Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting KMS helpers and CMA will now automatically enable CMA KMS helpers. Some drivers' Kconfig files did not correctly select KMS or CMA helpers. Fix this as part of the change. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211106193509.17472-3-tzimmermann@suse.de
The correct format specifier for size_t is %zu. Using %d (or %u) generates a warning on 64-bit platforms. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Being informed of a failure to attach a bridge is useful, and many drivers prints an error message in that case. Move the message to drm_bridge_attach() to avoid code duplication. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
The field drm_device.irq_enabled is only used by legacy drivers with userspace modesetting. Don't set it in sti. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-19-tzimmermann@suse.de
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/sti/sti_hqvdp.c:796: warning: expecting prototype for sti_vdp_vtg_cb(). Prototype was for sti_hqvdp_vtg_cb() instead Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Fabien Dessenne <fabien.dessenne@st.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-9-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/sti/sti_tvout.c:166: warning: expecting prototype for Set the clipping mode of a VIP(). Prototype was for tvout_vip_set_color_order() instead drivers/gpu/drm/sti/sti_tvout.c:187: warning: expecting prototype for Set the clipping mode of a VIP(). Prototype was for tvout_vip_set_clip_mode() instead drivers/gpu/drm/sti/sti_tvout.c:203: warning: expecting prototype for Set the rounded value of a VIP(). Prototype was for tvout_vip_set_rnd() instead drivers/gpu/drm/sti/sti_tvout.c:223: warning: expecting prototype for Select the VIP input(). Prototype was for tvout_vip_set_sel_input() instead drivers/gpu/drm/sti/sti_tvout.c:258: warning: expecting prototype for Select the input video signed or unsigned(). Prototype was for tvout_vip_set_in_vid_fmt() instead drivers/gpu/drm/sti/sti_tvout.c:274: warning: expecting prototype for Set preformatter matrix(). Prototype was for tvout_preformatter_set_matrix() instead drivers/gpu/drm/sti/sti_tvout.c:299: warning: expecting prototype for Start VIP block for DVO output(). Prototype was for tvout_dvo_start() instead drivers/gpu/drm/sti/sti_tvout.c:353: warning: expecting prototype for Start VIP block for HDMI output(). Prototype was for tvout_hdmi_start() instead drivers/gpu/drm/sti/sti_tvout.c:402: warning: expecting prototype for Start HDF VIP and HD DAC(). Prototype was for tvout_hda_start() instead Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-8-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/sti/sti_hda.c:283: warning: expecting prototype for Search for a video mode in the supported modes table(). Prototype was for hda_get_mode_idx() instead drivers/gpu/drm/sti/sti_hda.c:301: warning: expecting prototype for Enable the HD DACS(). Prototype was for hda_enable_hd_dacs() instead drivers/gpu/drm/sti/sti_hda.c:383: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Fabien Dessenne <fabien.dessenne@st.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-7-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c:77: warning: expecting prototype for Start hdmi phy macro cell tx3g4c28(). Prototype was for sti_hdmi_tx3g4c28phy_start() instead drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c:187: warning: expecting prototype for Stop hdmi phy macro cell tx3g4c28(). Prototype was for sti_hdmi_tx3g4c28phy_stop() instead Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-6-lee.jones@linaro.org
Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_update or atomic_disable hooks,
which would be the new plane state in the global atomic state since
_swap_state happened when those hooks are run.
Use the drm_atomic_get_new_plane_state helper to get that state to make it
more obvious.
This was made using the coccinelle script below:
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)
@ adds_new_state @
identifier plane_atomic_func.func;
identifier plane, state;
identifier new_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state)
{
...
- struct drm_plane_state *new_state = plane->state;
+ struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.
The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.
Let's convert the remaining helpers to provide a consistent interface,
this time with the planes atomic_update and atomic_disable.
The conversion was done using the coccinelle script below, built tested on
all the drivers.
@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
void (*atomic_update)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}
@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
void (*atomic_disable)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
)
@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier crtc_state;
identifier plane, plane_state, state;
expression e;
@@
f(struct drm_crtc_state *crtc_state)
{
...
struct drm_atomic_state *state = e;
<+...
(
- FUNCS->atomic_disable(plane, plane_state)
+ FUNCS->atomic_disable(plane, state)
|
- FUNCS->atomic_update(plane, plane_state)
+ FUNCS->atomic_update(plane, state)
)
...+>
}
@@
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *state)
+ struct drm_plane_state *old_plane_state)
{
<...
- state
+ old_plane_state
...>
}
@ ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, old_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
... when != old_state
}
@ adds_old_state depends on plane_atomic_func && !ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *plane_state)
{
+ struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
...
}
@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *plane_state
+ struct drm_atomic_state *state
)
{ ... }
@ include depends on adds_old_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_old_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
<+...
- plane_state->state
+ state
...+>
}
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech