linux-stable.git/drivers/gpu/drm/sun4i, branch linux-5.10.y

drm: sun4i_tcon: use devm_clk_get_enabled in `sun4i_tcon_init_clocks`

2023-07-27T06:43:46+00:00

[ Upstream commit 123ee07ba5b7123e0ce0e0f9d64938026c16a2ce ]

Smatch reports:
drivers/gpu/drm/sun4i/sun4i_tcon.c:805 sun4i_tcon_init_clocks() warn:
'tcon->clk' from clk_prepare_enable() not released on lines: 792,801.

In the function sun4i_tcon_init_clocks(), tcon->clk and tcon->sclk0 are
not disabled in the error handling, which affects the release of
these variable. Although sun4i_tcon_bind(), which calls
sun4i_tcon_init_clocks(), use sun4i_tcon_free_clocks to disable the
variables mentioned, but the error handling branch of
sun4i_tcon_init_clocks() ignores the required disable process.

To fix this issue, use the devm_clk_get_enabled to automatically
balance enable and disabled calls. As original implementation use
sun4i_tcon_free_clocks() to disable clk explicitly, we delete the
related calls and error handling that are no longer needed.

Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Fixes: b14e945bda8a ("drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init")
Fixes: 8e9240472522 ("drm/sun4i: support TCONs without channel 1")
Fixes: 34d698f6e349 ("drm/sun4i: Add has_channel_0 TCON quirk")
Signed-off-by: XuDong Liu 
Reviewed-by: Dongliang Mu 
Signed-off-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20230430112347.4689-1-m202071377@hust.edu.cn
Signed-off-by: Sasha Levin

drm/sun4i: fix missing component unbind on bind errors

2023-04-05T09:23:31+00:00

[ Upstream commit c22f2ff8724b49dce2ae797e9fbf4bc0fa91112f ]

Make sure to unbind all subcomponents when binding the aggregate device
fails.

Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Cc: stable@vger.kernel.org      # 4.7
Cc: Maxime Ripard 
Signed-off-by: Johan Hovold 
Signed-off-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20230306103242.4775-1-johan+linaro@kernel.org
Signed-off-by: Sasha Levin

drm/sun4i: dsi: Prevent underflow when computing packet sizes

2022-08-25T09:38:11+00:00

[ Upstream commit 82a1356a933d8443139f8886f11b63c974a09a67 ]

Currently, the packet overhead is subtracted using unsigned arithmetic.
With a short sync pulse, this could underflow and wrap around to near
the maximal u16 value. Fix this by using signed subtraction. The call to
max() will correctly handle any negative numbers that are produced.

Apply the same fix to the other timings, even though those subtractions
are less likely to underflow.

Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Samuel Holland 
Reviewed-by: Jernej Skrabec 
Signed-off-by: Maxime Ripard 
Link: https://lore.kernel.org/r/20220812031623.34057-1-samuel@sholland.org
Signed-off-by: Sasha Levin

drm/sun4i: Fix crash during suspend after component bind failure

2022-06-29T06:59:47+00:00

[ Upstream commit 1342b5b23da9559a1578978eaff7f797d8a87d91 ]

If the component driver fails to bind, or is unbound, the driver data
for the top-level platform device points to a freed drm_device. If the
system is then suspended, the driver passes this dangling pointer to
drm_mode_config_helper_suspend(), which crashes.

Fix this by only setting the driver data while the platform driver holds
a reference to the drm_device.

Fixes: 624b4b48d9d8 ("drm: sun4i: Add support for suspending the display driver")
Signed-off-by: Samuel Holland 
Reviewed-by: Jernej Skrabec 
Signed-off-by: Maxime Ripard 
Link: https://lore.kernel.org/r/20220615054254.16352-1-samuel@sholland.org
Signed-off-by: Sasha Levin

drm/sun4i: mixer: Fix P010 and P210 format numbers

2022-03-16T13:15:57+00:00

[ Upstream commit 9470c29faa91c804aa04de4c10634bf02462bfa5 ]

It turns out that DE3 manual has inverted YUV and YVU format numbers for
P010 and P210. Invert them.

This was tested by playing video decoded to P010 and additionally
confirmed by looking at BSP driver source.

Fixes: 169ca4b38932 ("drm/sun4i: Add separate DE3 VI layer formats")
Signed-off-by: Jernej Skrabec 
Signed-off-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20220228181436.1424550-1-jernej.skrabec@gmail.com
Signed-off-by: Sasha Levin

drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY

2021-12-08T08:03:18+00:00

[ Upstream commit bb162bb2b4394108c8f055d1b115735331205e28 ]

When PHY_SUN6I_MIPI_DPHY is selected, and RESET_CONTROLLER
is not selected, Kbuild gives the following warning:

WARNING: unmet direct dependencies detected for PHY_SUN6I_MIPI_DPHY
  Depends on [n]: (ARCH_SUNXI [=n] || COMPILE_TEST [=y]) && HAS_IOMEM [=y] && COMMON_CLK [=y] && RESET_CONTROLLER [=n]
  Selected by [y]:
  - DRM_SUN6I_DSI [=y] && HAS_IOMEM [=y] && DRM_SUN4I [=y]

This is because DRM_SUN6I_DSI selects PHY_SUN6I_MIPI_DPHY
without selecting or depending on RESET_CONTROLLER, despite
PHY_SUN6I_MIPI_DPHY depending on RESET_CONTROLLER.

These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.

v2:
Fixed indentation to match the rest of the file.

Signed-off-by: Julian Braha 
Acked-by: Jernej Skrabec 
Signed-off-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20211109032351.43322-1-julianbraha@gmail.com
Signed-off-by: Sasha Levin

drm/sun4i: Fix macros in sun8i_csc.h

2021-11-18T13:04:32+00:00

commit c302c98da646409d657a473da202f10f417f3ff1 upstream.

Macros SUN8I_CSC_CTRL() and SUN8I_CSC_COEFF() don't follow usual
recommendation of having arguments enclosed in parenthesis. While that
didn't change anything for quite sometime, it actually become important
after CSC code rework with commit ea067aee45a8 ("drm/sun4i: de2/de3:
Remove redundant CSC matrices").

Without this fix, colours are completely off for supported YVU formats
on SoCs with DE2 (A64, H3, R40, etc.).

Fix the issue by enclosing macro arguments in parenthesis.

Cc: stable@vger.kernel.org # 5.12+
Fixes: 883029390550 ("drm/sun4i: Add DE2 CSC library")
Reported-by: Roman Stratiienko 
Signed-off-by: Jernej Skrabec 
Reviewed-by: Chen-Yu Tsai 
Signed-off-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20210831184819.93670-1-jernej.skrabec@gmail.com
Signed-off-by: Greg Kroah-Hartman

drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup

2021-10-13T08:04:28+00:00

[ Upstream commit c64c8e04a12ed3e2238761e26cda78e72550dc98 ]

Recent rework, which made HDMI PHY driver a platform device, inadvertely
reversed clock setup order. HW is very touchy about it. Proper way is to
handle controllers resets and clocks first and HDMI PHYs second.

Currently, without this fix, first mode set completely fails (nothing on
HDMI monitor) on H3 era PHYs. On H6, it still somehow work.

Move HDMI PHY reset & clocks handling to sun8i_hdmi_phy_init() which
will assure that code is executed after controllers reset & clocks are
handled. Additionally, add sun8i_hdmi_phy_deinit() which will deinit
them at controllers driver unload.

Tested on A64, H3, H6 and R40.

Fixes: 9bf3797796f5 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device")
Signed-off-by: Jernej Skrabec 
Signed-off-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20210915175836.3158839-1-jernej.skrabec@gmail.com
Signed-off-by: Maarten Lankhorst 
Signed-off-by: Sasha Levin

drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device

2021-06-23T12:42:49+00:00

[ Upstream commit 9bf3797796f570b34438235a6a537df85832bdad ]

On sunxi boards that use HDMI output, HDMI device probe keeps being
avoided indefinitely with these repeated messages in dmesg:

  platform 1ee0000.hdmi: probe deferral - supplier 1ef0000.hdmi-phy
    not ready

There's a fwnode_link being created with fw_devlink=on between hdmi
and hdmi-phy nodes, because both nodes have 'compatible' property set.

Fw_devlink code assumes that nodes that have compatible property
set will also have a device associated with them by some driver
eventually. This is not the case with the current sun8i-hdmi
driver.

This commit makes sun8i-hdmi-phy into a proper platform device
and fixes the display pipeline probe on sunxi boards that use HDMI.

More context: https://lkml.org/lkml/2021/5/16/203

Signed-off-by: Saravana Kannan 
Signed-off-by: Ondrej Jirman 
Tested-by: Andre Przywara 
Signed-off-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20210607085836.2827429-1-megous@megous.com
Signed-off-by: Sasha Levin

drm/sun4i: tcon: fix inverted DCLK polarity

2021-03-04T10:37:41+00:00

[ Upstream commit 67f4aeb2b41a0629abde3794d463547f60b0cbdd ]

During commit 88bc4178568b ("drm: Use new
DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags") DRM_BUS_FLAG_*
macros have been changed to avoid ambiguity but just because of this
ambiguity previous DRM_BUS_FLAG_PIXDATA_(POS/NEG)EDGE were used meaning
_SAMPLE_ not _DRIVE_. This leads to DLCK inversion and need to fix but
instead of swapping phase values, let's adopt an easier approach Maxime
suggested:
It turned out that bit 26 of SUN4I_TCON0_IO_POL_REG is dedicated to
invert DCLK polarity and this makes things really easier than before. So
let's handle DCLK polarity by adding SUN4I_TCON0_IO_POL_DCLK_DRIVE_NEGEDGE
as bit 26 and activating according to bus_flags the same way it is done
for all the other signals polarity.

Fixes: 88bc4178568b ("drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags")
Suggested-by: Maxime Ripard 
Signed-off-by: Giulio Benetti 
Signed-off-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20210114081732.9386-1-giulio.benetti@benettiengineering.com
Signed-off-by: Sasha Levin