linux-stable.git/drivers/gpu/drm/omapdrm, branch v3.12

Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

2013-09-05T17:17:26+00:00

Pull drm tree changes from Dave Airlie:
 "This is the main drm pull request, I have some overlap with sound and
  arm-soc, the sound patch is acked and may conflict based on -next
  reports but should be a trivial fixup, which I'll leave to you!

  Highlights:

   - new drivers:

     MSM driver from Rob Clark

   - non-drm:

     switcheroo and hdmi audio driver support for secondary GPU
     poweroff, so drivers can use runtime PM to poweroff the GPUs.  This
     can save 5 or 6W on some optimus laptops.

   - drm core:

     combined GEM and TTM VMA manager
     per-filp mmap permission tracking
     initial rendernode support (via a runtime enable for now, until we get api stable),
     remove old proc support,
     lots of cleanups of legacy code
     hdmi vendor infoframes and 4k modes
     lots of gem/prime locking and races fixes
     async pageflip scaffolding
     drm bridge objects

   - i915:

     Haswell PC8+ support and eLLC support, HDMI 4K support, initial
     per-process VMA pieces, watermark reworks, convert to generic hdmi
     infoframes, encoder reworking, fastboot support,

   - radeon:

     CIK PM support, remove 3d blit code in favour of DMA engines,
     Berlin GPU support, HDMI audio fixes

   - nouveau:

     secondary GPU power down support for optimus laptops, lots of
     fixes, use MSI, VP3 engine support

   - exynos:

     runtime pm support for g2d, DT support, remove non-DT,

   - tda998x i2c driver:

     lots of fixes for sync issues

   - gma500:

     lots of cleanups

   - rcar:

     add LVDS support, fbdev emulation,

   - tegra:

     just minor fixes"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (684 commits)
  drm/exynos: Fix build error with exynos_drm_connector.c
  drm/exynos: Remove non-DT support in exynos_drm_fimd
  drm/exynos: Remove non-DT support in exynos_hdmi
  drm/exynos: Remove non-DT support in exynos_drm_g2d
  drm/exynos: Remove non-DT support in exynos_hdmiphy
  drm/exynos: Remove non-DT support in exynos_ddc
  drm/exynos: Make Exynos DRM drivers depend on OF
  drm/exynos: Consider fallback option to allocation fail
  drm/exynos: fimd: move platform data parsing to separate function
  drm/exynos: fimd: get signal polarities from device tree
  drm/exynos: fimd: replace struct fb_videomode with videomode
  drm/exynos: check a pixel format to a particular window layer
  drm/exynos: fix fimd pixel format setting
  drm/exynos: Add NULL pointer check
  drm/exynos: Remove redundant error messages
  drm/exynos: Add missing of.h header include
  drm/exynos: Remove redundant NULL check in exynos_drm_buf
  drm/exynos: add device tree support for rotator
  drm/exynos: Add missing includes
  drm/exynos: add runtime pm interfaces to g2d driver
  ...

OMAPDSS: rename omap_dss_device's 'output' to 'src'

2013-08-30T05:51:10+00:00

In the old panel device model we had "outputs", which were the encoders
inside OMAP DSS block, and panel devices (omap_dss_device). The panel
devices had a reference to the source of the video data, i.e. reference
to an "output", in a field named "output".

That was somewhat confusing even in the old panel device model, but even
more so with the panel device model where we can have longer chains of
display entities.

This patch renames the "output" field to "src", which much better tells
what the field points to.

Signed-off-by: Tomi Valkeinen 
Reviewed-by: Archit Taneja

drm: Pass page flip ioctl flags to driver

2013-08-29T23:24:54+00:00

This lets drivers see the flags requested by the application

[airlied: fixup for rcar/imx/msm]

Signed-off-by: Keith Packard 
Signed-off-by: Dave Airlie

drm/omap: tiler: clear buffer properly

2013-08-29T23:14:41+00:00

We're taking the sizeof() the wrong thing so it doesn't clear the whole
buffer.

Signed-off-by: Dan Carpenter 
Acked-by: Rob Clark 
Signed-off-by: Dave Airlie

drm/omap: kill omap_gem_helpers.c

2013-08-19T00:36:16+00:00

Signed-off-by: Rob Clark 
Signed-off-by: Dave Airlie

drm/omap: use flip-work helper

2013-08-19T00:33:39+00:00

And simplify how we hold a ref+pin to what is being scanned out by using
fb refcnt'ing.  The previous logic pre-dated fb refcnt, and as a result
was less straightforward than it could have been.  By holding a ref to
the fb, we don't have to care about how many plane's there are and
holding a ref to each color plane's bo.

Signed-off-by: Rob Clark 
Signed-off-by: Dave Airlie

drm: remove FASYNC support

2013-08-19T00:05:17+00:00

So I've stumbled over drm_fasync and wondered what it does. Digging
that up is quite a story.

First I've had to read up on what this does and ended up being rather
bewildered why peopled loved signals so much back in the days that
they've created SIGIO just for that ...

Then I wondered how this ever works, and what that strange "No-op."
comment right above it should mean. After all calling the core fasync
helper is pretty obviously not a noop. After reading through the
kernels FASYNC implementation I've noticed that signals are only sent
out to the processes attached with FASYNC by calling kill_fasync.

No merged drm driver has ever done that.

After more digging I've found out that the only driver that ever used
this is the so called GAMMA driver. I've frankly never heard of such a
gpu brand ever before. Now FASYNC seems to not have been the only bad
thing with that driver, since Dave Airlie removed it from the drm
driver with prejudice:

commit 1430163b4bbf7b00367ea1066c1c5fe85dbeefed
Author: Dave Airlie 
Date:   Sun Aug 29 12:04:35 2004 +0000

    Drop GAMMA DRM from a great height ...

Long story short, the drm fasync support seems to be doing absolutely
nothing. And the only user of it was never merged into the upstream
kernel. And we don't need any fops->fasync callback since the fcntl
implementation in the kernel already implements the noop case
correctly.

So stop this particular cargo-cult and rip it all out.

v2: Kill drm_fasync assignments in rcar (newly added) and imx drivers
(somehow I've missed that one in staging). Also drop the reference in
the drm DocBook. ARM compile-fail reported by Rob Clark.

v3: Move the removal of dev->buf_asnyc assignment in drm_setup to this
patch here.

v4: Actually git add ... tsk.

Cc: Dave Airlie 
Cc: Laurent Pinchart 
Cc: Rob Clark 
Acked-by: Laurent Pinchart 
Signed-off-by: Daniel Vetter 
Reviewed-by: David Herrmann 
Signed-off-by: Dave Airlie

drm/omap: kill firstopen callback

2013-08-18T23:40:01+00:00

KMS drivers really shouldn't need to do anything on firstopen, so kill
empty callbacks.

Signed-off-by: Daniel Vetter 
Acked-by: Rob Clark 
Signed-off-by: Dave Airlie

drm: const'ify ioctls table (v2)

2013-08-07T00:10:02+00:00

Because, there is no reason for it not to be const.

v1: original
v2: fix compile break in vmwgfx, and couple related cleanups suggested
    by Ville Syrjälä

Signed-off-by: Rob Clark 
Reviewed-by: Ville Syrjälä 
Reviewed-by: Alex Deucher 
Signed-off-by: Dave Airlie

drm/gem: create drm_gem_dumb_destroy

2013-08-06T23:59:24+00:00

All the gem based kms drivers really want the same function to
destroy a dumb framebuffer backing storage object.

So give it to them and roll it out in all drivers.

This still leaves the option open for kms drivers which don't use GEM
for backing storage, but it does decently simplify matters for gem
drivers.

Acked-by: Inki Dae 
Acked-by: Laurent Pinchart 
Cc: Intel Graphics Development 
Cc: Ben Skeggs 
Reviwed-by: Rob Clark 
Cc: Alex Deucher 
Acked-by: Patrik Jakobsson 
Signed-off-by: Daniel Vetter 
Signed-off-by: Dave Airlie