/nouveau/dispnv50: fix runtime pm imbalance on error
  drm/nouveau: fix runtime pm imbalance on error
  drm/nouveau: fix runtime pm imbalance on error
  drm/nouveau/debugfs: fix runtime pm imbalance on error
  drm/nouveau/nouveau/hmm: fix migrate zero page to GPU
  drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations
  drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST
  drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes()
  ...

Older compilers warn about initializers with incorrect curly
braces:

drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c: In function 'sun6i_dsi_encoder_enable':
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:720:8: error: missing braces around initializer [-Werror=missing-braces]
  union phy_configure_opts opts = { 0 };
        ^
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:720:8: error: (near initialization for 'opts.mipi_dphy') [-Werror=missing-braces]

Use the GNU empty initializer extension to avoid this.

Fixes: bb3b6fcb6849 ("sun6i: dsi: Convert to generic phy handling")
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428215105.3928459-1-arnd@arndb.de

gpiod_get_value() can return negative values if an error occurs.
In several places this error code was ignored.

Ensure that errors codes are handled correctly throughout the CEC
pin framework and CEC pin drivers.

The return code of the cec_pin_ops read() callback had to be changed
from 'bool' to 'int', which mean the prototype of that callback in the
sun4i drm driver also had to be changed.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/5a6cf5a7-3f27-5425-4d6a-550a17bc51e3@web.de