The "data-mapping" property may not be the best way to describe the
interface between panels and display interfaces.
Drop use of in the panel-simple driver, so we have time to find
the right way to describe this interface.

Fixes: 4a1d0dbc8332 ("drm/panel: simple: add panel-dpi support")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314153047.2486-3-sam@ravnborg.org

The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.

Someone tell me which (if either) of the dotclock or vreresh is
correct?

Cc: Adam Ford <aford173@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-22-ville.syrjala@linux.intel.com
Reviewed-by: Adam Ford <aford173@gmail.com>

The currently listed dotclocks disagree with the currently
listed vrefresh rates. Change the dotclocks to match the vrefresh.

Someone tell me which (if either) of the dotclock or vreresh is
correct?

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-9-ville.syrjala@linux.intel.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.

Someone tell me which (if either) of the dotclock or vreresh is
correct?

Cc: Heiko Schocher <hs@denx.de>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-7-ville.syrjala@linux.intel.com
Reviewed-by: Heiko Schocher <hs@denx.de>

The listed dotclocks are two orders of mangnitude out.
Fix them.

v2: Just divide everything by 100 (Linus)

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309133809.32585-1-ville.syrjala@linux.intel.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

The dotclock is three orders of magnitude out. Fix it.

v2: Just set it to 20MHz (Linus)

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309133644.32385-1-ville.syrjala@linux.intel.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.

There are two variants of the COM37H3M panel.
The older one's COM37H3M05DTC data sheet specifies:

                         MIN      TYP     MAX
CLK frequency    fCLK     --       22.4    26.3 MHz (in VGA mode)
VSYNC Frequency  fVSYNC   54       60      66   Hz
VSYNC cycle time tv       --      650      --   H
HSYNC frequency  fHSYNC   --       39.3    --   kHz
HSYNC cycle time th       --      570      --   CLK

The newer one's COM37H3M99DTC data sheet says:

                         MIN      TYP     MAX
CLK frequency    fCLK     18       19.8    27   MHz
VSYNC Frequency  fVSYNC   54       60      66   Hz
VSYNC cycle time tv      646      650     700   H
HSYNC frequency  fHSYNC  --        39.0    50.0 kHz
HSYNC cycle time th      504      508     630   CLK

So we choose a parameter set that lies within the specs
of both variants. We start at .vrefresh = 60,
choose .htotal = 570 and .vtotal = 650 and end up
in a clock of 22.230 MHz.

Reported-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/e63a0533ad5b5142373437ef758aedbdb716152d.1583826198.git.hns@goldelico.com

The OrtusTech COM43H4M85ULC is a DPI panel, set the connector type
accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309184210.10042-1-laurent.pinchart@ideasonboard.com

This reverts commit 0f9cdd743f7f8d470fff51b11250f02fc554cf1b.

The interface of the panel is LVDS, not parallel.
The color depth is RGB888, not RGB565.
The panel has additional features, making it not so simple.
The only user (upstream) of this panel is appropriately using panel-lvds.

Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305130536.26011-1-peda@axentia.se

Panel driver for the KD35T133 display from Elida, used for example
in the rk3326-based Odroid Go Advance handheld.

changes in v3:
- add missing return value assignment (Francesco)
- re-sort header includes (Sam)
changes in v2:
- rename dsi_generic_write_seq macro to dsi_dcs_write_seq to honor
  the underlying mipi_dsi_dcs_write (Robin)

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200229151506.750242-3-heiko@sntech.de