The Rockchip dw_hdmi driver just called platform_set_drvdata() to get your hopes up that maybe, somehow, you'd be able to retrieve the 'struct rockchip_hdmi' from a pointer to the 'struct device'. You can't. When we call dw_hdmi_bind() the main driver calls dev_set_drvdata(), which clobbers our setting. Let's just remove the platform_set_drvdata() to avoid dashing people's hopes. Signed-off-by: Douglas Anderson <dianders@chromium.org>
This fixes a few problems in the vop crtc cleanup (handling error paths and cleanup upon exit): * The vop_create_crtc() error path had an unsafe version of the iterator used for iterating over all planes (though it was destroying planes in the iterator so should have used the safe version) * vop_destroy_crtc() - wasn't calling vop_plane_destroy(), which made slub_debug unhappy, at least if we ended up running this due to a deferred probe. * In vop_create_crtc() if we were missing the "port" device tree node we would fail but not return an error (found by code inspection). Fix these problems. Signed-off-by: Douglas Anderson <dianders@chromium.org>
The drm_encoder_cleanup() was missing both from the error path of dw_hdmi_rockchip_bind(). This caused a crash when slub_debug was enabled and we ended up deferring probe of HDMI at boot. This call isn't needed from unbind() because if dw_hdmi_bind() returns no error then it takes over the job of freeing the encoder (in dw_hdmi_unbind). Signed-off-by: Douglas Anderson <dianders@chromium.org>
When a VOP is re-enabled, it will start scanning right away the framebuffers that were configured from the last time, even if those have been destroyed already. To prevent the VOP from trying to access freed memory, disable all its windows when the CRTC is being disabled, then each window will get a valid framebuffer address before it's enabled again. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Link: http://lkml.kernel.org/g/CAAObsKAv+05ih5U+=4kic_NsjGMhfxYheHR8xXXmacZs+p5SHw@mail.gmail.com
So that when DRM_IOCTL_MODE_SETCRTC is called without a FB nor mode, the CRTC gets disabled. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Link: http://lkml.kernel.org/g/CAAObsKAv+05ih5U+=4kic_NsjGMhfxYheHR8xXXmacZs+p5SHw@mail.gmail.com
When closing the DRM device while a vblank is pending, we access file_priv after it has been free'd, which gives: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... PC is at __list_add+0x5c/0xe8 LR is at send_vblank_event+0x54/0x1f0 ... [<c02952e8>] (__list_add) from [<c031a7b4>] (send_vblank_event+0x54/0x1f0) [<c031a760>] (send_vblank_event) from [<c031a9c0>] (drm_send_vblank_event+0x70/0x78) [<c031a950>] (drm_send_vblank_event) from [<c031a9f8>] (drm_crtc_send_vblank_event+0x30/0x34) [<c031a9c8>] (drm_crtc_send_vblank_event) from [<c0339ad8>] (vop_isr+0x224/0x28c) [<c03398b4>] (vop_isr) from [<c0081780>] (handle_irq_event_percpu+0x12c/0x3e4) This can be triggered somewhat reliably with: modetest -M rockchip -v -s ... Add a preclose hook to the driver so that we can discard any pending vblank events when the device is closed. Signed-off-by: John Keeping <john@metanate.com>
If the geometry of a crtc is changing in an atomic update then we must validate the plane size against the new state of the crtc and not the current size, otherwise if the crtc size is increasing the plane will be cropped at the previous size and will not fill the screen. Signed-off-by: John Keeping <john@metanate.com>
imx-drm vblank IRQ control, fence support, and of endpoint helpers - Add and make use of drm_of_active_endpoint helpers - Silence a noisy dev_info into a dev_dbg - Stop touching primary fb on pageflips - Track flip state explicitly - Keep GEM buffer objects referenced while scanout is active - Implement fence sync by deferring flips to a workqueue for dma-bufs with pending fences - Actually disable vblank IRQs while they are not needed * tag 'imx-drm-next-20160301' of git://git.pengutronix.de/git/pza/linux: drm/imx: only enable vblank IRQs when needed drm/imx: implement fence sync drm/imx: keep GEM object referenced as long as scanout is active drm/imx: track flip state explicitly drm/imx: don't touch primary fb on pageflip drm/imx: ipuv3 plane: Replace dev_info with dev_dbg if a plane's CRTC changes gpu: ipu-v3: ipu-dc: Simplify display controller microcode setup drm/rockchip: remove rockchip_drm_encoder_get_mux_id drm/imx: remove imx_drm_encoder_get_mux_id drm: add drm_of_encoder_active_endpoint helpers
It is replaced by drm_of_encoder_active_endpoint_id. Suggested-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Yakir Yang <ykk@rock-chips.com> [for dw_hdmi-rockchip] Acked-by: Mark Yao <mark.yao@rock-chips.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
add Innosilicon HDMI support. * 'drm-rockchip-next-2016-02-18' of https://github.com/markyzq/kernel-drm-rockchip: dt-bindings: add document for Innosilicon HDMI on Rockchip platform drm/rockchip: hdmi: add Innosilicon HDMI support