linux-stable.git/drivers/gpu/drm/rockchip, branch v5.13.2

drm/rockchip: cdn-dp: fix sign extension on an int multiply for a u64 result

2021-07-14T15:06:59+00:00

[ Upstream commit ce0cb93a5adb283f577cd4661f511047b5e39028 ]

The variable bit_per_pix is a u8 and is promoted in the multiplication
to an int type and then sign extended to a u64. If the result of the
int multiplication is greater than 0x7fffffff then the upper 32 bits will
be set to 1 as a result of the sign extension. Avoid this by casting
tu_size_reg to u64 to avoid sign extension and also a potential overflow.

Fixes: 1a0f7ed3abe2 ("drm/rockchip: cdn-dp: add cdn DP support for rk3399")
Signed-off-by: Colin Ian King 
Reviewed-by: Guenter Roeck 
Signed-off-by: Heiko Stuebner 
Link: https://patchwork.freedesktop.org/patch/msgid/20200915162049.36434-1-colin.king@canonical.com
Signed-off-by: Sasha Levin

drm/rockchip: lvds: Fix an error handling path

2021-07-14T15:06:59+00:00

[ Upstream commit 3dfa159f6b0c054eb63673fbf643a5f2cc862e63 ]

'ret' is know to be 0 a this point. Checking the return value of
'phy_init()' and 'phy_set_mode()' was intended instead.

So add the missing assignments.

Fixes: cca1705c3d89 ("drm/rockchip: lvds: Add PX30 support")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Heiko Stuebner 
Link: https://patchwork.freedesktop.org/patch/msgid/248220d4815dc8c8088cebfab7d6df5f70518438.1619881852.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin

drm/rockchip: dsi: move all lane config except LCDC mux to bind()

2021-07-14T15:06:59+00:00

[ Upstream commit 43c2de1002d2b70fb5941fa14e97a34e3dc214d4 ]

When we first enable the DSI encoder, we currently program some per-chip
configuration that we look up in rk3399_chip_data based on the device
tree compatible we match. This data configures various parameters of the
MIPI lanes, including on RK3399 whether DSI1 is slaved to DSI0 in a
dual-mode configuration. It also selects which LCDC (i.e. VOP) to scan
out from.

This causes a problem in RK3399 dual-mode configurations, though: panel
prepare() callbacks run before the encoder gets enabled and expect to be
able to write commands to the DSI bus, but the bus isn't fully
functional until the lane and master/slave configuration have been
programmed. As a result, dual-mode panels (and possibly others too) fail
to turn on when the rockchipdrm driver is initially loaded.

Because the LCDC mux is the only thing we don't know until enable time
(and is the only thing that can ever change), we can actually move most
of the initialization to bind() and get it out of the way early. That's
what this change does. (Rockchip's 4.4 BSP kernel does it in mode_set(),
which also avoids the issue, but bind() seems like the more correct
place to me.)

Tested on a Google Scarlet board (Acer Chromebook Tab 10), which has a
Kingdisplay KD097D04 dual-mode panel. Prior to this change, the panel's
backlight would turn on but no image would appear when initially loading
rockchipdrm. If I kept rockchipdrm loaded and reloaded the panel driver,
it would come on. With this change, the panel successfully turns on
during initial rockchipdrm load as expected.

Fixes: 2d4f7bdafd70 ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver")
Signed-off-by: Thomas Hebb
Tested-by: Jonathan Liu
Signed-off-by: Heiko Stuebner
Link: https://patchwork.freedesktop.org/patch/msgid/55fe7f3454d8c91dc3837ba5aa741d4a0e67378f.1618797813.git.tommyhebb@gmail.com
Signed-off-by: Sasha Levin

drm/rockchip: cdn-dp-core: add missing clk_disable_unprepare() on error in cdn_dp_grf_write()

2021-07-14T15:06:59+00:00

[ Upstream commit ae41d925c75b53798f289c69ee8d9f7d36432f6d ]

After calling clk_prepare_enable(), clk_disable_unprepare() need
be called when calling regmap_write() failed.

Fixes: 1a0f7ed3abe2 ("drm/rockchip: cdn-dp: add cdn DP support for rk3399")
Reported-by: Hulk Robot 
Signed-off-by: Yang Yingliang 
Signed-off-by: Heiko Stuebner 
Link: https://patchwork.freedesktop.org/patch/msgid/20210519134928.2696617-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin

drm: rockchip: set alpha_en to 0 if it is not used

2021-07-14T15:06:59+00:00

[ Upstream commit 046e0db975695540c9d9898cdbf0b60533d28afb ]

alpha_en should be set to 0 if it is not used, i.e. to disable alpha
blending if it was enabled before and should be disabled now.

Fixes: 2aae8ed1f390 ("drm/rockchip: Add per-pixel alpha support for the PX30 VOP")
Signed-off-by: Alex Bee 
Signed-off-by: Heiko Stuebner 
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130554.72191-6-knaerzche@gmail.com
Signed-off-by: Sasha Levin

drm/rockchip: Remove unused variable

2021-03-24T08:31:22+00:00

Commit 977697e20b3d ("drm/atomic: Pass the full state to planes atomic
disable and update") added the old_state variable instead of what used
to be a parameter, but it also removed the sole user of that variable in
the vop_plane_atomic_update function leading to an usused variable.
Remove it.

Fixes: 977697e20b3d ("drm/atomic: Pass the full state to planes atomic disable and update")
Reported-by: Stephen Rothwell 
Signed-off-by: Maxime Ripard 
Reviewed-by: Laurent Pinchart 
Link: https://patchwork.freedesktop.org/patch/msgid/20210319152920.262035-1-maxime@cerno.tech

Merge tag 'drm-misc-next-2021-03-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2021-03-16T07:08:46+00:00

drm-misc-next for 5.13:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
  - %p4cc printk format modifier
  - atomic: introduce drm_crtc_commit_wait, rework atomic plane state
    helpers to take the drm_commit_state structure
  - dma-buf: heaps rework to return a struct dma_buf
  - simple-kms: Add plate state helpers
  - ttm: debugfs support, removal of sysfs

Driver Changes:
  - Convert drivers to shadow plane helpers
  - arc: Move to drm/tiny
  - ast: cursor plane reworks
  - gma500: Remove TTM and medfield support
  - mxsfb: imx8mm support
  - panfrost: MMU IRQ handling rework
  - qxl: rework to better handle resources deallocation, locking
  - sun4i: Add alpha properties for UI and VI layers
  - vc4: RPi4 CEC support
  - vmwgfx: doc cleanup

Signed-off-by: Dave Airlie 

From: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour

drm/rockchip: Require the YTR modifier for AFBC

2021-02-25T09:18:45+00:00

The AFBC decoder used in the Rockchip VOP assumes the use of the
YUV-like colourspace transform (YTR). YTR is lossless for RGB(A)
buffers, which covers the RGBA8 and RGB565 formats supported in
vop_convert_afbc_format. Use of YTR is signaled with the
AFBC_FORMAT_MOD_YTR modifier, which prior to this commit was missing. As
such, a producer would have to generate buffers that do not use YTR,
which the VOP would erroneously decode as YTR, leading to severe visual
corruption.

The upstream AFBC support was developed against a captured frame, which
failed to exercise modifier support. Prior to bring-up of AFBC in Mesa
(in the Panfrost driver), no open userspace respected modifier
reporting. As such, this change is not expected to affect broken
userspaces.

Tested on RK3399 with Panfrost and Weston.

Fixes: 7707f7227f09 ("drm/rockchip: Add support for afbc")
Cc: stable@vger.kernel.org
Signed-off-by: Alyssa Rosenzweig 
Acked-by: Daniel Stone 
Signed-off-by: Heiko Stuebner 
Link: https://patchwork.freedesktop.org/patch/msgid/20200811202631.3603-1-alyssa.rosenzweig@collabora.com
Signed-off-by: Maarten Lankhorst

drm: Use state helper instead of the plane state pointer

2021-02-25T07:05:28+00:00

Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_update or atomic_disable hooks,
which would be the new plane state in the global atomic state since
_swap_state happened when those hooks are run.

Use the drm_atomic_get_new_plane_state helper to get that state to make it
more obvious.

This was made using the coccinelle script below:

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

(
 static const struct drm_plane_helper_funcs helpers = {
 	...,
 	.atomic_disable = func,
	...,
 };
|
 static const struct drm_plane_helper_funcs helpers = {
 	...,
 	.atomic_update = func,
	...,
 };
)

@ adds_new_state @
identifier plane_atomic_func.func;
identifier plane, state;
identifier new_state;
@@

 func(struct drm_plane *plane, struct drm_atomic_state *state)
 {
 	...
-	struct drm_plane_state *new_state = plane->state;
+	struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
	...
 }

@ include depends on adds_new_state @
@@

 #include 

@ no_include depends on !include && adds_new_state @
@@

+ #include 
  #include 

Reviewed-by: Ville Syrjälä 
Signed-off-by: Maxime Ripard 
Acked-by: Thomas Zimmermann 
Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech

drm/atomic: Pass the full state to planes atomic disable and update

2021-02-25T07:05:28+00:00

The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Let's convert the remaining helpers to provide a consistent interface,
this time with the planes atomic_update and atomic_disable.

The conversion was done using the coccinelle script below, built tested on
all the drivers.

@@
identifier plane, plane_state;
symbol state;
@@

 struct drm_plane_helper_funcs {
 	...
	void (*atomic_update)(struct drm_plane *plane,
-			      struct drm_plane_state *plane_state);
+			      struct drm_atomic_state *state);
 	...
 }

@@
identifier plane, plane_state;
symbol state;
@@

 struct drm_plane_helper_funcs {
	...
	void (*atomic_disable)(struct drm_plane *plane,
-			       struct drm_plane_state *plane_state);
+			       struct drm_atomic_state *state);
	...
 }

@ plane_atomic_func @
identifier helpers;
identifier func;
@@

(
 static const struct drm_plane_helper_funcs helpers = {
 	...,
 	.atomic_update = func,
	...,
 };
|
 static const struct drm_plane_helper_funcs helpers = {
 	...,
 	.atomic_disable = func,
	...,
 };
)

@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier crtc_state;
identifier plane, plane_state, state;
expression e;
@@

 f(struct drm_crtc_state *crtc_state)
 {
 	...
 	struct drm_atomic_state *state = e;
 	<+...
(
-	FUNCS->atomic_disable(plane, plane_state)
+	FUNCS->atomic_disable(plane, state)
|
-	FUNCS->atomic_update(plane, plane_state)
+	FUNCS->atomic_update(plane, state)
)
 	...+>
 }

@@
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@

 func(struct drm_plane *plane,
-    struct drm_plane_state *state)
+    struct drm_plane_state *old_plane_state)
 {
	<...
-	state
+	old_plane_state
	...>
 }

@ ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, old_state;
@@

 func(struct drm_plane *plane, struct drm_plane_state *old_state)
 {
	... when != old_state
 }

@ adds_old_state depends on plane_atomic_func && !ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@

 func(struct drm_plane *plane, struct drm_plane_state *plane_state)
 {
+	struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
 	...
 }

@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@

 func(struct drm_plane *plane,
-     struct drm_plane_state *plane_state
+     struct drm_atomic_state *state
     )
 { ... }

@ include depends on adds_old_state @
@@

 #include 

@ no_include depends on !include && adds_old_state @
@@

+ #include 
  #include 

@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@

 func(struct drm_plane *plane, struct drm_atomic_state *state) {
 	...
 	struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
 	<+...
-	plane_state->state
+	state
 	...+>
 }

Reviewed-by: Laurent Pinchart 
Signed-off-by: Maxime Ripard 
Acked-by: Thomas Zimmermann 
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech