linux-stable.git/drivers/gpu/drm/panel, branch linux-5.4.y

drm/panel: ilitek-ili9881c: Fix warning with GPIO controllers that sleep

2024-07-05T07:08:27+00:00

[ Upstream commit ee7860cd8b5763017f8dc785c2851fecb7a0c565 ]

The ilitek-ili9881c controls the reset GPIO using the non-sleeping
gpiod_set_value() function. This complains loudly when the GPIO
controller needs to sleep. As the caller can sleep, use
gpiod_set_value_cansleep() to fix the issue.

Signed-off-by: Laurent Pinchart 
Reviewed-by: Neil Armstrong 
Link: https://lore.kernel.org/r/20240317154839.21260-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Neil Armstrong 
Link: https://patchwork.freedesktop.org/patch/msgid/20240317154839.21260-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Sasha Levin

drm/panel: simple: Add missing Innolux G121X1-L03 format, flags, connector

2024-06-16T11:28:39+00:00

[ Upstream commit 11ac72d033b9f577e8ba0c7a41d1c312bb232593 ]

The .bpc = 6 implies .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ,
add the missing bus_format. Add missing connector type and bus_flags
as well.

Documentation [1] 1.4 GENERAL SPECIFICATI0NS indicates this panel is
capable of both RGB 18bit/24bit panel, the current configuration uses
18bit mode, .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , .bpc = 6.

Support for the 24bit mode would require another entry in panel-simple
with .bus_format = MEDIA_BUS_FMT_RGB666_1X7X4_SPWG and .bpc = 8, which
is out of scope of this fix.

[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf

Fixes: f8fa17ba812b ("drm/panel: simple: Add support for Innolux G121X1-L03")
Signed-off-by: Marek Vasut 
Acked-by: Jessica Zhang 
Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-2-marex@denx.de
Signed-off-by: Sasha Levin

drm/panel: simple: Fix Innolux G101ICE-L01 timings

2023-12-08T07:44:23+00:00

[ Upstream commit 3f9a91b6c00e655d27bd785dcda1742dbdc31bda ]

The Innolux G101ICE-L01 datasheet [1] page 17 table
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
indicates that maximum vertical blanking time is 40 lines.
Currently the driver uses 29 lines.

Fix it, and since this panel is a DE panel, adjust the timings
to make them less hostile to controllers which cannot do 1 px
HSA/VSA, distribute the delays evenly between all three parts.

[1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf

Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel")
Signed-off-by: Marek Vasut 
Reviewed-by: Neil Armstrong 
Link: https://patchwork.freedesktop.org/patch/msgid/20231008223256.279196-1-marex@denx.de
Signed-off-by: Sasha Levin

drm/panel: simple: Fix Innolux G101ICE-L01 bus flags

2023-12-08T07:44:22+00:00

[ Upstream commit 06fc41b09cfbc02977acd9189473593a37d82d9b ]

Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description,
ones which match both the datasheet and the panel display_timing flags .

Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel")
Signed-off-by: Marek Vasut 
Reviewed-by: Neil Armstrong 
Link: https://patchwork.freedesktop.org/patch/msgid/20231008223315.279215-1-marex@denx.de
Signed-off-by: Sasha Levin

drm/panel: simple: Add missing connector type and pixel format for AUO T215HVN01

2023-09-23T08:59:46+00:00

[ Upstream commit 7a675a8fa598edb29a664a91adb80f0340649f6f ]

The connector type and pixel format are missing for this panel,
add them to prevent various drivers from failing to determine
either of those parameters.

Fixes: 7ee933a1d5c4 ("drm/panel: simple: Add support for AUO T215HVN01")
Signed-off-by: Marek Vasut 
Reviewed-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20230709134914.449328-1-marex@denx.de
Signed-off-by: Sasha Levin

drm/panel: simple: Add connector_type for innolux_at043tn24

2023-07-27T06:37:29+00:00

[ Upstream commit 2c56a751845ddfd3078ebe79981aaaa182629163 ]

The innolux at043tn24 display is a parallel LCD. Pass the 'connector_type'
information to avoid the following warning:

panel-simple panel: Specify missing connector_type

Signed-off-by: Fabio Estevam 
Fixes: 41bcceb4de9c ("drm/panel: simple: Add support for Innolux AT043TN24")
Reviewed-by: Sam Ravnborg 
Signed-off-by: Neil Armstrong 
Link: https://patchwork.freedesktop.org/patch/msgid/20230620112202.654981-1-festevam@gmail.com
Signed-off-by: Sasha Levin

drm/panel: Add and fill drm_panel type field

2023-07-27T06:37:29+00:00

[ Upstream commit 9a2654c0f62a1704f36acb6329f9ccbd539f75ad ]

Add a type field to the drm_panel structure to report the panel type,
using DRM_MODE_CONNECTOR_* macros (the values that make sense are LVDS,
eDP, DSI and DPI). This will be used to initialise the corresponding
connector type.

Update all panel drivers accordingly. The panel-simple driver only
specifies the type for the known to be LVDS panels, while all other
panels are left as unknown and will be converted on a case-by-case
basis as they all need to be carefully reviewed.

Signed-off-by: Laurent Pinchart 
Reviewed-by: Boris Brezillon 
Reviewed-by: Linus Walleij 
Signed-off-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-2-laurent.pinchart@ideasonboard.com
Stable-dep-of: 2c56a751845d ("drm/panel: simple: Add connector_type for innolux_at043tn24")
Signed-off-by: Sasha Levin

drm/panel: Initialise panel dev and funcs through drm_panel_init()

2023-07-27T06:37:29+00:00

[ Upstream commit 6dbe0c4b0fc0646442b2b1580d022404e582fd7b ]

Instead of requiring all drivers to set the dev and funcs fields of
drm_panel manually after calling drm_panel_init(), pass the data as
arguments to the function. This simplifies the panel drivers, and will
help future refactoring when adding new arguments to drm_panel_init().

The panel drivers have been updated with the following Coccinelle
semantic patch, with manual inspection to verify that no call to
drm_panel_init() with a single argument still exists.

@@
expression panel;
expression device;
identifier ops;
@@
 drm_panel_init(&panel
+	, device, &ops
 );
 ...
(
-panel.dev = device;
-panel.funcs = &ops;
|
-panel.funcs = &ops;
-panel.dev = device;
)

Suggested-by: Sam Ravnborg 
Signed-off-by: Laurent Pinchart 
Signed-off-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-3-laurent.pinchart@ideasonboard.com
Stable-dep-of: 2c56a751845d ("drm/panel: simple: Add connector_type for innolux_at043tn24")
Signed-off-by: Sasha Levin

drm/panel: simple: fix active size for Ampire AM-480272H3TMQW-T01H

2023-07-27T06:37:13+00:00

[ Upstream commit f24b49550814fdee4a98b9552e35e243ccafd4a8 ]

The previous setting was related to the overall dimension and not to the
active display area.
In the "PHYSICAL SPECIFICATIONS" section, the datasheet shows the
following parameters:

 ----------------------------------------------------------
|       Item        |         Specifications        | unit |
 ----------------------------------------------------------
| Display area      | 98.7 (W) x 57.5 (H)           |  mm  |
 ----------------------------------------------------------
| Overall dimension | 105.5(W) x 67.2(H) x 4.96(D)  |  mm  |
 ----------------------------------------------------------

Fixes: 966fea78adf2 ("drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H")
Signed-off-by: Dario Binacchi 
Reviewed-by: Neil Armstrong 
[narmstrong: fixed Fixes commit id length]
Signed-off-by: Neil Armstrong 
Link: https://patchwork.freedesktop.org/patch/msgid/20230516085039.3797303-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin

drm/panel: otm8009a: Set backlight parent to panel device

2023-05-17T09:36:02+00:00

commit ab4f869fba6119997f7630d600049762a2b014fa upstream.

This is the logical place to put the backlight device, and it also
fixes a kernel crash if the MIPI host is removed. Previously the
backlight device would be unregistered twice when this happened - once
as a child of the MIPI host through `mipi_dsi_host_unregister`, and
once when the panel device is destroyed.

Fixes: 12a6cbd4f3f1 ("drm/panel: otm8009a: Use new backlight API")
Signed-off-by: James Cowgill 
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong 
Signed-off-by: Neil Armstrong 
Link: https://patchwork.freedesktop.org/patch/msgid/20230412173450.199592-1-james.cowgill@blaize.com
Signed-off-by: Greg Kroah-Hartman