linux-stable.git/drivers/gpu/drm/msm, branch v3.15.2 Linux kernel stable tree drm/msm/mdp4: cure for the cursor blues (v2) 2014-04-25T12:58:23+00:00 Rob Clark robdclark@gmail.com 2014-04-22T16:27:28+00:00 7d8d9f670513593377cd1442f987ce03a64ba55d The hw cursor is relatively adept at triggering underflows, which manifest as a "blue flash" (since blue is configured as the underflow color). Juggle a few things around to tighten up the timing for setting cursor registers in DONE irq. And most importantly, don't ever disable the hw cursor. Instead flip it to a blank/empty cursor. This seems far more reliable, as even simply clearing the cursor-enable bit (with no other updates in previous/ following frames) can in some cases cause underflow. v1: original v2: add missing locking spotted by Micah Cc: Micah Richert <richert@braincorporation.com> Signed-off-by: Rob Clark <robdclark@gmail.com> 
The hw cursor is relatively adept at triggering underflows, which
manifest as a "blue flash" (since blue is configured as the underflow
color).  Juggle a few things around to tighten up the timing for setting
cursor registers in DONE irq.

And most importantly, don't ever disable the hw cursor.  Instead flip it
to a blank/empty cursor.  This seems far more reliable, as even simply
clearing the cursor-enable bit (with no other updates in previous/
following frames) can in some cases cause underflow.

v1: original
v2: add missing locking spotted by Micah

Cc: Micah Richert <richert@braincorporation.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
drm/msm: default to XR24 rather than AR24 2014-04-25T12:58:23+00:00 Rob Clark robdclark@gmail.com 2014-04-25T12:50:08+00:00 96673ecbd7f638c0865045377a44f53cd8606850 Since X11 is going to create an XR24 fb, if the pixel formats do not match then crtc helpers will think it is a full modeset even if mode is the same, which prevents smooth/flickerless handover from fbcon/plymouth to X11. Signed-off-by: Rob Clark <robdclark@gmail.com> 
Since X11 is going to create an XR24 fb, if the pixel formats do not
match then crtc helpers will think it is a full modeset even if mode is
the same, which prevents smooth/flickerless handover from fbcon/plymouth
to X11.

Signed-off-by: Rob Clark <robdclark@gmail.com>
drm/msm: fix memory leak 2014-04-25T12:58:23+00:00 Micah Richert richert@braincorporation.com 2014-04-09T21:11:31+00:00 1ffa2425bf7cc70f87d5cdbe12175fd4c661dd19 Signed-off-by: Micah Richert <richert@braincorporation.com> Signed-off-by: Rob Clark <robdclark@gmail.com> 
Signed-off-by: Micah Richert <richert@braincorporation.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux 2014-04-08T16:52:16+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-04-08T16:52:16+00:00 e9f37d3a8d126e73f5737ef548cdf6f618e295e4 Pull drm updates from Dave Airlie: "Highlights: - drm: Generic display port aux features, primary plane support, drm master management fixes, logging cleanups, enforced locking checks (instead of docs), documentation improvements, minor number handling cleanup, pseudofs for shared inodes. - ttm: add ability to allocate from both ends - i915: broadwell features, power domain and runtime pm, per-process address space infrastructure (not enabled) - msm: power management, hdmi audio support - nouveau: ongoing GPU fault recovery, initial maxwell support, random fixes - exynos: refactored driver to clean up a lot of abstraction, DP support moved into drm, LVDS bridge support added, parallel panel support - gma500: SGX MMU support, SGX irq handling, asle irq work fixes - radeon: video engine bringup, ring handling fixes, use dp aux helpers - vmwgfx: add rendernode support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits) DRM: armada: fix corruption while loading cursors drm/dp_helper: don't return EPROTO for defers (v2) drm/bridge: export ptn3460_init function drm/exynos: remove MODULE_DEVICE_TABLE definitions ARM: dts: exynos4412-trats2: enable exynos/fimd node ARM: dts: exynos4210-trats: enable exynos/fimd node ARM: dts: exynos4412-trats2: add panel node ARM: dts: exynos4210-trats: add panel node ARM: dts: exynos4: add MIPI DSI Master node drm/panel: add S6E8AA0 driver ARM: dts: exynos4210-universal_c210: add proper panel node drm/panel: add ld9040 driver panel/ld9040: add DT bindings panel/s6e8aa0: add DT bindings drm/exynos: add DSIM driver exynos/dsim: add DT bindings drm/exynos: disallow fbdev initialization if no device is connected drm/mipi_dsi: create dsi devices only for nodes with reg property drm/mipi_dsi: add flags to DSI messages Skip intel_crt_init for Dell XPS 8700 ... 
Pull drm updates from Dave Airlie:
 "Highlights:

   - drm:

     Generic display port aux features, primary plane support, drm
     master management fixes, logging cleanups, enforced locking checks
     (instead of docs), documentation improvements, minor number
     handling cleanup, pseudofs for shared inodes.

   - ttm:

     add ability to allocate from both ends

   - i915:

     broadwell features, power domain and runtime pm, per-process
     address space infrastructure (not enabled)

   - msm:

     power management, hdmi audio support

   - nouveau:

     ongoing GPU fault recovery, initial maxwell support, random fixes

   - exynos:

     refactored driver to clean up a lot of abstraction, DP support
     moved into drm, LVDS bridge support added, parallel panel support

   - gma500:

     SGX MMU support, SGX irq handling, asle irq work fixes

   - radeon:

     video engine bringup, ring handling fixes, use dp aux helpers

   - vmwgfx:

     add rendernode support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits)
  DRM: armada: fix corruption while loading cursors
  drm/dp_helper: don't return EPROTO for defers (v2)
  drm/bridge: export ptn3460_init function
  drm/exynos: remove MODULE_DEVICE_TABLE definitions
  ARM: dts: exynos4412-trats2: enable exynos/fimd node
  ARM: dts: exynos4210-trats: enable exynos/fimd node
  ARM: dts: exynos4412-trats2: add panel node
  ARM: dts: exynos4210-trats: add panel node
  ARM: dts: exynos4: add MIPI DSI Master node
  drm/panel: add S6E8AA0 driver
  ARM: dts: exynos4210-universal_c210: add proper panel node
  drm/panel: add ld9040 driver
  panel/ld9040: add DT bindings
  panel/s6e8aa0: add DT bindings
  drm/exynos: add DSIM driver
  exynos/dsim: add DT bindings
  drm/exynos: disallow fbdev initialization if no device is connected
  drm/mipi_dsi: create dsi devices only for nodes with reg property
  drm/mipi_dsi: add flags to DSI messages
  Skip intel_crt_init for Dell XPS 8700
  ...
Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next 2014-04-03T22:03:21+00:00 Dave Airlie airlied@redhat.com 2014-04-03T22:03:21+00:00 2614dc66837c2a6fd0e14e3f8e72343782c8b784 * 'msm-next' of git://people.freedesktop.org/~robclark/linux: drm/omap: Don't dereference list head when the connectors list is empty drm/msm/mdp: add timeout for irq wait drm/msm: validate flags, etc drm/msm: use componentised device support drm/msm: add chip-id param drm/msm: crank down gpu when inactive drm/msm: spin helper drm/msm: add hang_debug module param drm/msm: hdmi audio support 
* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
  drm/omap: Don't dereference list head when the connectors list is empty
  drm/msm/mdp: add timeout for irq wait
  drm/msm: validate flags, etc
  drm/msm: use componentised device support
  drm/msm: add chip-id param
  drm/msm: crank down gpu when inactive
  drm/msm: spin helper
  drm/msm: add hang_debug module param
  drm/msm: hdmi audio support
drm: Replace crtc fb with primary plane fb (v3) 2014-04-02T00:18:28+00:00 Matt Roper matthew.d.roper@intel.com 2014-04-01T22:22:40+00:00 f4510a2752b75ad5847b7935b68c233cab497f97 Now that CRTC's have a primary plane, there's no need to track the framebuffer in the CRTC. Replace all references to the CRTC fb with the primary plane's fb. This patch was generated by the Coccinelle semantic patching tool using the following rules: @@ struct drm_crtc C; @@ - (C).fb + C.primary->fb @@ struct drm_crtc *C; @@ - (C)->fb + C->primary->fb v3: Generate patch via coccinelle. Actual removal of crtc->fb has been moved to a subsequent patch. v2: Fixup several lingering crtc->fb instances that were missed in the first patch iteration. [Rob Clark] Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> 
Now that CRTC's have a primary plane, there's no need to track the
framebuffer in the CRTC.  Replace all references to the CRTC fb with the
primary plane's fb.

This patch was generated by the Coccinelle semantic patching tool using
the following rules:

        @@ struct drm_crtc C; @@
        -   (C).fb
        +   C.primary->fb

        @@ struct drm_crtc *C; @@
        -   (C)->fb
        +   C->primary->fb

v3: Generate patch via coccinelle.  Actual removal of crtc->fb has been
    moved to a subsequent patch.

v2: Fixup several lingering crtc->fb instances that were missed in the
    first patch iteration.  [Rob Clark]

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
drm/msm: Switch to universal plane API's 2014-04-02T00:18:27+00:00 Matt Roper matthew.d.roper@intel.com 2014-04-01T22:22:39+00:00 2d82d188b2cb11b6b221eb84dda2344ef3cd1bb4 Use drm_universal_plane_init() and drm_crtc_init_with_planes() rather than the legacy drm_plane_init() / drm_crtc_init(). This will ensure that the proper primary plane is registered with the DRM (and eventually exposed to userspace in future patches). Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Rob Clark <robdclark@gmail.com> 
Use drm_universal_plane_init() and drm_crtc_init_with_planes() rather
than the legacy drm_plane_init() / drm_crtc_init().  This will ensure
that the proper primary plane is registered with the DRM (and eventually
exposed to userspace in future patches).

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
drm/msm/mdp: add timeout for irq wait 2014-03-31T14:27:46+00:00 Rob Clark robdclark@gmail.com 2014-03-24T13:12:24+00:00 30b6f8f6792abe582ef25100984a113ac9bc88dd Make things recover a bit more gracefully if we get stuck with no vblank irq ever coming. Signed-off-by: Rob Clark <robdclark@gmail.com> 
Make things recover a bit more gracefully if we get stuck with no vblank
irq ever coming.

Signed-off-by: Rob Clark <robdclark@gmail.com>
drm/msm: validate flags, etc 2014-03-31T14:27:46+00:00 Rob Clark robdclark@gmail.com 2014-03-03T14:42:33+00:00 93ddb0d3b022dfbd963f243bd01741643cebfb28 After reading a nice article on LWN[1], I went back and double checked my handling of invalid-input checking. Turns out there were a couple places I had missed. Since the driver is fairly young, and the devices it supports are really only just barely usable for basic stuff (serial console) with an upstream kernel, I think we should fix this now and revert specific parts of this patch later in the unlikely event that a regression is reported. [1] https://lwn.net/Articles/588444/ Signed-off-by: Rob Clark <robdclark@gmail.com> 
After reading a nice article on LWN[1], I went back and double checked
my handling of invalid-input checking.  Turns out there were a couple
places I had missed.

Since the driver is fairly young, and the devices it supports are really
only just barely usable for basic stuff (serial console) with an
upstream kernel, I think we should fix this now and revert specific
parts of this patch later in the unlikely event that a regression is
reported.

[1] https://lwn.net/Articles/588444/

Signed-off-by: Rob Clark <robdclark@gmail.com>
drm/msm: use componentised device support 2014-03-31T14:27:46+00:00 Rob Clark robdclark@gmail.com 2014-03-03T19:19:12+00:00 060530f1ea6740eb767085008d183f89ccdd289c Signed-off-by: Rob Clark <robdclark@gmail.com> 
Signed-off-by: Rob Clark <robdclark@gmail.com>