<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/gpu/drm/msm, branch v4.19.321</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>drm/msm/dpu: don't play tricks with debug macros</title>
<updated>2024-09-04T11:13:05+00:00</updated>
<author>
<name>Dmitry Baryshkov</name>
<email>dmitry.baryshkov@linaro.org</email>
</author>
<published>2024-08-02T19:47:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a996a9abce790d5bd417fac336117f0436b9f87c'/>
<id>a996a9abce790d5bd417fac336117f0436b9f87c</id>
<content type='text'>
[ Upstream commit df24373435f5899a2a98b7d377479c8d4376613b ]

DPU debugging macros need to be converted to a proper drm_debug_*
macros, however this is a going an intrusive patch, not suitable for a
fix. Wire DPU_DEBUG and DPU_DEBUG_DRIVER to always use DRM_DEBUG_DRIVER
to make sure that DPU debugging messages always end up in the drm debug
messages and are controlled via the usual drm.debug mask.

I don't think that it is a good idea for a generic DPU_DEBUG macro to be
tied to DRM_UT_KMS. It is used to report a debug message from driver, so by
default it should go to the DRM_UT_DRIVER channel. While refactoring
debug macros later on we might end up with particular messages going to
ATOMIC or KMS, but DRIVER should be the default.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Reviewed-by: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Patchwork: https://patchwork.freedesktop.org/patch/606932/
Link: https://lore.kernel.org/r/20240802-dpu-fix-wb-v2-2-7eac9eb8e895@linaro.org
Signed-off-by: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit df24373435f5899a2a98b7d377479c8d4376613b ]

DPU debugging macros need to be converted to a proper drm_debug_*
macros, however this is a going an intrusive patch, not suitable for a
fix. Wire DPU_DEBUG and DPU_DEBUG_DRIVER to always use DRM_DEBUG_DRIVER
to make sure that DPU debugging messages always end up in the drm debug
messages and are controlled via the usual drm.debug mask.

I don't think that it is a good idea for a generic DPU_DEBUG macro to be
tied to DRM_UT_KMS. It is used to report a debug message from driver, so by
default it should go to the DRM_UT_DRIVER channel. While refactoring
debug macros later on we might end up with particular messages going to
ATOMIC or KMS, but DRIVER should be the default.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Reviewed-by: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Patchwork: https://patchwork.freedesktop.org/patch/606932/
Link: https://lore.kernel.org/r/20240802-dpu-fix-wb-v2-2-7eac9eb8e895@linaro.org
Signed-off-by: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/msm: use drm_debug_enabled() to check for debug categories</title>
<updated>2024-09-04T11:13:05+00:00</updated>
<author>
<name>Jani Nikula</name>
<email>jani.nikula@intel.com</email>
</author>
<published>2019-09-24T12:59:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=2eb83c10a7a5df6ba6f03bb50a22bf5b1145b050'/>
<id>2eb83c10a7a5df6ba6f03bb50a22bf5b1145b050</id>
<content type='text'>
[ Upstream commit d8db0b36d888b6a5eb392f112dc156e694de2369 ]

Allow better abstraction of the drm_debug global variable in the
future. No functional changes.

v2: Move unlikely() to drm_debug_enabled()

Cc: Rob Clark &lt;robdclark@gmail.com&gt;
Cc: Sean Paul &lt;sean@poorly.run&gt;
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Rob Clark &lt;robdclark@gmail.com&gt;
Signed-off-by: Jani Nikula &lt;jani.nikula@intel.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/c7142cdebb5f6fed527272b333cd6c43c0aa68ec.1569329774.git.jani.nikula@intel.com
Stable-dep-of: df24373435f5 ("drm/msm/dpu: don't play tricks with debug macros")
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit d8db0b36d888b6a5eb392f112dc156e694de2369 ]

Allow better abstraction of the drm_debug global variable in the
future. No functional changes.

v2: Move unlikely() to drm_debug_enabled()

Cc: Rob Clark &lt;robdclark@gmail.com&gt;
Cc: Sean Paul &lt;sean@poorly.run&gt;
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Rob Clark &lt;robdclark@gmail.com&gt;
Signed-off-by: Jani Nikula &lt;jani.nikula@intel.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/c7142cdebb5f6fed527272b333cd6c43c0aa68ec.1569329774.git.jani.nikula@intel.com
Stable-dep-of: df24373435f5 ("drm/msm/dpu: don't play tricks with debug macros")
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/msm/dpu: use kms stored hw mdp block</title>
<updated>2024-06-16T11:23:34+00:00</updated>
<author>
<name>Jeykumar Sankaran</name>
<email>jsanka@codeaurora.org</email>
</author>
<published>2018-09-06T02:08:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=732e700a1689fbdb8ac94faeb7765e81456b0a95'/>
<id>732e700a1689fbdb8ac94faeb7765e81456b0a95</id>
<content type='text'>
[ Upstream commit 57250ca5433306774e7f83b11503609ed1bf28cf ]

Avoid querying RM for hw mdp block. Use the one
stored in KMS during initialization.

changes in v4:
	- none
changes in v5:
	- none

Signed-off-by: Jeykumar Sankaran &lt;jsanka@codeaurora.org&gt;
Reviewed-by: Sean Paul &lt;seanpaul@chromium.org&gt;
Signed-off-by: Sean Paul &lt;seanpaul@chromium.org&gt;
Signed-off-by: Rob Clark &lt;robdclark@gmail.com&gt;
Stable-dep-of: 2b938c3ab0a6 ("drm/msm/dpu: Always flush the slave INTF on the CTL")
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 57250ca5433306774e7f83b11503609ed1bf28cf ]

Avoid querying RM for hw mdp block. Use the one
stored in KMS during initialization.

changes in v4:
	- none
changes in v5:
	- none

Signed-off-by: Jeykumar Sankaran &lt;jsanka@codeaurora.org&gt;
Reviewed-by: Sean Paul &lt;seanpaul@chromium.org&gt;
Signed-off-by: Sean Paul &lt;seanpaul@chromium.org&gt;
Signed-off-by: Rob Clark &lt;robdclark@gmail.com&gt;
Stable-dep-of: 2b938c3ab0a6 ("drm/msm/dpu: Always flush the slave INTF on the CTL")
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/msm/dpu: Ratelimit framedone timeout msgs</title>
<updated>2024-02-23T07:12:49+00:00</updated>
<author>
<name>Rob Clark</name>
<email>robdclark@chromium.org</email>
</author>
<published>2023-12-11T18:19:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=db86a8d0d5ca6a3ca59f00a64ca4293fa9ff3a31'/>
<id>db86a8d0d5ca6a3ca59f00a64ca4293fa9ff3a31</id>
<content type='text'>
[ Upstream commit 2b72e50c62de60ad2d6bcd86aa38d4ccbdd633f2 ]

When we start getting these, we get a *lot*.  So ratelimit it to not
flood dmesg.

Signed-off-by: Rob Clark &lt;robdclark@chromium.org&gt;
Reviewed-by: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Reviewed-by: Marijn Suijten &lt;marijn.suijten@somainline.org&gt;
Patchwork: https://patchwork.freedesktop.org/patch/571584/
Link: https://lore.kernel.org/r/20231211182000.218088-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 2b72e50c62de60ad2d6bcd86aa38d4ccbdd633f2 ]

When we start getting these, we get a *lot*.  So ratelimit it to not
flood dmesg.

Signed-off-by: Rob Clark &lt;robdclark@chromium.org&gt;
Reviewed-by: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Reviewed-by: Marijn Suijten &lt;marijn.suijten@somainline.org&gt;
Patchwork: https://patchwork.freedesktop.org/patch/571584/
Link: https://lore.kernel.org/r/20231211182000.218088-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/msm/mdp4: flush vblank event on disable</title>
<updated>2024-01-25T22:33:35+00:00</updated>
<author>
<name>Dmitry Baryshkov</name>
<email>dmitry.baryshkov@linaro.org</email>
</author>
<published>2023-11-27T21:54:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f7133b078dbe8e5973d5b569b9fd58b5ff068f2c'/>
<id>f7133b078dbe8e5973d5b569b9fd58b5ff068f2c</id>
<content type='text'>
[ Upstream commit c6721b3c6423d8a348ae885a0f4c85e14f9bf85c ]

Flush queued events when disabling the crtc. This avoids timeouts when
we come back and wait for dependencies (like the previous frame's
flip_done).

Fixes: c8afe684c95c ("drm/msm: basic KMS driver for snapdragon")
Signed-off-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Reviewed-by: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Patchwork: https://patchwork.freedesktop.org/patch/569127/
Link: https://lore.kernel.org/r/20231127215401.4064128-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit c6721b3c6423d8a348ae885a0f4c85e14f9bf85c ]

Flush queued events when disabling the crtc. This avoids timeouts when
we come back and wait for dependencies (like the previous frame's
flip_done).

Fixes: c8afe684c95c ("drm/msm: basic KMS driver for snapdragon")
Signed-off-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Reviewed-by: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Patchwork: https://patchwork.freedesktop.org/patch/569127/
Link: https://lore.kernel.org/r/20231127215401.4064128-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/msm/dsi: skip the wait for video mode done if not applicable</title>
<updated>2023-10-25T09:16:22+00:00</updated>
<author>
<name>Abhinav Kumar</name>
<email>quic_abhinavk@quicinc.com</email>
</author>
<published>2023-09-15T20:44:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7f1ff35da2258861c796de589d4a81f5c048587a'/>
<id>7f1ff35da2258861c796de589d4a81f5c048587a</id>
<content type='text'>
[ Upstream commit ab483e3adcc178254eb1ce0fbdfbea65f86f1006 ]

dsi_wait4video_done() API waits for the DSI video mode engine to
become idle so that we can transmit the DCS commands in the
beginning of BLLP. However, with the current sequence, the MDP
timing engine is turned on after the panel's pre_enable() callback
which can send out the DCS commands needed to power up the panel.

During those cases, this API will always timeout and print out the
error spam leading to long bootup times and log flooding.

Fix this by checking if the DSI video engine was actually busy before
waiting for it to become idle otherwise this is a redundant wait.

changes in v2:
	- move the reg read below the video mode check
	- minor fixes in commit text

Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/34
Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support")
Signed-off-by: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Reviewed-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Patchwork: https://patchwork.freedesktop.org/patch/557853/
Link: https://lore.kernel.org/r/20230915204426.19011-1-quic_abhinavk@quicinc.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit ab483e3adcc178254eb1ce0fbdfbea65f86f1006 ]

dsi_wait4video_done() API waits for the DSI video mode engine to
become idle so that we can transmit the DCS commands in the
beginning of BLLP. However, with the current sequence, the MDP
timing engine is turned on after the panel's pre_enable() callback
which can send out the DCS commands needed to power up the panel.

During those cases, this API will always timeout and print out the
error spam leading to long bootup times and log flooding.

Fix this by checking if the DSI video engine was actually busy before
waiting for it to become idle otherwise this is a redundant wait.

changes in v2:
	- move the reg read below the video mode check
	- minor fixes in commit text

Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/34
Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support")
Signed-off-by: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Reviewed-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Patchwork: https://patchwork.freedesktop.org/patch/557853/
Link: https://lore.kernel.org/r/20230915204426.19011-1-quic_abhinavk@quicinc.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/msm/mdp5: Don't leak some plane state</title>
<updated>2023-09-23T08:48:04+00:00</updated>
<author>
<name>Daniel Vetter</name>
<email>daniel.vetter@ffwll.ch</email>
</author>
<published>2023-08-03T20:45:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7fc11a830b2eb07a0e3c6f917e5e636df6fc5d4c'/>
<id>7fc11a830b2eb07a0e3c6f917e5e636df6fc5d4c</id>
<content type='text'>
[ Upstream commit fd0ad3b2365c1c58aa5a761c18efc4817193beb6 ]

Apparently no one noticed that mdp5 plane states leak like a sieve
ever since we introduced plane_state-&gt;commit refcount a few years ago
in 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too
early by tracking commits, v3.")

Fix it by using the right helpers.

Fixes: 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.")
Cc: Maarten Lankhorst &lt;maarten.lankhorst@linux.intel.com&gt;
Cc: Daniel Vetter &lt;daniel.vetter@ffwll.ch&gt;
Cc: Rob Clark &lt;robdclark@gmail.com&gt;
Cc: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Cc: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reported-and-tested-by: dorum@noisolation.com
Cc: dorum@noisolation.com
Signed-off-by: Daniel Vetter &lt;daniel.vetter@intel.com&gt;
Reviewed-by: Rob Clark &lt;robdclark@gmail.com&gt;
Reviewed-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Reviewed-by: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Patchwork: https://patchwork.freedesktop.org/patch/551236/
Link: https://lore.kernel.org/r/20230803204521.928582-1-daniel.vetter@ffwll.ch
Signed-off-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit fd0ad3b2365c1c58aa5a761c18efc4817193beb6 ]

Apparently no one noticed that mdp5 plane states leak like a sieve
ever since we introduced plane_state-&gt;commit refcount a few years ago
in 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too
early by tracking commits, v3.")

Fix it by using the right helpers.

Fixes: 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.")
Cc: Maarten Lankhorst &lt;maarten.lankhorst@linux.intel.com&gt;
Cc: Daniel Vetter &lt;daniel.vetter@ffwll.ch&gt;
Cc: Rob Clark &lt;robdclark@gmail.com&gt;
Cc: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Cc: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reported-and-tested-by: dorum@noisolation.com
Cc: dorum@noisolation.com
Signed-off-by: Daniel Vetter &lt;daniel.vetter@intel.com&gt;
Reviewed-by: Rob Clark &lt;robdclark@gmail.com&gt;
Reviewed-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Reviewed-by: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Patchwork: https://patchwork.freedesktop.org/patch/551236/
Link: https://lore.kernel.org/r/20230803204521.928582-1-daniel.vetter@ffwll.ch
Signed-off-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/msm: Replace drm_framebuffer_{un/reference} with put, get functions</title>
<updated>2023-09-23T08:48:04+00:00</updated>
<author>
<name>Thomas Zimmermann</name>
<email>tzimmermann@suse.de</email>
</author>
<published>2018-09-26T11:48:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=c91104a35ca7485bcd7e2b75b16756b63d50ddc8'/>
<id>c91104a35ca7485bcd7e2b75b16756b63d50ddc8</id>
<content type='text'>
[ Upstream commit f2152d492ca4ff6d53b37edf1a137480c909f6ce ]

This patch unifies the naming of DRM functions for reference counting
of struct drm_framebuffer. The resulting code is more aligned with the
rest of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Signed-off-by: Rob Clark &lt;robdclark@gmail.com&gt;
Stable-dep-of: fd0ad3b2365c ("drm/msm/mdp5: Don't leak some plane state")
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit f2152d492ca4ff6d53b37edf1a137480c909f6ce ]

This patch unifies the naming of DRM functions for reference counting
of struct drm_framebuffer. The resulting code is more aligned with the
rest of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Signed-off-by: Rob Clark &lt;robdclark@gmail.com&gt;
Stable-dep-of: fd0ad3b2365c ("drm/msm/mdp5: Don't leak some plane state")
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/msm: Fix IS_ERR_OR_NULL() vs NULL check in a5xx_submit_in_rb()</title>
<updated>2023-08-11T09:45:32+00:00</updated>
<author>
<name>Gaosheng Cui</name>
<email>cuigaosheng1@huawei.com</email>
</author>
<published>2023-07-17T01:47:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e937c7bfab2a4292df1b09435fd6d070a0d76690'/>
<id>e937c7bfab2a4292df1b09435fd6d070a0d76690</id>
<content type='text'>
[ Upstream commit 6e8a996563ecbe68e49c49abd4aaeef69f11f2dc ]

The msm_gem_get_vaddr() returns an ERR_PTR() on failure, and a null
is catastrophic here, so we should use IS_ERR_OR_NULL() to check
the return value.

Fixes: 6a8bd08d0465 ("drm/msm: add sudo flag to submit ioctl")
Signed-off-by: Gaosheng Cui &lt;cuigaosheng1@huawei.com&gt;
Reviewed-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Reviewed-by: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Reviewed-by: Akhil P Oommen &lt;quic_akhilpo@quicinc.com&gt;
Patchwork: https://patchwork.freedesktop.org/patch/547712/
Signed-off-by: Rob Clark &lt;robdclark@chromium.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 6e8a996563ecbe68e49c49abd4aaeef69f11f2dc ]

The msm_gem_get_vaddr() returns an ERR_PTR() on failure, and a null
is catastrophic here, so we should use IS_ERR_OR_NULL() to check
the return value.

Fixes: 6a8bd08d0465 ("drm/msm: add sudo flag to submit ioctl")
Signed-off-by: Gaosheng Cui &lt;cuigaosheng1@huawei.com&gt;
Reviewed-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Reviewed-by: Abhinav Kumar &lt;quic_abhinavk@quicinc.com&gt;
Reviewed-by: Akhil P Oommen &lt;quic_akhilpo@quicinc.com&gt;
Patchwork: https://patchwork.freedesktop.org/patch/547712/
Signed-off-by: Rob Clark &lt;robdclark@chromium.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/msm/adreno: drop bogus pm_runtime_set_active()</title>
<updated>2023-05-17T09:13:09+00:00</updated>
<author>
<name>Johan Hovold</name>
<email>johan+linaro@kernel.org</email>
</author>
<published>2023-03-03T16:48:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0b94849431687bada834cbdaf4be2c3be45ba724'/>
<id>0b94849431687bada834cbdaf4be2c3be45ba724</id>
<content type='text'>
[ Upstream commit db7662d076c973072d788bd0e8130e04430307a1 ]

The runtime PM status can only be updated while runtime PM is disabled.

Drop the bogus pm_runtime_set_active() call that was made after enabling
runtime PM and which (incidentally but correctly) left the runtime PM
status set to 'suspended'.

Fixes: 2c087a336676 ("drm/msm/adreno: Load the firmware before bringing up the hardware")
Signed-off-by: Johan Hovold &lt;johan+linaro@kernel.org&gt;
Patchwork: https://patchwork.freedesktop.org/patch/524972/
Link: https://lore.kernel.org/r/20230303164807.13124-4-johan+linaro@kernel.org
Signed-off-by: Rob Clark &lt;robdclark@chromium.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit db7662d076c973072d788bd0e8130e04430307a1 ]

The runtime PM status can only be updated while runtime PM is disabled.

Drop the bogus pm_runtime_set_active() call that was made after enabling
runtime PM and which (incidentally but correctly) left the runtime PM
status set to 'suspended'.

Fixes: 2c087a336676 ("drm/msm/adreno: Load the firmware before bringing up the hardware")
Signed-off-by: Johan Hovold &lt;johan+linaro@kernel.org&gt;
Patchwork: https://patchwork.freedesktop.org/patch/524972/
Link: https://lore.kernel.org/r/20230303164807.13124-4-johan+linaro@kernel.org
Signed-off-by: Rob Clark &lt;robdclark@chromium.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
