linux-stable.git/drivers/gpu/drm/msm, branch v6.1.136 Linux kernel stable tree drm/msm/a6xx: Fix stale rpmh votes from GPU 2025-04-25T08:43:56+00:00 Akhil P Oommen quic_akhilpo@quicinc.com 2025-02-25T19:52:14+00:00 db783adae1e22d6acabebd5941116a65ec26ceec commit f561db72a663f8a73c2250bf3244ce1ce221bed7 upstream. It was observed on sc7180 (A618 gpu) that GPU votes for GX rail and CNOC BCM nodes were not removed after GPU suspend. This was because we skipped sending 'prepare-slumber' request to gmu during suspend sequence in some cases. So, make sure we always call prepare-slumber hfi during suspend. Also, calling prepare-slumber without a prior oob-gpu handshake messes up gmu firmware's internal state. So, do that when required. Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support") Cc: stable@vger.kernel.org Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/639569/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f561db72a663f8a73c2250bf3244ce1ce221bed7 upstream.

It was observed on sc7180 (A618 gpu) that GPU votes for GX rail and CNOC
BCM nodes were not removed after GPU suspend. This was because we
skipped sending 'prepare-slumber' request to gmu during suspend sequence
in some cases. So, make sure we always call prepare-slumber hfi during
suspend. Also, calling prepare-slumber without a prior oob-gpu handshake
messes up gmu firmware's internal state. So, do that when required.

Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support")
Cc: stable@vger.kernel.org
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/639569/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/msm/dsi: Set PHY usescase (and mode) before registering DSI host 2025-04-10T12:33:32+00:00 Marijn Suijten marijn.suijten@somainline.org 2025-02-17T11:17:42+00:00 07e7a7334e60a0573d5e5e6862b6b5db52d72811 [ Upstream commit 660c396c98c061f9696bebacc178b74072e80054 ] Ordering issues here cause an uninitialized (default STANDALONE) usecase to be programmed (which appears to be a MUX) in some cases when msm_dsi_host_register() is called, leading to the slave PLL in bonded-DSI mode to source from a clock parent (dsi1vco) that is off. This should seemingly not be a problem as the actual dispcc clocks from DSI1 that are muxed in the clock tree of DSI0 are way further down, this bit still seems to have an effect on them somehow and causes the right side of the panel controlled by DSI1 to not function. In an ideal world this code is refactored to no longer have such error-prone calls "across subsystems", and instead model the "PLL src" register field as a regular mux so that changing the clock parents programmatically or in DTS via `assigned-clock-parents` has the desired effect. But for the avid reader, the clocks that we *are* muxing into DSI0's tree are way further down, so if this bit turns out to be a simple mux between dsiXvco and out_div, that shouldn't have any effect as this whole tree is off anyway. Fixes: 57bf43389337 ("drm/msm/dsi: Pass down use case to PHY") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/637650/ Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-2-913100d6103f@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 660c396c98c061f9696bebacc178b74072e80054 ]

Ordering issues here cause an uninitialized (default STANDALONE)
usecase to be programmed (which appears to be a MUX) in some cases
when msm_dsi_host_register() is called, leading to the slave PLL in
bonded-DSI mode to source from a clock parent (dsi1vco) that is off.

This should seemingly not be a problem as the actual dispcc clocks from
DSI1 that are muxed in the clock tree of DSI0 are way further down, this
bit still seems to have an effect on them somehow and causes the right
side of the panel controlled by DSI1 to not function.

In an ideal world this code is refactored to no longer have such
error-prone calls "across subsystems", and instead model the "PLL src"
register field as a regular mux so that changing the clock parents
programmatically or in DTS via `assigned-clock-parents` has the
desired effect.
But for the avid reader, the clocks that we *are* muxing into DSI0's
tree are way further down, so if this bit turns out to be a simple mux
between dsiXvco and out_div, that shouldn't have any effect as this
whole tree is off anyway.

Fixes: 57bf43389337 ("drm/msm/dsi: Pass down use case to PHY")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/637650/
Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-2-913100d6103f@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/msm/dpu: Disable dither in phys encoder cleanup 2025-03-07T15:56:38+00:00 Jessica Zhang quic_jesszhan@quicinc.com 2025-02-12T03:59:19+00:00 7e75ccfba9bd64df2b729f9f0155252aac03c37e commit f063ac6b55df03ed25996bdc84d9e1c50147cfa1 upstream. Disable pingpong dither in dpu_encoder_helper_phys_cleanup(). This avoids the issue where an encoder unknowingly uses dither after reserving a pingpong block that was previously bound to an encoder that had enabled dither. Cc: stable@vger.kernel.org Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Closes: https://lore.kernel.org/all/jr7zbj5w7iq4apg3gofuvcwf4r2swzqjk7sshwcdjll4mn6ctt@l2n3qfpujg3q/ Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Fixes: 3c128638a07d ("drm/msm/dpu: add support for dither block in display") Patchwork: https://patchwork.freedesktop.org/patch/636517/ Link: https://lore.kernel.org/r/20250211-dither-disable-v1-1-ac2cb455f6b9@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f063ac6b55df03ed25996bdc84d9e1c50147cfa1 upstream.

Disable pingpong dither in dpu_encoder_helper_phys_cleanup().

This avoids the issue where an encoder unknowingly uses dither after
reserving a pingpong block that was previously bound to an encoder that
had enabled dither.

Cc: stable@vger.kernel.org
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Closes: https://lore.kernel.org/all/jr7zbj5w7iq4apg3gofuvcwf4r2swzqjk7sshwcdjll4mn6ctt@l2n3qfpujg3q/
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Fixes: 3c128638a07d ("drm/msm/dpu: add support for dither block in display")
Patchwork: https://patchwork.freedesktop.org/patch/636517/
Link: https://lore.kernel.org/r/20250211-dither-disable-v1-1-ac2cb455f6b9@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/msm/dpu: Don't leak bits_per_component into random DSC_ENC fields 2025-03-07T15:56:37+00:00 Marijn Suijten marijn.suijten@somainline.org 2025-02-10T23:19:32+00:00 b5065a10b980718c72af59446d79e332fd72763f [ Upstream commit 144429831f447223253a0e4376489f84ff37d1a7 ] What used to be the input_10_bits boolean - feeding into the lowest bit of DSC_ENC - on MSM downstream turned into an accidental OR with the full bits_per_component number when it was ported to the upstream kernel. On typical bpc=8 setups we don't notice this because line_buf_depth is always an odd value (it contains bpc+1) and will also set the 4th bit after left-shifting by 3 (hence this |= bits_per_component is a no-op). Now that guards are being removed to allow more bits_per_component values besides 8 (possible since commit 49fd30a7153b ("drm/msm/dsi: use DRM DSC helpers for DSC setup")), a bpc of 10 will instead clash with the 5th bit which is convert_rgb. This is "fortunately" also always set to true by MSM's dsi_populate_dsc_params() already, but once a bpc of 12 starts being used it'll write into simple_422 which is normally false. To solve all these overlaps, simply replicate downstream code and only set this lowest bit if bits_per_component is equal to 10. It is unclear why DSC requires this only for bpc=10 but not bpc=12, and also notice that this lowest bit wasn't set previously despite having a panel and patch on the list using it without any mentioned issues. Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/636311/ Link: https://lore.kernel.org/r/20250211-dsc-10-bit-v1-1-1c85a9430d9a@somainline.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 144429831f447223253a0e4376489f84ff37d1a7 ]

What used to be the input_10_bits boolean - feeding into the lowest
bit of DSC_ENC - on MSM downstream turned into an accidental OR with
the full bits_per_component number when it was ported to the upstream
kernel.

On typical bpc=8 setups we don't notice this because line_buf_depth is
always an odd value (it contains bpc+1) and will also set the 4th bit
after left-shifting by 3 (hence this |= bits_per_component is a no-op).

Now that guards are being removed to allow more bits_per_component
values besides 8 (possible since commit 49fd30a7153b ("drm/msm/dsi: use
DRM DSC helpers for DSC setup")), a bpc of 10 will instead clash with
the 5th bit which is convert_rgb.  This is "fortunately" also always set
to true by MSM's dsi_populate_dsc_params() already, but once a bpc of 12
starts being used it'll write into simple_422 which is normally false.

To solve all these overlaps, simply replicate downstream code and only
set this lowest bit if bits_per_component is equal to 10.  It is unclear
why DSC requires this only for bpc=10 but not bpc=12, and also notice
that this lowest bit wasn't set previously despite having a panel and
patch on the list using it without any mentioned issues.

Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/636311/
Link: https://lore.kernel.org/r/20250211-dsc-10-bit-v1-1-1c85a9430d9a@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/msm/dp: set safe_to_exit_level before printing it 2025-02-21T12:48:54+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2024-12-02T10:06:31+00:00 cd2f69b23fc76456c52fb4a8b43155a09ac452c7 [ Upstream commit 7dee35d79bb046bfd425aa9e58a82414f67c1cec ] Rather than printing random garbage from stack and pretending that it is the default safe_to_exit_level, set the variable beforehand. Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202411081748.0PPL9MIj-lkp@intel.com/ Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/626804/ Link: https://lore.kernel.org/r/20241202-fd-dp-audio-fixup-v2-1-d9187ea96dad@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7dee35d79bb046bfd425aa9e58a82414f67c1cec ]

Rather than printing random garbage from stack and pretending that it is
the default safe_to_exit_level, set the variable beforehand.

Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411081748.0PPL9MIj-lkp@intel.com/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/626804/
Link: https://lore.kernel.org/r/20241202-fd-dp-audio-fixup-v2-1-d9187ea96dad@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/msm: DEVFREQ_GOV_SIMPLE_ONDEMAND is no longer needed 2024-12-14T18:54:55+00:00 Randy Dunlap rdunlap@infradead.org 2023-02-20T01:04:28+00:00 746ed28a968e8faad049ada24a2de00b3253f6a1 commit a722511b18268bd1f7084eee243af416b85f288f upstream. DRM_MSM no longer needs DEVFREQ_GOV_SIMPLE_ONDEMAND (since commit dbd7a2a941b8 ("PM / devfreq: Fix build issues with devfreq disabled") in linux-next), so remove that select from the DRM_MSM Kconfig file. Fixes: 6563f60f14cb ("drm/msm/gpu: Add devfreq tuning debugfs") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/523353/ Link: https://lore.kernel.org/r/20230220010428.16910-1-rdunlap@infradead.org [rob: tweak commit message to make checkpatch.pl happy] Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a722511b18268bd1f7084eee243af416b85f288f upstream.

DRM_MSM no longer needs DEVFREQ_GOV_SIMPLE_ONDEMAND (since commit
dbd7a2a941b8 ("PM / devfreq: Fix build issues with devfreq disabled")
in linux-next), so remove that select from the DRM_MSM Kconfig file.

Fixes: 6563f60f14cb ("drm/msm/gpu: Add devfreq tuning debugfs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/523353/
Link: https://lore.kernel.org/r/20230220010428.16910-1-rdunlap@infradead.org
[rob: tweak commit message to make checkpatch.pl happy]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/msm/dpu: cast crtc_clk calculation to u64 in _dpu_core_perf_calc_clk() 2024-12-14T18:53:31+00:00 Zichen Xie zichenxie0106@gmail.com 2024-10-29T19:42:10+00:00 7f6f583be369aed4a848f4dc9241490d1caedfb3 [ Upstream commit 20c7b42d9dbd048019bfe0af39229e3014007a98 ] There may be a potential integer overflow issue in _dpu_core_perf_calc_clk(). crtc_clk is defined as u64, while mode->vtotal, mode->hdisplay, and drm_mode_vrefresh(mode) are defined as a smaller data type. The result of the calculation will be limited to "int" in this case without correct casting. In screen with high resolution and high refresh rate, integer overflow may happen. So, we recommend adding an extra cast to prevent potential integer overflow. Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Signed-off-by: Zichen Xie <zichenxie0106@gmail.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/622206/ Link: https://lore.kernel.org/r/20241029194209.23684-1-zichenxie0106@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 20c7b42d9dbd048019bfe0af39229e3014007a98 ]

There may be a potential integer overflow issue in
_dpu_core_perf_calc_clk(). crtc_clk is defined as u64, while
mode->vtotal, mode->hdisplay, and drm_mode_vrefresh(mode) are defined as
a smaller data type. The result of the calculation will be limited to
"int" in this case without correct casting. In screen with high
resolution and high refresh rate, integer overflow may happen.
So, we recommend adding an extra cast to prevent potential
integer overflow.

Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622206/
Link: https://lore.kernel.org/r/20241029194209.23684-1-zichenxie0106@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/msm/gpu: Check the status of registration to PM QoS 2024-12-14T18:53:30+00:00 Lukasz Luba lukasz.luba@arm.com 2024-10-18T11:18:11+00:00 1867879b7a47bddaac5db3a140aeb1e338adeb1e [ Upstream commit 8f32ddd87e499ba6d2dc74ce30b6932baf1e1fc3 ] There is a need to check the returned value of the registration function. In case of returned error, print that and stop the init process. Fixes: 7c0ffcd40b16 ("drm/msm/gpu: Respect PM QoS constraints") Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Patchwork: https://patchwork.freedesktop.org/patch/620336/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8f32ddd87e499ba6d2dc74ce30b6932baf1e1fc3 ]

There is a need to check the returned value of the registration function.
In case of returned error, print that and stop the init process.

Fixes: 7c0ffcd40b16 ("drm/msm/gpu: Respect PM QoS constraints")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Patchwork: https://patchwork.freedesktop.org/patch/620336/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/msm/gpu: Bypass PM QoS constraint for idle clamp 2024-12-14T18:53:30+00:00 Rob Clark robdclark@chromium.org 2023-01-10T23:14:43+00:00 372f00e22e06e3bf91b25a69cb4bdd312c46add1 [ Upstream commit fadcc3ab1302d4e5baa32c272b658221f0066696 ] Change idle freq clamping back to the direct method, bypassing PM QoS requests. The problem with using PM QoS requests is they call (indirectly) the governors ->get_target_freq() which goes thru a get_dev_status() cycle. The problem comes when the GPU becomes active again and we remove the idle-clamp request, we go through another get_dev_status() cycle for the period that the GPU has been idle, which triggers the governor to lower the target freq excessively. This partially reverts commit 7c0ffcd40b16 ("drm/msm/gpu: Respect PM QoS constraints"), but preserves the use of boost QoS request, so that it will continue to play nicely with other QoS requests such as a cooling device. This also mostly undoes commit 78f815c1cf8f ("drm/msm: return the average load over the polling period") Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/517785/ Link: https://lore.kernel.org/r/20230110231447.1939101-3-robdclark@gmail.com Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Stable-dep-of: 8f32ddd87e49 ("drm/msm/gpu: Check the status of registration to PM QoS") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fadcc3ab1302d4e5baa32c272b658221f0066696 ]

Change idle freq clamping back to the direct method, bypassing PM QoS
requests.  The problem with using PM QoS requests is they call
(indirectly) the governors ->get_target_freq() which goes thru a
get_dev_status() cycle.  The problem comes when the GPU becomes active
again and we remove the idle-clamp request, we go through another
get_dev_status() cycle for the period that the GPU has been idle, which
triggers the governor to lower the target freq excessively.

This partially reverts commit 7c0ffcd40b16 ("drm/msm/gpu: Respect PM QoS
constraints"), but preserves the use of boost QoS request, so that it
will continue to play nicely with other QoS requests such as a cooling
device.  This also mostly undoes commit 78f815c1cf8f ("drm/msm: return the
average load over the polling period")

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/517785/
Link: https://lore.kernel.org/r/20230110231447.1939101-3-robdclark@gmail.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Stable-dep-of: 8f32ddd87e49 ("drm/msm/gpu: Check the status of registration to PM QoS")
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/msm/gpu: Add devfreq tuning debugfs 2024-12-14T18:53:30+00:00 Rob Clark robdclark@chromium.org 2023-01-10T23:14:42+00:00 5d187dcbaa037bd61f3accc5e3a1a315ac937744 [ Upstream commit 6563f60f14cbb3dcbdc4e1d8469fc0fbaaa80544 ] Make the handful of tuning knobs available visible via debugfs. v2: select DEVFREQ_GOV_SIMPLE_ONDEMAND because for some reason struct devfreq_simple_ondemand_data depends on this Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/517784/ Link: https://lore.kernel.org/r/20230110231447.1939101-2-robdclark@gmail.com Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Stable-dep-of: 8f32ddd87e49 ("drm/msm/gpu: Check the status of registration to PM QoS") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6563f60f14cbb3dcbdc4e1d8469fc0fbaaa80544 ]

Make the handful of tuning knobs available visible via debugfs.

v2: select DEVFREQ_GOV_SIMPLE_ONDEMAND because for some reason
    struct devfreq_simple_ondemand_data depends on this

Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/517784/
Link: https://lore.kernel.org/r/20230110231447.1939101-2-robdclark@gmail.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Stable-dep-of: 8f32ddd87e49 ("drm/msm/gpu: Check the status of registration to PM QoS")
Signed-off-by: Sasha Levin <sashal@kernel.org>