linux-stable.git/drivers/gpu/drm/msm, branch v6.14 Linux kernel stable tree Merge tag 'drm-msm-fixes-2025-02-20' of https://gitlab.freedesktop.org/drm/msm into drm-fixes 2025-02-21T00:50:29+00:00 Dave Airlie airlied@redhat.com 2025-02-21T00:50:28+00:00 9a1cd7d6df5d708ef244f93715855c8e54d79448 Fixes for v6.14-rc4 Display: * More catalog fixes: - to skip watchdog programming through top block if its not present - fix the setting of WB mask to ensure the WB input control is programmed correctly through ping-pong - drop lm_pair for sm6150 as that chipset does not have any 3dmerge block * Fix the mode validation logic for DP/eDP to account for widebus (2ppc) to allow high clock resolutions * Fix to disable dither during encoder disable as otherwise this was causing kms_writeback failure due to resource sharing between * WB and DSI paths as DSI uses dither but WB does not * Fixes for virtual planes, namely to drop extraneous return and fix uninitialized variables * Fix to avoid spill-over of DSC encoder block bits when programming the bits-per-component * Fixes in the DSI PHY to protect against concurrent access of PHY_CMN_CLK_CFG regs between clock and display drivers Core/GPU: * Fix non-blocking fence wait incorrectly rounding up to 1 jiffy timeout * Only print GMU fw version once, instead of each time the GPU resumes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtt2AODBXdod8ULXcAygf_qYvwRDVeUVtODx=2jErp6cA@mail.gmail.com 
Fixes for v6.14-rc4

Display:
* More catalog fixes:
 - to skip watchdog programming through top block if its not present
 - fix the setting of WB mask to ensure the WB input control is programmed
   correctly through ping-pong
 - drop lm_pair for sm6150 as that chipset does not have any 3dmerge block
* Fix the mode validation logic for DP/eDP to account for widebus (2ppc)
  to allow high clock resolutions
* Fix to disable dither during encoder disable as otherwise this was
  causing kms_writeback failure due to resource sharing between
* WB and DSI paths as DSI uses dither but WB does not
* Fixes for virtual planes, namely to drop extraneous return and fix
  uninitialized variables
* Fix to avoid spill-over of DSC encoder block bits when programming
  the bits-per-component
* Fixes in the DSI PHY to protect against concurrent access of
  PHY_CMN_CLK_CFG regs between clock and display drivers

Core/GPU:
* Fix non-blocking fence wait incorrectly rounding up to 1 jiffy timeout
* Only print GMU fw version once, instead of each time the GPU resumes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtt2AODBXdod8ULXcAygf_qYvwRDVeUVtODx=2jErp6cA@mail.gmail.com
drm/msm/dsi/phy: Do not overwite PHY_CMN_CLK_CFG1 when choosing bitclk source 2025-02-15T19:46:42+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2025-02-14T15:08:43+00:00 73f69c6be2a9f22c31c775ec03c6c286bfe12cfa PHY_CMN_CLK_CFG1 register has four fields being used in the driver: DSI clock divider, source of bitclk and two for enabling the DSI PHY PLL clocks. dsi_7nm_set_usecase() sets only the source of bitclk, so should leave all other bits untouched. Use newly introduced dsi_pll_cmn_clk_cfg1_update() to update respective bits without overwriting the rest. While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to make the code more readable and obvious. Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637380/ Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-3-0943b850722c@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> 
PHY_CMN_CLK_CFG1 register has four fields being used in the driver: DSI
clock divider, source of bitclk and two for enabling the DSI PHY PLL
clocks.

dsi_7nm_set_usecase() sets only the source of bitclk, so should leave
all other bits untouched.  Use newly introduced
dsi_pll_cmn_clk_cfg1_update() to update respective bits without
overwriting the rest.

While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to
make the code more readable and obvious.

Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637380/
Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-3-0943b850722c@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG1 against clock driver 2025-02-15T19:46:42+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2025-02-14T15:08:42+00:00 5a97bc924ae0804b8dbf627e357acaa5ef761483 PHY_CMN_CLK_CFG1 register is updated by the PHY driver and by a mux clock from Common Clock Framework: devm_clk_hw_register_mux_parent_hws(). There could be a path leading to concurrent and conflicting updates between PHY driver and clock framework, e.g. changing the mux and enabling PLL clocks. Add dedicated spinlock to be sure all PHY_CMN_CLK_CFG1 updates are synchronized. While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to make the code more readable and obvious. Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637378/ Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-2-0943b850722c@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> 
PHY_CMN_CLK_CFG1 register is updated by the PHY driver and by a mux
clock from Common Clock Framework:
devm_clk_hw_register_mux_parent_hws().  There could be a path leading to
concurrent and conflicting updates between PHY driver and clock
framework, e.g. changing the mux and enabling PLL clocks.

Add dedicated spinlock to be sure all PHY_CMN_CLK_CFG1 updates are
synchronized.

While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to
make the code more readable and obvious.

Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637378/
Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-2-0943b850722c@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG0 updated from driver side 2025-02-15T19:46:42+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2025-02-14T15:08:41+00:00 588257897058a0b1aa47912db4fe93c6ff5e3887 PHY_CMN_CLK_CFG0 register is updated by the PHY driver and by two divider clocks from Common Clock Framework: devm_clk_hw_register_divider_parent_hw(). Concurrent access by the clocks side is protected with spinlock, however driver's side in restoring state is not. Restoring state is called from msm_dsi_phy_enable(), so there could be a path leading to concurrent and conflicting updates with clock framework. Add missing lock usage on the PHY driver side, encapsulated in its own function so the code will be still readable. While shuffling the code, define and use PHY_CMN_CLK_CFG0 bitfields to make the code more readable and obvious. Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/637376/ Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-1-0943b850722c@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> 
PHY_CMN_CLK_CFG0 register is updated by the PHY driver and by two
divider clocks from Common Clock Framework:
devm_clk_hw_register_divider_parent_hw().  Concurrent access by the
clocks side is protected with spinlock, however driver's side in
restoring state is not.  Restoring state is called from
msm_dsi_phy_enable(), so there could be a path leading to concurrent and
conflicting updates with clock framework.

Add missing lock usage on the PHY driver side, encapsulated in its own
function so the code will be still readable.

While shuffling the code, define and use PHY_CMN_CLK_CFG0 bitfields to
make the code more readable and obvious.

Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/637376/
Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-1-0943b850722c@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
drm/msm/dpu: Drop extraneous return in dpu_crtc_reassign_planes() 2025-02-15T19:46:42+00:00 Jessica Zhang quic_jesszhan@quicinc.com 2025-01-08T22:40:48+00:00 5e192eefebaab5bdcf716add8910d7f8a2e30e3c Drop extra return at the end of dpu_crtc_reassign_planes() Fixes: 774bcfb73176 ("drm/msm/dpu: add support for virtual planes") Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/631565/ Link: https://lore.kernel.org/r/20250108-virtual-planes-fixes-v1-2-420cb36df94a@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> 
Drop extra return at the end of dpu_crtc_reassign_planes()

Fixes: 774bcfb73176 ("drm/msm/dpu: add support for virtual planes")
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/631565/
Link: https://lore.kernel.org/r/20250108-virtual-planes-fixes-v1-2-420cb36df94a@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
drm/msm/dpu: Don't leak bits_per_component into random DSC_ENC fields 2025-02-15T19:46:42+00:00 Marijn Suijten marijn.suijten@somainline.org 2025-02-10T23:19:32+00:00 144429831f447223253a0e4376489f84ff37d1a7 What used to be the input_10_bits boolean - feeding into the lowest bit of DSC_ENC - on MSM downstream turned into an accidental OR with the full bits_per_component number when it was ported to the upstream kernel. On typical bpc=8 setups we don't notice this because line_buf_depth is always an odd value (it contains bpc+1) and will also set the 4th bit after left-shifting by 3 (hence this |= bits_per_component is a no-op). Now that guards are being removed to allow more bits_per_component values besides 8 (possible since commit 49fd30a7153b ("drm/msm/dsi: use DRM DSC helpers for DSC setup")), a bpc of 10 will instead clash with the 5th bit which is convert_rgb. This is "fortunately" also always set to true by MSM's dsi_populate_dsc_params() already, but once a bpc of 12 starts being used it'll write into simple_422 which is normally false. To solve all these overlaps, simply replicate downstream code and only set this lowest bit if bits_per_component is equal to 10. It is unclear why DSC requires this only for bpc=10 but not bpc=12, and also notice that this lowest bit wasn't set previously despite having a panel and patch on the list using it without any mentioned issues. Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/636311/ Link: https://lore.kernel.org/r/20250211-dsc-10-bit-v1-1-1c85a9430d9a@somainline.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> 
What used to be the input_10_bits boolean - feeding into the lowest
bit of DSC_ENC - on MSM downstream turned into an accidental OR with
the full bits_per_component number when it was ported to the upstream
kernel.

On typical bpc=8 setups we don't notice this because line_buf_depth is
always an odd value (it contains bpc+1) and will also set the 4th bit
after left-shifting by 3 (hence this |= bits_per_component is a no-op).

Now that guards are being removed to allow more bits_per_component
values besides 8 (possible since commit 49fd30a7153b ("drm/msm/dsi: use
DRM DSC helpers for DSC setup")), a bpc of 10 will instead clash with
the 5th bit which is convert_rgb.  This is "fortunately" also always set
to true by MSM's dsi_populate_dsc_params() already, but once a bpc of 12
starts being used it'll write into simple_422 which is normally false.

To solve all these overlaps, simply replicate downstream code and only
set this lowest bit if bits_per_component is equal to 10.  It is unclear
why DSC requires this only for bpc=10 but not bpc=12, and also notice
that this lowest bit wasn't set previously despite having a panel and
patch on the list using it without any mentioned issues.

Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/636311/
Link: https://lore.kernel.org/r/20250211-dsc-10-bit-v1-1-1c85a9430d9a@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
drm/msm/dpu: Disable dither in phys encoder cleanup 2025-02-15T19:46:42+00:00 Jessica Zhang quic_jesszhan@quicinc.com 2025-02-12T03:59:19+00:00 f063ac6b55df03ed25996bdc84d9e1c50147cfa1 Disable pingpong dither in dpu_encoder_helper_phys_cleanup(). This avoids the issue where an encoder unknowingly uses dither after reserving a pingpong block that was previously bound to an encoder that had enabled dither. Cc: stable@vger.kernel.org Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Closes: https://lore.kernel.org/all/jr7zbj5w7iq4apg3gofuvcwf4r2swzqjk7sshwcdjll4mn6ctt@l2n3qfpujg3q/ Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Fixes: 3c128638a07d ("drm/msm/dpu: add support for dither block in display") Patchwork: https://patchwork.freedesktop.org/patch/636517/ Link: https://lore.kernel.org/r/20250211-dither-disable-v1-1-ac2cb455f6b9@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> 
Disable pingpong dither in dpu_encoder_helper_phys_cleanup().

This avoids the issue where an encoder unknowingly uses dither after
reserving a pingpong block that was previously bound to an encoder that
had enabled dither.

Cc: stable@vger.kernel.org
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Closes: https://lore.kernel.org/all/jr7zbj5w7iq4apg3gofuvcwf4r2swzqjk7sshwcdjll4mn6ctt@l2n3qfpujg3q/
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Fixes: 3c128638a07d ("drm/msm/dpu: add support for dither block in display")
Patchwork: https://patchwork.freedesktop.org/patch/636517/
Link: https://lore.kernel.org/r/20250211-dither-disable-v1-1-ac2cb455f6b9@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
drm/msm/dpu: Fix uninitialized variable 2025-02-15T19:46:42+00:00 Ethan Carter Edwards ethan@ethancedwards.com 2025-02-10T03:51:54+00:00 978ca99d6bd87b84ff7788eea4d2c328a70530f6 There is a possibility for an uninitialized *ret* variable to be returned in some code paths. Fix this by initializing *ret* to 0. Addresses-Coverity-ID: 1642546 ("Uninitialized scalar variable") Fixes: 774bcfb73176 ("drm/msm/dpu: add support for virtual planes") Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/636201/ Link: https://lore.kernel.org/r/20250209-dpu-v2-1-114dfd4ebefd@ethancedwards.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> 
There is a possibility for an uninitialized *ret* variable to be
returned in some code paths.

Fix this by initializing *ret* to 0.

Addresses-Coverity-ID: 1642546 ("Uninitialized scalar variable")
Fixes: 774bcfb73176 ("drm/msm/dpu: add support for virtual planes")
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/636201/
Link: https://lore.kernel.org/r/20250209-dpu-v2-1-114dfd4ebefd@ethancedwards.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
drm/msm/dp: account for widebus and yuv420 during mode validation 2025-02-15T19:46:42+00:00 Abhinav Kumar quic_abhinavk@quicinc.com 2025-02-06T19:46:36+00:00 df9cf852ca3099feb8fed781bdd5d3863af001c8 Widebus allows the DP controller to operate in 2 pixel per clock mode. The mode validation logic validates the mode->clock against the max DP pixel clock. However the max DP pixel clock limit assumes widebus is already enabled. Adjust the mode validation logic to only compare the adjusted pixel clock which accounts for widebus against the max DP pixel clock. Also fix the mode validation logic for YUV420 modes as in that case as well, only half the pixel clock is needed. Cc: stable@vger.kernel.org Fixes: 757a2f36ab09 ("drm/msm/dp: enable widebus feature for display port") Fixes: 6db6e5606576 ("drm/msm/dp: change clock related programming for YUV420 over DP") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dale Whinham <daleyo@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/635789/ Link: https://lore.kernel.org/r/20250206-dp-widebus-fix-v2-1-cb89a0313286@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> 
Widebus allows the DP controller to operate in 2 pixel per clock mode.
The mode validation logic validates the mode->clock against the max
DP pixel clock. However the max DP pixel clock limit assumes widebus
is already enabled. Adjust the mode validation logic to only compare
the adjusted pixel clock which accounts for widebus against the max DP
pixel clock. Also fix the mode validation logic for YUV420 modes as in
that case as well, only half the pixel clock is needed.

Cc: stable@vger.kernel.org
Fixes: 757a2f36ab09 ("drm/msm/dp: enable widebus feature for display port")
Fixes: 6db6e5606576 ("drm/msm/dp: change clock related programming for YUV420 over DP")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dale Whinham <daleyo@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/635789/
Link: https://lore.kernel.org/r/20250206-dp-widebus-fix-v2-1-cb89a0313286@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
drm/msm/dpu: correct LM pairing for SM6150 2025-02-15T19:46:42+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2024-12-17T12:35:40+00:00 24b50b7340ab7e7b004ee6db43d625caa68498b0 The SM6150 platform doesn't have 3DMux (MERGE_3D) block, so it can not split the screen between two LMs. Drop lm_pair fields as they don't make sense for this platform. Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Fixes: cb2f9144693b ("drm/msm/dpu: Add SM6150 support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/629377/ Link: https://lore.kernel.org/r/20241217-dpu-fix-sm6150-v2-1-9acc8f5addf3@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> 
The SM6150 platform doesn't have 3DMux (MERGE_3D) block, so it can not
split the screen between two LMs. Drop lm_pair fields as they don't make
sense for this platform.

Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Fixes: cb2f9144693b ("drm/msm/dpu: Add SM6150 support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629377/
Link: https://lore.kernel.org/r/20241217-dpu-fix-sm6150-v2-1-9acc8f5addf3@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>