linux-stable.git/drivers/gpu/drm/mediatek, branch v6.1.151

drm/mediatek: mtk_dpi: Add checks for reg_h_fre_con existence

2025-06-04T12:40:10+00:00

[ Upstream commit 8c9da7cd0bbcc90ab444454fecf535320456a312 ]

In preparation for adding support for newer DPI instances which
do support direct-pin but do not have any H_FRE_CON register,
like the one found in MT8195 and MT8188, add a branch to check
if the reg_h_fre_con variable was declared in the mtk_dpi_conf
structure for the probed SoC DPI version.

As a note, this is useful specifically only for cases in which
the support_direct_pin variable is true, so mt8195-dpintf is
not affected by any issue.

Reviewed-by: CK Hu 
Signed-off-by: AngeloGioacchino Del Regno 
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-6-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu 
Signed-off-by: Sasha Levin

drm/mediatek: mtk_dpi: Explicitly manage TVD clock in power on/off

2025-04-25T08:43:33+00:00

[ Upstream commit 473c33f5ce651365468503c76f33158aaa1c7dd2 ]

In preparation for adding support for MT8195's HDMI reserved
DPI, add calls to clk_prepare_enable() / clk_disable_unprepare()
for the TVD clock: in this particular case, the aforementioned
clock is not (and cannot be) parented to neither pixel or engine
clocks hence it won't get enabled automatically by the clock
framework.

Please note that on all of the currently supported MediaTek
platforms, the TVD clock is always a parent of either pixel or
engine clocks, and this means that the common clock framework
is already enabling this clock before the children.
On such platforms, this commit will only increase the refcount
of the TVD clock without any functional change.

Reviewed-by: CK Hu 
Signed-off-by: AngeloGioacchino Del Regno 
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-10-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu 
Signed-off-by: Sasha Levin

drm/mediatek: mtk_dpi: Move the input_2p_en bit to platform data

2025-04-25T08:43:33+00:00

[ Upstream commit c90876a695dd83e76680b88b40067275a5982811 ]

In preparation for adding support for MT8195's HDMI reserved DPI
instance, move the input_2p_en bit for DP_INTF to platform data.

While at it, remove the input_2pixel member from platform data as
having this bit implies that the 2pixel feature must be enabled.

Reviewed-by: CK Hu 
Signed-off-by: AngeloGioacchino Del Regno 
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-7-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu 
Signed-off-by: Sasha Levin

drm/mediatek: dsi: fix error codes in mtk_dsi_host_transfer()

2025-04-10T12:33:33+00:00

[ Upstream commit dcb166ee43c3d594e7b73a24f6e8cf5663eeff2c ]

There is a type bug because the return statement:

        return ret < 0 ? ret : recv_cnt;

The issue is that ret is an int, recv_cnt is a u32 and the function
returns ssize_t, which is a signed long.  The way that the type promotion
works is that the negative error codes are first cast to u32 and then
to signed long.  The error codes end up being positive instead of
negative and the callers treat them as success.

Fixes: 81cc7e51c4f1 ("drm/mediatek: Allow commands to be sent during video mode")
Reported-by: kernel test robot 
Closes: https://lore.kernel.org/r/202412210801.iADw0oIH-lkp@intel.com/
Signed-off-by: Dan Carpenter 
Reviewed-by: Mattijs Korpershoek 
Reviewed-by: AngeloGioacchino Del Regno 
Reviewed-by: CK Hu 
Link: https://patchwork.kernel.org/project/dri-devel/patch/b754a408-4f39-4e37-b52d-7706c132e27f@stanley.mountain/
Signed-off-by: Chun-Kuang Hu 
Signed-off-by: Sasha Levin

drm/mediatek: mtk_hdmi: Fix typo for aud_sampe_size member

2025-04-10T12:33:32+00:00

[ Upstream commit 72fcb88e7bbc053ed4fc74cebb0315b98a0f20c3 ]

Rename member aud_sampe_size of struct hdmi_audio_param to
aud_sample_size to fix a typo and enhance readability.

This commit brings no functional changes.

Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support")
Reviewed-by: CK Hu 
Signed-off-by: AngeloGioacchino Del Regno 
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250217154836.108895-20-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu 
Signed-off-by: Sasha Levin

drm/mediatek: mtk_hdmi: Unregister audio platform device on failure

2025-04-10T12:33:32+00:00

[ Upstream commit 0be123cafc06eed0fd1227166a66e786434b0c50 ]

The probe function of this driver may fail after registering the
audio platform device: in that case, the state is not getting
cleaned up, leaving this device registered.

Adding up to the mix, should the probe function of this driver
return a probe deferral for N times, we're registering up to N
audio platform devices and, again, never freeing them up.

To fix this, add a pointer to the audio platform device in the
mtk_hdmi structure, and add a devm action to unregister it upon
driver removal or probe failure.

Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support")
Reviewed-by: CK Hu 
Signed-off-by: AngeloGioacchino Del Regno 
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250217154836.108895-18-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu 
Signed-off-by: Sasha Levin

drm/mediatek: Fix coverity issue with unintentional integer overflow

2025-03-28T20:59:02+00:00

commit b0b0d811eac6b4c52cb9ad632fa6384cf48869e7 upstream.

1. Instead of multiplying 2 variable of different types. Change to
assign a value of one variable and then multiply the other variable.

2. Add a int variable for multiplier calculation instead of calculating
different types multiplier with dma_addr_t variable directly.

Fixes: 1a64a7aff8da ("drm/mediatek: Fix cursor plane no update")
Signed-off-by: Jason-JH.Lin 
Reviewed-by: Alexandre Mergnat 
Reviewed-by: AngeloGioacchino Del Regno 
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230907091425.9526-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu 
[ For certain code segments with coverity issue do not exist in
  function mtk_plane_update_new_state(), those not present in v6.1 are
  not back ported. ]
Signed-off-by: Bin Lan 
Signed-off-by: He Zhe 
Signed-off-by: Greg Kroah-Hartman

drm/mediatek: Add return value check when reading DPCD

2025-01-17T12:34:40+00:00

[ Upstream commit 522908140645865dc3e2fac70fd3b28834dfa7be ]

Check the return value of drm_dp_dpcd_readb() to confirm that
AUX communication is successful. To simplify the code, replace
drm_dp_dpcd_readb() and DP_GET_SINK_COUNT() with drm_dp_read_sink_count().

Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Liankun Yang 
Reviewed-by: Guillaume Ranquet 
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241218113448.2992-1-liankun.yang@mediatek.com/
Signed-off-by: Chun-Kuang Hu 
Signed-off-by: Sasha Levin

drm/mediatek: Fix mode valid issue for dp

2025-01-17T12:34:40+00:00

[ Upstream commit 0d68b55887cedc7487036ed34cb4c2097c4228f1 ]

Fix dp mode valid issue to avoid abnormal display of limit state.

After DP passes link training, it can express the lane count of the
current link status is good. Calculate the maximum bandwidth supported
by DP using the current lane count.

The color format will select the best one based on the bandwidth
requirements of the current timing mode. If the current timing mode
uses RGB and meets the DP link bandwidth requirements, RGB will be used.

If the timing mode uses RGB but does not meet the DP link bandwidthi
requirements, it will continue to check whether YUV422 meets
the DP link bandwidth.

FEC overhead is approximately 2.4% from DP 1.4a spec 2.2.1.4.2.
The down-spread amplitude shall either be disabled (0.0%) or up
to 0.5% from 1.4a 3.5.2.6. Add up to approximately 3% total overhead.

Because rate is already divided by 10,
mode->clock does not need to be multiplied by 10.

Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Liankun Yang 
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241025083036.8829-3-liankun.yang@mediatek.com/
Signed-off-by: Chun-Kuang Hu 
Signed-off-by: Sasha Levin

drm/mediatek: Fix YCbCr422 color format issue for DP

2025-01-17T12:34:40+00:00

[ Upstream commit ef24fbd8f12015ff827973fffefed3902ffd61cc ]

Setting up misc0 for Pixel Encoding Format.

According to the definition of YCbCr in spec 1.2a Table 2-96,
0x1 << 1 should be written to the register.

Use switch case to distinguish RGB, YCbCr422,
and unsupported color formats.

Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Liankun Yang 
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241025083036.8829-2-liankun.yang@mediatek.com/
Signed-off-by: Chun-Kuang Hu 
Signed-off-by: Sasha Levin