Switch to panel timings based on datasheet for the AUO G101EVN01.0
LVDS panel. Default timings were tested on the panel.

Previous mode-based timings resulted in horizontal display shift.

Signed-off-by: Kevin Baker <kevinb@ventureresearch.com>
Fixes: 4fb86404a977 ("drm/panel: simple: Add AUO G101EVN010 panel support")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com

commit a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity")
fixed reset signal polarity in jadard_dsi_probe() and jadard_prepare().

It was not done in jadard_unprepare() because of an incorrect assumption
about reset line handling in power off mode. After looking into the
datasheet, it now appears that before disabling regulators, the reset line
is deasserted first, and if reset_before_power_off_vcioo is true, then the
reset line is asserted.

Fix reset polarity by inverting gpiod_set_value() second argument in
in jadard_unprepare().

Fixes: 6b818c533dd8 ("drm: panel: Add Jadard JD9365DA-H3 DSI panel")
Fixes: 2b976ad760dc ("drm/panel: jd9365da: Support for kd101ne3-40ti MIPI-DSI panel")
Fixes: a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com

The newly added driver uses the DSC helpers, so the corresponding
Kconfig option must be enabled:

ERROR: modpost: "drm_dsc_pps_payload_pack" [drivers/gpu/drm/panel/panel-visionox-rm692e5.ko] undefined!

Fixes: 7cb3274341bf ("drm/panel: Add Visionox RM692E5 panel driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304142907.732196-1-arnd@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

Add the driver for Visionox RM692E5 panel support found in Nothing
Phone (1).

Signed-off-by: Eugene Lepshy <fekz115@gmail.com>
Co-developed-by: Danila Tikhonov <danila@jiaxyga.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250217222431.82522-3-danila@jiaxyga.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217222431.82522-3-danila@jiaxyga.com

The Rockchip W552793DBA-V10 display/touchscreen board contains a
Wanchanglong W552793BAA panel, which in turn is using a Raydium
RM67200 MIPI-DSI controller. Add a DSI panel driver for it.

The W552793BAA panel init sequence has been taken from the RK3588
EVB1 vendor kernel devicetree.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250225-raydium-rm67200-v3-2-d9e1010dd8ab@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250225-raydium-rm67200-v3-2-d9e1010dd8ab@kernel.org

Backmerging to get fixes from v6.14-rc4.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

This is the display panel used for the touchbar on laptops that have it.

Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250217-adpdrm-v7-3-ca2e44b3c7d8@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217-adpdrm-v7-3-ca2e44b3c7d8@gmail.com

Add support for the BOE AV123Z7M-N17 12.3" LVDS panel.

Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250224-initial_display-v1-8-5ccbbf613543@gocontroll.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224-initial_display-v1-8-5ccbbf613543@gocontroll.com

add support for the BOE AV101HDT-A10 10.1" LVDS panel

Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250224-initial_display-v1-7-5ccbbf613543@gocontroll.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224-initial_display-v1-7-5ccbbf613543@gocontroll.com

Removes mipi_dsi_dcs_set_tear_off and replaces it with a
multi version as after replacing it in sony-td4353-jdi, it doesn't
appear anywhere else. sony-td4353-jdi is converted to use multi style
functions, including mipi_dsi_dcs_set_tear_off_multi.

Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250220045721.145905-1-tejasvipin76@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220045721.145905-1-tejasvipin76@gmail.com