linux-stable.git/drivers/gpu/drm/radeon, branch v3.4

drm/radeon: clarify and extend wb setup on APUs and NI+ asics

2012-05-04T08:36:11+00:00

Use family rather than DCE check for clarity, also always use
wb on APUs, there will never be AGP variants.

Signed-off-by: Alex Deucher 
Reviewed-by: Michel Dänzer 
Signed-off-by: Dave Airlie

drm/radeon/kms: need to set up ss on DP bridges as well

2012-04-28T07:04:34+00:00

Makes Nutmeg DP to VGA bridges work for me.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=42490

Noticed by Jerome Glisse (after weeks of debugging).

Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie

drm/radeon/kms: use frac fb div on APUs

2012-04-27T07:30:19+00:00

Seems to be more stable on certain monitors.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=48880

Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie

drm/radeon: add a missing entry to encoder_names

2012-04-27T07:29:50+00:00

An entry for INTERNAL_VCE encoder was missing. Add it.

Signed-off-by: Ilija Hadzic 
Reviewed-by: Alex Deucher 
Signed-off-by: Dave Airlie

drm/radeon: fix load detect on rn50 with hardcoded EDIDs.

2012-04-19T15:02:18+00:00

When the force changes went in back in 3.3.0, we ended up returning
disconnected in the !force case, and the connected in when forced,
as it hit the hardcoded check.

Fix it so all exits go via the hardcoded check and stop spurious
modesets on platforms with hardcoded EDIDs.

Reported-by: Evan McNabb (Red Hat)
Reviewed-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie

radeon: fix r600/agp when vram is after AGP (v3)

2012-04-19T13:37:42+00:00

If AGP is placed in the middle, the size_af is off-by-one, it results
in VRAM being placed at 0x7fffffff instead of 0x8000000.

v2: fix the vram_start setup.
v3: also fix r7xx & newer ASIC

Reported-by: russiane39 on #radeon

Signed-off-by: Jerome Glisse 
Signed-off-by: Dave Airlie

drm/radeon/kms: fix the regression of DVI connector check

2012-04-19T13:01:10+00:00

The check of the encoder type in the commit [e00e8b5e: drm/radeon/kms:
fix analog load detection on DVI-I connectors] is obviously wrong, and
it's the culprit of the regression on my workstation with DVI-analog
connection resulting in the blank output.

Fixed the typo now.

Signed-off-by: Takashi Iwai 
Reviewed-by: Alex Deucher 
Cc: 
Signed-off-by: Dave Airlie

drm/radeon/si: add missing radeon_bo_unreserve in si_rlc_init() v2

2012-04-16T12:42:04+00:00

Forget to unreserve after pinning.  This can lead to problems in
soft reset and resume.

v2: rework patch as per Michel's suggestion.

Signed-off-by: Alex Deucher 
Reviewed-by: Michel Dänzer 
Signed-off-by: Dave Airlie

drm/radeon: disable MSI on RV515

2012-04-16T12:40:04+00:00

My rv515 card is very flaky with msi enabled. Every so often it loses a rearm
and never comes back, manually banging the rearm brings it back.

Reviewed-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie

drm/radeon: only add the mm i2c bus if the hw_i2c module param is set

2012-04-11T08:36:53+00:00

It seems it can corrupt the monitor EDID in certain cases on certain
boards when running sensors detect.  It's rarely used anyway outside
of AIW boards.

http://lists.lm-sensors.org/pipermail/lm-sensors/2012-April/035847.html
http://lists.freedesktop.org/archives/xorg/2011-January/052239.html

Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Acked-by: Jean Delvare 
Signed-off-by: Dave Airlie