linux-stable.git/drivers/gpu/drm/panel, branch linux-6.14.y Linux kernel stable tree drm/panel-edp: Add Starry 116KHD024006 2025-05-29T09:13:47+00:00 Douglas Anderson dianders@chromium.org 2025-01-09T22:28:53+00:00 96553eb6c39135b4f2c3c8e2cb441f543921d01f [ Upstream commit 749b5b279e5636cdcef51e15d67b77162cca6caa ] We have a few reports of sc7180-trogdor-pompom devices that have a panel in them that IDs as STA 0x0004 and has the following raw EDID: 00 ff ff ff ff ff ff 00 4e 81 04 00 00 00 00 00 10 20 01 04 a5 1a 0e 78 0a dc dd 96 5b 5b 91 28 1f 52 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 8e 1c 56 a0 50 00 1e 30 28 20 55 00 00 90 10 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 31 31 36 4b 48 44 30 32 34 30 30 36 0a 00 e6 We've been unable to locate a datasheet for this panel and our partner has not been responsive, but all Starry eDP datasheets that we can find agree on the same timing (delay_100_500_e200) so it should be safe to use that here instead of the super conservative timings. We'll still go a little extra conservative and allow `hpd_absent` of 200 instead of 100 because that won't add any real-world delay in most cases. We'll associate the string from the EDID ("116KHD024006") with this panel. Given that the ID is the suspicious value of 0x0004 it seems likely that Starry doesn't always update their IDs but the string will still work to differentiate if we ever need to in the future. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250109142853.1.Ibcc3009933fd19507cc9c713ad0c99c7a9e4fe17@changeid Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 749b5b279e5636cdcef51e15d67b77162cca6caa ]

We have a few reports of sc7180-trogdor-pompom devices that have a
panel in them that IDs as STA 0x0004 and has the following raw EDID:

  00 ff ff ff ff ff ff 00  4e 81 04 00 00 00 00 00
  10 20 01 04 a5 1a 0e 78  0a dc dd 96 5b 5b 91 28
  1f 52 54 00 00 00 01 01  01 01 01 01 01 01 01 01
  01 01 01 01 01 01 8e 1c  56 a0 50 00 1e 30 28 20
  55 00 00 90 10 00 00 18  00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 fe
  00 31 31 36 4b 48 44 30  32 34 30 30 36 0a 00 e6

We've been unable to locate a datasheet for this panel and our partner
has not been responsive, but all Starry eDP datasheets that we can
find agree on the same timing (delay_100_500_e200) so it should be
safe to use that here instead of the super conservative timings. We'll
still go a little extra conservative and allow `hpd_absent` of 200
instead of 100 because that won't add any real-world delay in most
cases.

We'll associate the string from the EDID ("116KHD024006") with this
panel. Given that the ID is the suspicious value of 0x0004 it seems
likely that Starry doesn't always update their IDs but the string will
still work to differentiate if we ever need to in the future.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109142853.1.Ibcc3009933fd19507cc9c713ad0c99c7a9e4fe17@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/panel: simple: Update timings for AUO G101EVN010 2025-05-18T06:26:07+00:00 Kevin Baker kevinb@ventureresearch.com 2025-05-05T17:02:56+00:00 10cece01d2bda4e9baa86fc3f3b952f793a74144 [ Upstream commit 7c6fa1797a725732981f2d77711c867166737719 ] Switch to panel timings based on datasheet for the AUO G101EVN01.0 LVDS panel. Default timings were tested on the panel. Previous mode-based timings resulted in horizontal display shift. Signed-off-by: Kevin Baker <kevinb@ventureresearch.com> Fixes: 4fb86404a977 ("drm/panel: simple: Add AUO G101EVN010 panel support") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7c6fa1797a725732981f2d77711c867166737719 ]

Switch to panel timings based on datasheet for the AUO G101EVN01.0
LVDS panel. Default timings were tested on the panel.

Previous mode-based timings resulted in horizontal display shift.

Signed-off-by: Kevin Baker <kevinb@ventureresearch.com>
Fixes: 4fb86404a977 ("drm/panel: simple: Add AUO G101EVN010 panel support")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm: panel: jd9365da: fix reset signal polarity in unprepare 2025-05-02T06:01:47+00:00 Hugo Villeneuve hvilleneuve@dimonoff.com 2025-04-17T19:55:06+00:00 f12ce10b05b6dcabddee1a9cf113bb538cbc303b commit 095c8e61f4c71cd4630ee11a82e82cc341b38464 upstream. commit a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity") fixed reset signal polarity in jadard_dsi_probe() and jadard_prepare(). It was not done in jadard_unprepare() because of an incorrect assumption about reset line handling in power off mode. After looking into the datasheet, it now appears that before disabling regulators, the reset line is deasserted first, and if reset_before_power_off_vcioo is true, then the reset line is asserted. Fix reset polarity by inverting gpiod_set_value() second argument in in jadard_unprepare(). Fixes: 6b818c533dd8 ("drm: panel: Add Jadard JD9365DA-H3 DSI panel") Fixes: 2b976ad760dc ("drm/panel: jd9365da: Support for kd101ne3-40ti MIPI-DSI panel") Fixes: a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 095c8e61f4c71cd4630ee11a82e82cc341b38464 upstream.

commit a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity")
fixed reset signal polarity in jadard_dsi_probe() and jadard_prepare().

It was not done in jadard_unprepare() because of an incorrect assumption
about reset line handling in power off mode. After looking into the
datasheet, it now appears that before disabling regulators, the reset line
is deasserted first, and if reset_before_power_off_vcioo is true, then the
reset line is asserted.

Fix reset polarity by inverting gpiod_set_value() second argument in
in jadard_unprepare().

Fixes: 6b818c533dd8 ("drm: panel: Add Jadard JD9365DA-H3 DSI panel")
Fixes: 2b976ad760dc ("drm/panel: jd9365da: Support for kd101ne3-40ti MIPI-DSI panel")
Fixes: a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/panel: ilitek-ili9882t: fix GPIO name in error message 2025-04-10T12:44:16+00:00 John Keeping jkeeping@inmusicbrands.com 2025-02-17T12:04:28+00:00 ab882ad4c9ab390a152cb221ae2240aa54d6a195 [ Upstream commit 4ce2c7e201c265df1c62a9190a98a98803208b8f ] This driver uses the enable-gpios property and it is confusing that the error message refers to reset-gpios. Use the correct name when the enable GPIO is not found. Fixes: e2450d32e5fb5 ("drm/panel: ili9882t: Break out as separate driver") Signed-off-by: John Keeping <jkeeping@inmusicbrands.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250217120428.3779197-1-jkeeping@inmusicbrands.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4ce2c7e201c265df1c62a9190a98a98803208b8f ]

This driver uses the enable-gpios property and it is confusing that the
error message refers to reset-gpios.  Use the correct name when the
enable GPIO is not found.

Fixes: e2450d32e5fb5 ("drm/panel: ili9882t: Break out as separate driver")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217120428.3779197-1-jkeeping@inmusicbrands.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm: panel: jd9365da-h3: fix reset signal polarity 2025-02-13T16:46:51+00:00 Hugo Villeneuve hvilleneuve@dimonoff.com 2024-09-27T13:53:05+00:00 a8972d5a49b408248294b5ecbdd0a085e4726349 In jadard_prepare() a reset pulse is generated with the following statements (delays ommited for clarity): gpiod_set_value(jadard->reset, 1); --> Deassert reset gpiod_set_value(jadard->reset, 0); --> Assert reset for 10ms gpiod_set_value(jadard->reset, 1); --> Deassert reset However, specifying second argument of "0" to gpiod_set_value() means to deassert the GPIO, and "1" means to assert it. If the reset signal is defined as GPIO_ACTIVE_LOW in the DTS, the above statements will incorrectly generate the reset pulse (inverted) and leave it asserted (LOW) at the end of jadard_prepare(). Fix reset behavior by inverting gpiod_set_value() second argument in jadard_prepare(). Also modify second argument to devm_gpiod_get() in jadard_dsi_probe() to assert the reset when probing. Do not modify it in jadard_unprepare() as it is already properly asserted with "1", which seems to be the intended behavior. Fixes: 6b818c533dd8 ("drm: panel: Add Jadard JD9365DA-H3 DSI panel") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240927135306.857617-1-hugo@hugovil.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240927135306.857617-1-hugo@hugovil.com 
In jadard_prepare() a reset pulse is generated with the following
statements (delays ommited for clarity):

    gpiod_set_value(jadard->reset, 1); --> Deassert reset
    gpiod_set_value(jadard->reset, 0); --> Assert reset for 10ms
    gpiod_set_value(jadard->reset, 1); --> Deassert reset

However, specifying second argument of "0" to gpiod_set_value() means to
deassert the GPIO, and "1" means to assert it. If the reset signal is
defined as GPIO_ACTIVE_LOW in the DTS, the above statements will
incorrectly generate the reset pulse (inverted) and leave it asserted
(LOW) at the end of jadard_prepare().

Fix reset behavior by inverting gpiod_set_value() second argument
in jadard_prepare(). Also modify second argument to devm_gpiod_get()
in jadard_dsi_probe() to assert the reset when probing.

Do not modify it in jadard_unprepare() as it is already properly
asserted with "1", which seems to be the intended behavior.

Fixes: 6b818c533dd8 ("drm: panel: Add Jadard JD9365DA-H3 DSI panel")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240927135306.857617-1-hugo@hugovil.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927135306.857617-1-hugo@hugovil.com
Merge tag 'v6.13-rc6' into drm-next 2025-01-10T04:24:17+00:00 Dave Airlie airlied@redhat.com 2025-01-10T04:24:17+00:00 f6001870edeabf0f7bc0460303d0cdbb9f0b3bc4 This backmerges Linux 6.13-rc6 this is need for the newer pulls. Signed-off-by: Dave Airlie <airlied@redhat.com> 
This backmerges Linux 6.13-rc6 this is need for the newer pulls.

Signed-off-by: Dave Airlie <airlied@redhat.com>
drm: panel-simple: support TOPLAND TIAN G07017 LCD panel 2024-12-20T11:06:40+00:00 Ahmad Fatoum a.fatoum@pengutronix.de 2024-12-18T19:45:00+00:00 652be03b54e042d229fde7d086655c24b7146924 The TIAN-G07017-01 is a 7" TFT-LCD module by TOPLAND ELECTRONICS (H.K). The panel features 1024x600 24-bit RGB pixels driven over LVDS as well as a PWM backlight and I2C-connected ft5506-compatible capacitive touch. The panel description is taken from the Datasheet V0 (2024.5.23), but it lists no timings and these were provided by the vendor separately. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241218-topland-tian-g07017-v1-3-d5e411c199e3@pengutronix.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241218-topland-tian-g07017-v1-3-d5e411c199e3@pengutronix.de 
The TIAN-G07017-01 is a 7" TFT-LCD module by TOPLAND ELECTRONICS (H.K).
The panel features 1024x600 24-bit RGB pixels driven over LVDS as well
as a PWM backlight and I2C-connected ft5506-compatible capacitive touch.

The panel description is taken from the Datasheet V0 (2024.5.23), but
it lists no timings and these were provided by the vendor separately.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241218-topland-tian-g07017-v1-3-d5e411c199e3@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218-topland-tian-g07017-v1-3-d5e411c199e3@pengutronix.de
Merge tag 'drm-misc-fixes-2024-12-19' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes 2024-12-19T21:13:45+00:00 Dave Airlie airlied@redhat.com 2024-12-19T21:13:44+00:00 87fd88332567e22986d4989d912a1e44f164dc7d drm-misc-fixes for v6.13-rc4: - udma-buf fixes related to sealing. - dma-buf build warning fix when debugfs is not enabled. - Assorted drm/panel fixes. - Correct error return in drm_dp_tunnel_mgr_create. - Fix even more divide by zero in drm_mode_vrefresh. - Fix FBDEV dependencies in Kconfig. - Documentation fix for drm_sched_fini. - IVPU NULL pointer, memory leak and WARN fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d0763051-87b7-483e-89e0-a9f993383450@linux.intel.com 
drm-misc-fixes for v6.13-rc4:
- udma-buf fixes related to sealing.
- dma-buf build warning fix when debugfs is not enabled.
- Assorted drm/panel fixes.
- Correct error return in drm_dp_tunnel_mgr_create.
- Fix even more divide by zero in drm_mode_vrefresh.
- Fix FBDEV dependencies in Kconfig.
- Documentation fix for drm_sched_fini.
- IVPU NULL pointer, memory leak and WARN fix.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0763051-87b7-483e-89e0-a9f993383450@linux.intel.com
drm/panel: simple: add Multi-Inno Technology MI1010Z1T-1CP11 2024-12-18T10:15:10+00:00 Marek Vasut marex@denx.de 2024-12-12T12:26:29+00:00 958473e7ed69bb397eed816b88be28986f7951ad Add Multi-Inno Technology MI1010Z1T-1CP11 10.1" 1024x600 LVDS panel support. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241212122701.25305-2-marex@denx.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241212122701.25305-2-marex@denx.de 
Add Multi-Inno Technology MI1010Z1T-1CP11 10.1" 1024x600 LVDS panel support.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241212122701.25305-2-marex@denx.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212122701.25305-2-marex@denx.de
drm/panel: simple: Add Tianma TM070JDHG34-00 panel support 2024-12-18T10:14:55+00:00 Luca Ceresoli luca.ceresoli@bootlin.com 2024-12-16T16:21:35+00:00 bf6daaa281f7d11fcd91a68935142916afc51c53 Add Tianma TM070JDHG34-00 7.0" 1280x800 LVDS RGB TFT LCD panel. Panel info and datasheet: https://fortec.us/products/tm070jdhg34-00/ Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/r/20241216-tianma_tm070jdhg34-v2-2-0b319a0bac39@bootlin.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241216-tianma_tm070jdhg34-v2-2-0b319a0bac39@bootlin.com 
Add Tianma TM070JDHG34-00 7.0" 1280x800 LVDS RGB TFT LCD panel.

Panel info and datasheet: https://fortec.us/products/tm070jdhg34-00/

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20241216-tianma_tm070jdhg34-v2-2-0b319a0bac39@bootlin.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216-tianma_tm070jdhg34-v2-2-0b319a0bac39@bootlin.com