linux-stable.git/drivers/gpu/drm/panel, branch v6.10 Linux kernel stable tree drm/panel: simple: Add missing display timing flags for KOE TX26D202VM0BWA 2024-06-24T09:06:08+00:00 Liu Ying victor.liu@nxp.com 2024-06-24T01:56:12+00:00 37ce99b77762256ec9fda58d58fd613230151456 KOE TX26D202VM0BWA panel spec indicates the DE signal is active high in timing chart, so add DISPLAY_FLAGS_DE_HIGH flag in display timing flags. This aligns display_timing with panel_desc. Fixes: 8a07052440c2 ("drm/panel: simple: Add support for KOE TX26D202VM0BWA panel") Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240624015612.341983-1-victor.liu@nxp.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240624015612.341983-1-victor.liu@nxp.com 
KOE TX26D202VM0BWA panel spec indicates the DE signal is active high in
timing chart, so add DISPLAY_FLAGS_DE_HIGH flag in display timing flags.
This aligns display_timing with panel_desc.

Fixes: 8a07052440c2 ("drm/panel: simple: Add support for KOE TX26D202VM0BWA panel")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240624015612.341983-1-victor.liu@nxp.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624015612.341983-1-victor.liu@nxp.com
drm/panel: sitronix-st7789v: Add check for of_drm_get_panel_orientation 2024-06-03T08:46:36+00:00 Chen Ni nichen@iscas.ac.cn 2024-05-28T03:08:32+00:00 629f2b4e05225e53125aaf7ff0b87d5d53897128 Add check for the return value of of_drm_get_panel_orientation() and return the error if it fails in order to catch the error. Fixes: b27c0f6d208d ("drm/panel: sitronix-st7789v: add panel orientation support") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net> Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240528030832.2529471-1-nichen@iscas.ac.cn Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240528030832.2529471-1-nichen@iscas.ac.cn 
Add check for the return value of of_drm_get_panel_orientation() and
return the error if it fails in order to catch the error.

Fixes: b27c0f6d208d ("drm/panel: sitronix-st7789v: add panel orientation support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240528030832.2529471-1-nichen@iscas.ac.cn
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528030832.2529471-1-nichen@iscas.ac.cn
drm/panel: sitronix-st7789v: fix display size for jt240mhqs_hwt_ek_e3 panel 2024-05-30T12:57:33+00:00 Gerald Loacker gerald.loacker@wolfvision.net 2024-05-29T14:42:47+00:00 b62c150c3bae72ac1910dcc588f360159eb0744a This is a portrait mode display. Change the dimensions accordingly. Fixes: 0fbbe96bfa08 ("drm/panel: sitronix-st7789v: add jasonic jt240mhqs-hwt-ek-e3 support") Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net> Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-3-e4821802443d@wolfvision.net Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-3-e4821802443d@wolfvision.net 
This is a portrait mode display. Change the dimensions accordingly.

Fixes: 0fbbe96bfa08 ("drm/panel: sitronix-st7789v: add jasonic jt240mhqs-hwt-ek-e3 support")
Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-3-e4821802443d@wolfvision.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-3-e4821802443d@wolfvision.net
drm/panel: sitronix-st7789v: tweak timing for jt240mhqs_hwt_ek_e3 panel 2024-05-30T12:57:33+00:00 Gerald Loacker gerald.loacker@wolfvision.net 2024-05-29T14:42:46+00:00 2ba50582634d0bfe3a333ab7575a7f0122a7cde8 Use the default timing parameters to get a refresh rate of about 60 Hz for a clock of 6 MHz. Fixes: 0fbbe96bfa08 ("drm/panel: sitronix-st7789v: add jasonic jt240mhqs-hwt-ek-e3 support") Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net> Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-2-e4821802443d@wolfvision.net Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-2-e4821802443d@wolfvision.net 
Use the default timing parameters to get a refresh rate of about 60 Hz for
a clock of 6 MHz.

Fixes: 0fbbe96bfa08 ("drm/panel: sitronix-st7789v: add jasonic jt240mhqs-hwt-ek-e3 support")
Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-2-e4821802443d@wolfvision.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-2-e4821802443d@wolfvision.net
drm/panel: sitronix-st7789v: fix timing for jt240mhqs_hwt_ek_e3 panel 2024-05-30T12:57:32+00:00 Gerald Loacker gerald.loacker@wolfvision.net 2024-05-29T14:42:45+00:00 0e5895ff7fab0fc05ec17daf9a568368828fa6ea Flickering was observed when using partial mode. Moving the vsync to the same position as used by the default sitronix-st7789v timing resolves this issue. Fixes: 0fbbe96bfa08 ("drm/panel: sitronix-st7789v: add jasonic jt240mhqs-hwt-ek-e3 support") Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net> Link: https://lore.kernel.org/r/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-1-e4821802443d@wolfvision.net Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-1-e4821802443d@wolfvision.net 
Flickering was observed when using partial mode. Moving the vsync to the
same position as used by the default sitronix-st7789v timing resolves this
issue.

Fixes: 0fbbe96bfa08 ("drm/panel: sitronix-st7789v: add jasonic jt240mhqs-hwt-ek-e3 support")
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Link: https://lore.kernel.org/r/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-1-e4821802443d@wolfvision.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409-bugfix-jt240mhqs_hwt_ek_e3-timing-v2-1-e4821802443d@wolfvision.net
drm/panel/lg-sw43408: mark sw43408_backlight_ops as static 2024-05-29T08:35:32+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2024-05-28T19:39:19+00:00 8c318cb70c88aa02068db7518e852b909c9b400f Fix sparse warning regarding symbol 'sw43408_backlight_ops' not being declared. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404200739.hbWZvOhR-lkp@intel.com/ Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Fixes: 069a6c0e94f9 ("drm: panel: Add LG sw43408 panel driver") Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240528-panel-sw43408-fix-v4-2-330b42445bcc@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> 
Fix sparse warning regarding symbol 'sw43408_backlight_ops' not being
declared.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404200739.hbWZvOhR-lkp@intel.com/
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Fixes: 069a6c0e94f9 ("drm: panel: Add LG sw43408 panel driver")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528-panel-sw43408-fix-v4-2-330b42445bcc@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/panel/lg-sw43408: select CONFIG_DRM_DISPLAY_DP_HELPER 2024-05-29T08:35:32+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2024-05-28T19:39:18+00:00 33defcacd207196a6b35857087e6335590adad62 This panel driver uses DSC PPS functions and as such depends on the DRM_DISPLAY_DP_HELPER. Select this symbol to make required functions available to the driver. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404200800.kYsRYyli-lkp@intel.com/ Fixes: 069a6c0e94f9 ("drm: panel: Add LG sw43408 panel driver") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240528-panel-sw43408-fix-v4-1-330b42445bcc@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> 
This panel driver uses DSC PPS functions and as such depends on the
DRM_DISPLAY_DP_HELPER. Select this symbol to make required functions
available to the driver.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404200800.kYsRYyli-lkp@intel.com/
Fixes: 069a6c0e94f9 ("drm: panel: Add LG sw43408 panel driver")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528-panel-sw43408-fix-v4-1-330b42445bcc@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel 2024-05-15T16:43:42+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-05-15T16:43:42+00:00 db5d28c0bfe566908719bec8e25443aabecbb802 Pull drm updates from Dave Airlie: "This is the main pull request for the drm subsystems for 6.10. In drivers the main thing is a new driver for ARM Mali firmware based GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and scattered changes to everything else. In the core a bunch of headers and Kconfig was refactored, along with the addition of a new panic handler which is meant to provide a user friendly message when a panic happens and graphical display is enabled. New drivers: - panthor: ARM Mali/Immortalis CSF-based GPU driver Core: - add a CONFIG_DRM_WERROR option - make more headers self-contained - grab resv lock in pin/unpin - fix vmap resv locking - EDID/eDP panel matching - Kconfig cleanups - DT sound bindings - Add SIZE_HINTS property for cursor planes - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - drop seq_file.h from a bunch of places - use drm_edid driver conversions dp: - DP Tunnel documentation - MST read sideband cap - Adaptive sync SDP prep work ttm: - improve placement for TTM BOs in idle/busy handling panic: - Fixes for drm-panic, and option to test it. - Add drm panic to simpledrm, mgag200, imx, ast bridge: - improve init ordering - adv7511: allow GPIO pin sharing - tc358775: add tc358675 support panel: - AUO B120XAN01.0 - Samsung s6e3fa7 - BOE NT116WHM-N44 - CMN N116BCA-EA1, - CrystalClear CMT430B19N00 - Startek KD050HDFIA020-C020A - powertip PH128800T006-ZHC01 - Innolux G121X1-L03 - LG sw43408 - Khadas TS050 V2 - EDO RM69380 OLED - CSOT MNB601LS1-1 amdgpu: - HDCP/ODM/RAS fixes - Devcoredump improvements - Expose VCN activity via sysfs - SMY 13.0.x updates - Enable fast updates on DCN 3.1.4 - Add dclk and vclk reporting on additional devices - Add ACA RAS infrastructure - Implement TLB flush fence - EEPROM handling fixes - SMUIO 14.0.2 support - SMU 14.0.1 Updates - SMU 14.0.2 support - Sync page table freeing with TLB flushes - DML2 refactor - DC debug improvements - DCN 3.5.x Updates - GPU reset fixes - HDP fix for second GFX pipe on GC 10.x - Enable secondary GFX pipe on GC 10.3 - Refactor and clean up BACO/BOCO/BAMACO handling - Remove invalid TTM resource start check - UAF fix in VA IOCTL - GPUVM page fault redirection to secondary IH rings for IH 6.x - Initial support for mapping kernel queues via MES - Fix VRAM memory accounting amdkfd: - MQD handling cleanup - Preemption handling fixes for XCDs - TLB flush fix for GC 9.4.2 - Properly clean up workqueue during module unload - Fix memory leak process create failure - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace - Fix eviction fence handling - Fix leak in GPU memory allocation failure case - DMABuf import handling fix - Enable SQ watchpoint for gfx10 i915: - Adding new DG2 PCI ID - add context hints for GT frequency - enable only one CCS for compute workloads - new workarounds - Fix UAF on destroy against retire race and remove two earlier partial fixes - Limit the reserved VM space to only the platforms that need it - Fix gt reset with GuC submission is disable - Add and use gt_to_guc() wrapper i915/xe display: - Lunar Lake display enabling, including cdclk and other refactors - BIOS/VBT/opregion related refactor - Digital port related refactor/clean-up - Fix 2s boot time regression on DP panel replay init - Remove duplication on audio enable/disable on SDVO and g4x+ DP - Disable AuxCCS framebuffers if built for Xe - Make crtc disable more atomic - Increase DP idle pattern wait timeout to 2ms - Start using container_of_const() for some extra const safety - Fix Jasper Lake boot freeze - Enable MST mode for 128b/132b single-stream sideband - Enable Adaptive Sync SDP Support for DP - Fix MTL supported DP rates - removal of UHBR13.5 - PLL refactoring - Limit eDP MSO pipe only for display version 20 - More display refactor towards independence from i915 dev_priv - Convert i915/xe fbdev to DRM client - More initial work to make display code more independent from i915 xe: - improved error capture - clean up some uAPI leftovers - devcoredump update - Add BMG mocs table - Handle GSCCS ER interrupt - Implement xe2- and GuC workarounds - struct xe_device cleanup - Hwmon updates - Add LRC parsing for more GPU instruction - Increase VM_BIND number of per-ioctl Ops - drm/xe: Add XE_BO_GGTT_INVALIDATE flag - Initial development for SR-IOV support - Add new PCI IDs to DG2 platform - Move userptr over to start using hmm_range_fault msm: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. - DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings - GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support radeon: - Silence UBSAN warnings related to flexible arrays nouveau: - move some uAPI objects to uapi headers omapdrm: - console fix ast: - add i2c polling qaic: - add debugfs entries exynos: - fix platform_driver .owner - drop cleanup code mediatek: - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe() - Add GAMMA 12-bit LUT support for MT8188 - Rename mtk_drm_* to mtk_* - Drop driver owner initialization - Correct calculation formula of PHY Timing" * tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits) drm/xe/ads: Use flexible-array drm/xe: Use ordered WQ for G2H handler drm/msm/gen_header: allow skipping the validation drm/msm/a6xx: Cleanup indexed regs const'ness drm/msm: Add devcoredump support for a750 drm/msm: Adjust a7xx GBIF debugbus dumping drm/msm: Update a6xx registers XML drm/msm: Fix imported a750 snapshot header for upstream drm/msm: Import a750 snapshot registers from kgsl MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails drm/msm/adreno: fix CP cycles stat retrieval on a7xx drm/msm/a7xx: allow writing to CP_BV counter selection registers drm: zynqmp_dpsub: Always register bridge Revert "drm/bridge: ti-sn65dsi83: Fix enable error path" drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer() drm/fbdev-generic: Do not set physical framebuffer address drm/panthor: Fix the FW reset logic drm/panthor: Make sure we handle 'unknown group state' case properly ... 
Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm subsystems for 6.10.

  In drivers the main thing is a new driver for ARM Mali firmware based
  GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
  scattered changes to everything else.

  In the core a bunch of headers and Kconfig was refactored, along with
  the addition of a new panic handler which is meant to provide a user
  friendly message when a panic happens and graphical display is
  enabled.

  New drivers:
   - panthor: ARM Mali/Immortalis CSF-based GPU driver

  Core:
   - add a CONFIG_DRM_WERROR option
   - make more headers self-contained
   - grab resv lock in pin/unpin
   - fix vmap resv locking
   - EDID/eDP panel matching
   - Kconfig cleanups
   - DT sound bindings
   - Add SIZE_HINTS property for cursor planes
   - Add struct drm_edid_product_id and helpers.
   - Use drm device based logging in more drm functions.
   - drop seq_file.h from a bunch of places
   - use drm_edid driver conversions

  dp:
   - DP Tunnel documentation
   - MST read sideband cap
   - Adaptive sync SDP prep work

  ttm:
   - improve placement for TTM BOs in idle/busy handling

  panic:
   - Fixes for drm-panic, and option to test it.
   - Add drm panic to simpledrm, mgag200, imx, ast

  bridge:
   - improve init ordering
   - adv7511: allow GPIO pin sharing
   - tc358775: add tc358675 support

  panel:
   - AUO B120XAN01.0
   - Samsung s6e3fa7
   - BOE NT116WHM-N44
   - CMN N116BCA-EA1,
   - CrystalClear CMT430B19N00
   - Startek KD050HDFIA020-C020A
   - powertip PH128800T006-ZHC01
   - Innolux G121X1-L03
   - LG sw43408
   - Khadas TS050 V2
   - EDO RM69380 OLED
   - CSOT MNB601LS1-1

  amdgpu:
   - HDCP/ODM/RAS fixes
   - Devcoredump improvements
   - Expose VCN activity via sysfs
   - SMY 13.0.x updates
   - Enable fast updates on DCN 3.1.4
   - Add dclk and vclk reporting on additional devices
   - Add ACA RAS infrastructure
   - Implement TLB flush fence
   - EEPROM handling fixes
   - SMUIO 14.0.2 support
   - SMU 14.0.1 Updates
   - SMU 14.0.2 support
   - Sync page table freeing with TLB flushes
   - DML2 refactor
   - DC debug improvements
   - DCN 3.5.x Updates
   - GPU reset fixes
   - HDP fix for second GFX pipe on GC 10.x
   - Enable secondary GFX pipe on GC 10.3
   - Refactor and clean up BACO/BOCO/BAMACO handling
   - Remove invalid TTM resource start check
   - UAF fix in VA IOCTL
   - GPUVM page fault redirection to secondary IH rings for IH 6.x
   - Initial support for mapping kernel queues via MES
   - Fix VRAM memory accounting

  amdkfd:
   - MQD handling cleanup
   - Preemption handling fixes for XCDs
   - TLB flush fix for GC 9.4.2
   - Properly clean up workqueue during module unload
   - Fix memory leak process create failure
   - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
   - Fix eviction fence handling
   - Fix leak in GPU memory allocation failure case
   - DMABuf import handling fix
   - Enable SQ watchpoint for gfx10

  i915:
   - Adding new DG2 PCI ID
   - add context hints for GT frequency
   - enable only one CCS for compute workloads
   - new workarounds
   - Fix UAF on destroy against retire race and remove two earlier partial fixes
   - Limit the reserved VM space to only the platforms that need it
   - Fix gt reset with GuC submission is disable
   - Add and use gt_to_guc() wrapper

  i915/xe display:
   - Lunar Lake display enabling, including cdclk and other refactors
   - BIOS/VBT/opregion related refactor
   - Digital port related refactor/clean-up
   - Fix 2s boot time regression on DP panel replay init
   - Remove duplication on audio enable/disable on SDVO and g4x+ DP
   - Disable AuxCCS framebuffers if built for Xe
   - Make crtc disable more atomic
   - Increase DP idle pattern wait timeout to 2ms
   - Start using container_of_const() for some extra const safety
   - Fix Jasper Lake boot freeze
   - Enable MST mode for 128b/132b single-stream sideband
   - Enable Adaptive Sync SDP Support for DP
   - Fix MTL supported DP rates - removal of UHBR13.5
   - PLL refactoring
   - Limit eDP MSO pipe only for display version 20
   - More display refactor towards independence from i915 dev_priv
   - Convert i915/xe fbdev to DRM client
   - More initial work to make display code more independent from i915

  xe:
   - improved error capture
   - clean up some uAPI leftovers
   - devcoredump update
   - Add BMG mocs table
   - Handle GSCCS ER interrupt
   - Implement xe2- and GuC workarounds
   - struct xe_device cleanup
   - Hwmon updates
   - Add LRC parsing for more GPU instruction
   - Increase VM_BIND number of per-ioctl Ops
   - drm/xe: Add XE_BO_GGTT_INVALIDATE flag
   - Initial development for SR-IOV support
   - Add new PCI IDs to DG2 platform
   - Move userptr over to start using hmm_range_fault

  msm:
   - Switched to generating register header files during build process
     instead of shipping pre-generated headers
   - Merged DPU and MDP4 format databases.
   - DP:
     - Stop using compat string to distinguish DP and eDP cases
     - Added support for X Elite platform (X1E80100)
     - Reworked DP aux/audio support
     - Added SM6350 DP to the bindings
   - GPU:
     - a7xx perfcntr reg fixes
     - MAINTAINERS updates
     - a750 devcoredump support

  radeon:
   - Silence UBSAN warnings related to flexible arrays

  nouveau:
   - move some uAPI objects to uapi headers

  omapdrm:
   - console fix

  ast:
   - add i2c polling

  qaic:
   - add debugfs entries

  exynos:
   - fix platform_driver .owner
   - drop cleanup code

  mediatek:
   - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
   - Add GAMMA 12-bit LUT support for MT8188
   - Rename mtk_drm_* to mtk_*
   - Drop driver owner initialization
   - Correct calculation formula of PHY Timing"

* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
  drm/xe/ads: Use flexible-array
  drm/xe: Use ordered WQ for G2H handler
  drm/msm/gen_header: allow skipping the validation
  drm/msm/a6xx: Cleanup indexed regs const'ness
  drm/msm: Add devcoredump support for a750
  drm/msm: Adjust a7xx GBIF debugbus dumping
  drm/msm: Update a6xx registers XML
  drm/msm: Fix imported a750 snapshot header for upstream
  drm/msm: Import a750 snapshot registers from kgsl
  MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
  MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
  drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
  drm/msm/adreno: fix CP cycles stat retrieval on a7xx
  drm/msm/a7xx: allow writing to CP_BV counter selection registers
  drm: zynqmp_dpsub: Always register bridge
  Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
  drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
  drm/fbdev-generic: Do not set physical framebuffer address
  drm/panthor: Fix the FW reset logic
  drm/panthor: Make sure we handle 'unknown group state' case properly
  ...
Revert "drm: Switch DRM_DISPLAY_HELPER to depends on" 2024-05-02T15:58:23+00:00 Geert Uytterhoeven geert+renesas@glider.be 2024-04-22T10:30:37+00:00 05b8b6dd225d541b16145a0578ed93d91e43f0c1 This reverts commit e075e496f516bf92bc0cbaf94d64e8d4a6b58321, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be Signed-off-by: Maxime Ripard <mripard@kernel.org> 
This reverts commit e075e496f516bf92bc0cbaf94d64e8d4a6b58321, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in.  Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Revert "drm: Switch DRM_DISPLAY_DP_AUX_BUS to depends on" 2024-05-02T15:58:22+00:00 Geert Uytterhoeven geert+renesas@glider.be 2024-04-22T10:30:36+00:00 1e0b9b4466081e24a34092024bb2b485ebae630a This reverts commit 4d15125d7fe637f401e64e33c99513adf6586fdd, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/79824fec01eb9ab0673b9409f9b39cc8b5cc338d.1713780345.git.geert+renesas@glider.be Signed-off-by: Maxime Ripard <mripard@kernel.org> 
This reverts commit 4d15125d7fe637f401e64e33c99513adf6586fdd, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in.  Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/79824fec01eb9ab0673b9409f9b39cc8b5cc338d.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>