linux-stable.git/drivers/gpu/drm/msm, branch v6.0.4

drm/msm/dp: correct 1.62G link rate at dp_catalog_ctrl_config_msa()

2022-10-21T10:38:28+00:00

[ Upstream commit aa0bff10af1c4b92e6b56e3e1b7f81c660d3ba78 ]

At current implementation there is an extra 0 at 1.62G link rate which
cause no correct pixel_div selected for 1.62G link rate to calculate
mvid and nvid. This patch delete the extra 0 to have mvid and nvid be
calculated correctly.

Changes in v2:
-- fix Fixes tag's text

Changes in v3:
-- fix misspelling of "Reviewed-by"

Fixes: 937f941ca06f  ("drm/msm/dp: Use qmp phy for DP PLL and PHY")
Signed-off-by: Kuogee Hsieh 
Reviewed-by: Stephen Boyd 
Reviewed-by: Abhinav Kumar 
Patchwork: https://patchwork.freedesktop.org/patch/499328/
Link: https://lore.kernel.org/r/1661372150-3764-1-git-send-email-quic_khsieh@quicinc.com
[DB: rewrapped commit message]
Signed-off-by: Dmitry Baryshkov 
Signed-off-by: Rob Clark 
Signed-off-by: Sasha Levin

drm/msm/dpu: index dpu_kms->hw_vbif using vbif_idx

2022-10-21T10:38:28+00:00

[ Upstream commit 7538f80ae0d98bf51eb89eee5344aec219902d42 ]

Remove loops over hw_vbif. Instead always VBIF's idx as an index in the
array. This fixes an error in dpu_kms_hw_init(), where we fill
dpu_kms->hw_vbif[i], but check for an error pointer at
dpu_kms->hw_vbif[vbif_idx].

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov 
Reviewed-by: Abhinav Kumar 
Patchwork: https://patchwork.freedesktop.org/patch/489569/
Link: https://lore.kernel.org/r/20220615125703.24647-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov 
Signed-off-by: Rob Clark 
Signed-off-by: Sasha Levin

drm/msm: lookup the ICC paths in both mdp5/dpu and mdss devices

2022-10-21T10:38:27+00:00

[ Upstream commit 5ccdcecaf8f732f593e359ebfb65de96b11bae66 ]

The commit 6874f48bb8b0 ("drm/msm: make mdp5/dpu devices master
components") changed the MDP5 driver to look for the interconnect paths
in the MDSS device rather than in the MDP5 device itself. This was left
unnoticed since on my testing devices the interconnects probably didn't
reach the sync state.

Rather than just using the MDP5 device for ICC path lookups for the MDP5
devices, introduce an additional helper to check both MDP5/DPU and MDSS
nodes. This will be helpful for the MDP5->DPU conversion, since the
driver will have to check both nodes.

Fixes: 6874f48bb8b0 ("drm/msm: make mdp5/dpu devices master components")
Reported-by: Marijn Suijten 
Reported-by: Yassine Oudjana 
Signed-off-by: Dmitry Baryshkov 
Tested-by: Marijn Suijten  # On sdm630
Tested-by: Yassine Oudjana  # msm8996
Patchwork: https://patchwork.freedesktop.org/patch/496488/
Link: https://lore.kernel.org/r/20220805115630.506391-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov 
Signed-off-by: Rob Clark 
Signed-off-by: Sasha Levin

drm/msm: Make .remove and .shutdown HW shutdown consistent

2022-10-21T10:38:23+00:00

[ Upstream commit 0a58d2ae572adaec8d046f8d35b40c2c32ac7468 ]

Drivers' .remove and .shutdown callbacks are executed on different code
paths. The former is called when a device is removed from the bus, while
the latter is called at system shutdown time to quiesce the device.

This means that some overlap exists between the two, because both have to
take care of properly shutting down the hardware. But currently the logic
used in these two callbacks isn't consistent in msm drivers, which could
lead to kernel panic.

For example, on .remove the component is deleted and its .unbind callback
leads to the hardware being shutdown but only if the DRM device has been
marked as registered.

That check doesn't exist in the .shutdown logic and this can lead to the
driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't
been properly initialized.

A situation like this can happen if drivers for expected sub-devices fail
to probe, since the .bind callback will never be executed. If that is the
case, drm_atomic_helper_shutdown() will attempt to take mutexes that are
only initialized if drm_mode_config_init() is called during a device bind.

This bug was attempted to be fixed in commit 623f279c7781 ("drm/msm: fix
shutdown hook in case GPU components failed to bind"), but unfortunately
it still happens in some cases as the one mentioned above, i.e:

  systemd-shutdown[1]: Powering off.
  kvm: exiting hardware virtualization
  platform wifi-firmware.0: Removing from iommu group 12
  platform video-firmware.0: Removing from iommu group 10
  ------------[ cut here ]------------
  WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0
  ...
  Hardware name: Google CoachZ (rev3+) (DT)
  pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0
  lr : drm_modeset_lock_all_ctx+0x48/0x3d0
  sp : ffff80000805bb80
  x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000
  x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030
  x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800
  x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034
  x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
  x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
  x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
  x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
  x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
  x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0
  Call trace:
   drm_modeset_lock_all_ctx+0x3c4/0x3d0
   drm_atomic_helper_shutdown+0x70/0x134
   msm_drv_shutdown+0x30/0x40
   platform_shutdown+0x28/0x40
   device_shutdown+0x148/0x350
   kernel_power_off+0x38/0x80
   __do_sys_reboot+0x288/0x2c0
   __arm64_sys_reboot+0x28/0x34
   invoke_syscall+0x48/0x114
   el0_svc_common.constprop.0+0x44/0xec
   do_el0_svc+0x2c/0xc0
   el0_svc+0x2c/0x84
   el0t_64_sync_handler+0x11c/0x150
   el0t_64_sync+0x18c/0x190
  ---[ end trace 0000000000000000 ]---
  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
  Mem abort info:
    ESR = 0x0000000096000004
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
    FSC = 0x04: level 0 translation fault
  Data abort info:
    ISV = 0, ISS = 0x00000004
    CM = 0, WnR = 0
  user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000
  [0000000000000018] pgd=0000000000000000, p4d=0000000000000000
  Internal error: Oops: 96000004 [#1] PREEMPT SMP
  ...
  Hardware name: Google CoachZ (rev3+) (DT)
  pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : ww_mutex_lock+0x28/0x32c
  lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0
  sp : ffff80000805bb50
  x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000
  x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000018
  x23: ffff80000805bc10 x22: ffff327c039c5ad8 x21: ffff327c039c5800
  x20: ffff80000805bbe8 x19: 0000000000000018 x18: 0000000000000034
  x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
  x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
  x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
  x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
  x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
  x2 : ffff327c00128000 x1 : 0000000000000000 x0 : 0000000000000018
  Call trace:
   ww_mutex_lock+0x28/0x32c
   drm_modeset_lock_all_ctx+0x1b0/0x3d0
   drm_atomic_helper_shutdown+0x70/0x134
   msm_drv_shutdown+0x30/0x40
   platform_shutdown+0x28/0x40
   device_shutdown+0x148/0x350
   kernel_power_off+0x38/0x80
   __do_sys_reboot+0x288/0x2c0
   __arm64_sys_reboot+0x28/0x34
   invoke_syscall+0x48/0x114
   el0_svc_common.constprop.0+0x44/0xec
   do_el0_svc+0x2c/0xc0
   el0_svc+0x2c/0x84
   el0t_64_sync_handler+0x11c/0x150
   el0t_64_sync+0x18c/0x190
  Code: aa0103f4 d503201f d2800001 aa0103e3 (c8e37c02)
  ---[ end trace 0000000000000000 ]---
  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  Kernel Offset: 0x495d77c00000 from 0xffff800008000000
  PHYS_OFFSET: 0xffffcd8500000000
  CPU features: 0x800,00c2a015,19801c82
  Memory Limit: none
  ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---

Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver")
Signed-off-by: Javier Martinez Canillas 
Reviewed-by: Abhinav Kumar 
Link: https://patchwork.freedesktop.org/patch/msgid/20220816134612.916527-1-javierm@redhat.com
Signed-off-by: Sasha Levin

Merge tag 'drm-msm-fixes-2022-08-27' of https://gitlab.freedesktop.org/drm/msm into drm-fixes

2022-09-01T19:58:52+00:00

Fixes for v6.0

- Fix for inconsistent indenting in function msm_dsi_dphy_timing_calc_v3.
  This fixes a smatch warning reported by kbot
- Fix to make eDP the first connector in the connected list. This was
  mainly done to address a screen corruption issue we were seeing on
  sc7280 boards which have eDP as the primary display. The corruption
  itself is from usermode but we decided to fix it this way because
  things work correct with the primary display as the first one for
  usermode
- Fix to populate intf_cfg correctly before calling reset_intf_cfg().
  Without this, the display pipeline is not torn down correctly for
  writeback
- Specify the correct number of DSI regulators for SDM660. It should
  have been 1 but 2 was mentioned
- Specify the correct number of DSI regulators for MSM8996. It should
  have been 3 but 2 was mentioned
- Fix for removing DP_RECOVERED_CLOCK_OUT_EN bit for tps4 link training
  for DP. This was causing link training failures and hence no display
  for a specific DP to HDMI cable on chromebooks
- Fix probe-deferral crash in gpu devfreq
- Fix gpu debugfs deadlock

Signed-off-by: Dave Airlie 
From: Rob Clark 
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuY=jd44itwTkLXVqhnoKgY0BswPTrxDTxCiPG3WbmLA@mail.gmail.com

drm/msm/rd: Fix FIFO-full deadlock

2022-08-15T17:19:53+00:00

If the previous thing cat'ing $debugfs/rd left the FIFO full, then
subsequent open could deadlock in rd_write() (because open is blocked,
not giving a chance for read() to consume any data in the FIFO).  Also
it is generally a good idea to clear out old data from the FIFO.

Signed-off-by: Rob Clark 
Patchwork: https://patchwork.freedesktop.org/patch/496706/
Link: https://lore.kernel.org/r/20220807160901.2353471-2-robdclark@gmail.com

drm/msm/gpu: Drop qos request if devm_devfreq_add_device() fails

2022-08-15T17:19:18+00:00

In the event that devm_devfreq_add_device() fails the device's qos freq
list is left referencing df->idle_freq and df->boost_freq. Attempting to
initialize devfreq again after a probe deferral will then cause invalid
memory accesses in dev_pm_qos_add_request().

Fix this by dropping the requests in the error path.

Fixes: 7c0ffcd40b16 ("drm/msm/gpu: Respect PM QoS constraints")
Signed-off-by: Bjorn Andersson 
Reviewed-by: Rob Clark 
Reviewed-by: Dmitry Baryshkov 
Patchwork: https://patchwork.freedesktop.org/patch/493001/
Link: https://lore.kernel.org/r/20220708162632.3529864-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark

drm/msm/dsi: Fix number of regulators for SDM660

2022-08-11T23:00:54+00:00

1 regulator is listed but the number 2 is specified. This presumably
means we try to get a regulator with no name. Fix it.

Fixes: 462f7017a691 ("drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660")
Signed-off-by: Douglas Anderson 
Reviewed-by: Dmitry Baryshkov 
Reviewed-by: Marijn Suijten 
Reviewed-by: Abhinav Kumar 
Patchwork: https://patchwork.freedesktop.org/patch/496323/
Link: https://lore.kernel.org/r/20220804073608.v4.2.I94b3c3e412b7c208061349f05659e126483171b1@changeid
Signed-off-by: Abhinav Kumar

drm/msm/dsi: Fix number of regulators for msm8996_dsi_cfg

2022-08-11T23:00:16+00:00

3 regulators are listed but the number 2 is specified. Fix it.

Fixes: 3a3ff88a0fc1 ("drm/msm/dsi: Add 8x96 info in dsi_cfg")
Signed-off-by: Douglas Anderson 
Reviewed-by: Dmitry Baryshkov 
Reviewed-by: Abhinav Kumar 
Patchwork: https://patchwork.freedesktop.org/patch/496318/
Link: https://lore.kernel.org/r/20220804073608.v4.1.I1056ee3f77f71287f333279efe4c85f88d403f65@changeid
Signed-off-by: Abhinav Kumar

drm/msm/dp: delete DP_RECOVERED_CLOCK_OUT_EN to fix tps4

2022-08-11T22:58:52+00:00

Data Symbols scrambled is required for tps4 at link training 2.
Therefore SCRAMBLING_DISABLE bit should not be set for tps4 to
work.

RECOVERED_CLOCK_OUT_EN is for enable simple EYE test for jitter
measurement with minimal equipment for embedded applications purpose
and is not required to be set during normal operation. Current
implementation always have RECOVERED_CLOCK_OUT_EN bit set which
cause SCRAMBLING_DISABLE bit wrongly set at tps4 which prevent
tps4 from working.

This patch delete setting RECOVERED_CLOCK_OUT_EN to fix
SCRAMBLING_DISABLE be wrongly set at tps4.

Changes in v2:
-- fix Fixes tag

Changes in v3:
-- revise commit text

Changes in v4:
-- fix commit text newline

Changes in v5:
-- fix commit text line over 75 chars

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Kuogee Hsieh 

Reviewed-by: Abhinav Kumar 
Reviewed-by: Stephen Boyd 
Reviewed-by: Dmitry Baryshkov 
Patchwork: https://patchwork.freedesktop.org/patch/497194/
Link: https://lore.kernel.org/r/1660258670-4200-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar