linux-stable.git/drivers/gpu/drm/mediatek, branch master

BackMerge tag 'v7.2' into drm-next

2026-08-20T00:58:44+00:00

Linux 7.2

There was a lot of conflicts this round between fixes and next,
and I'd like to get the merge resolutions that we have in drm-tip.

Signed-off-by: Dave Airlie

Merge tag 'mediatek-drm-fixes-20260729' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes

2026-07-31T04:09:35+00:00

Mediatek DRM Fixes - 20260729

1. Check CRTC state before freeing
2. mtk_hdmi: Fix DDC adapter double put in v2
3. mtk_hdmi_common: take i2c adapter module reference
4. mtk_dsi: Enable HS clock only at pre-enable
5. ovl_adaptor: balance component registrations

Signed-off-by: Dave Airlie 

From: Chun-Kuang Hu 
Link: https://patch.msgid.link/20260729131701.4158-1-chunkuang.hu@kernel.org

drm/mediatek: ovl_adaptor: balance component registrations

2026-07-29T12:52:16+00:00

The OVL adaptor registers both an aggregate driver for its child devices
and a component for the main DRM aggregate. Probe currently ignores an
error from registering the child aggregate and leaves that aggregate
registered if registering the DRM component fails. The remove callback
also leaves the DRM component registered.

These imbalances can leave component framework entries referring to a
device whose probe failed or whose driver has been detached. The aggregate
unbind callback also fails to undo component_bind_all(), leaving its child
components marked as bound when the aggregate is removed.

Check the aggregate registration result, unwind it when the component
registration fails, and unregister the component before the aggregate on
remove. Keep runtime PM enabled until both framework registrations have
been removed, and unbind all child components from the aggregate unbind
callback.

Fixes: 453c3364632a ("drm/mediatek: Add ovl_adaptor support for MT8195")
Cc: stable@vger.kernel.org # 6.4+
Co-developed-by: Ijae Kim 
Signed-off-by: Ijae Kim 
Signed-off-by: Myeonghun Pak 
Reviewed-by: CK Hu 
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260721152242.47138-1-mhun512@gmail.com/
Signed-off-by: Chun-Kuang Hu

drm/mediatek: mtk_dsi: Enable HS clock only at pre-enable

2026-07-29T12:45:27+00:00

Commit 76255024cadb ("drm/mediatek: mtk_dsi: enable hs clock
during pre-enable") rightfully moves the HS clock enablement to
before atomic_enable(), but it's moving it to mtk_dsi_poweron(),
which is not only called in the .atomic_pre_enable() callback
for the DRM bridge, but also in the MediaTek DRM's .ddp_start()
callback, which happens way before the bridge ones.

The HS clock enablement should be done at just the right time,
otherwise some bridge chips (or some Display Driver ICs) may
not work correctly: this is seen at least with a Parade DSI to
eDP bridge (PS8640) on the MT8173 Elm Chromebook.

This resolves a regression that was seen on the aforementioned
machine, which was happening only after a suspend-resume cycle.

Cc:  # 7.1.x
Fixes: 76255024cadb ("drm/mediatek: mtk_dsi: enable hs clock during pre-enable")
Signed-off-by: AngeloGioacchino Del Regno 
Tested-by: Adam Thiede 
Reviewed-by: CK Hu 
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260728153145.578404-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu

drm/mediatek: mtk_hdmi_common: take i2c adapter module reference

2026-07-23T23:01:29+00:00

The i2c subsystem currently blocks during adapter deregistration
whenever there are consumers holding a reference.

Switch to using of_get_i2c_adapter_by_node() which also takes a
reference to the adapter module so that an attempt to unload the module
while in use fails gracefully instead of blocking uninterruptibly.

Signed-off-by: Johan Hovold 
Reviewed-by: CK Hu 
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260716132103.1564995-1-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu

drm/mediatek: mtk_hdmi: Fix DDC adapter double put in v2

2026-07-22T23:29:48+00:00

mtk_hdmi_common_probe() gets the DDC adapter with
of_find_i2c_adapter_by_node() and registers a devm action to release the
adapter device reference with put_device().

The HDMI v2 remove callback also calls i2c_put_adapter() on the same DDC
adapter. This is not paired with of_find_i2c_adapter_by_node(): it drops
the adapter device reference before the devm action drops it again, and
it also puts a module reference that was never taken.

Remove the extra i2c_put_adapter() call and drop the now-empty HDMI v2
remove callback. The common devm action releases the adapter device
reference.

Fixes: 8d0f79886273 ("drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188")
Cc: stable@vger.kernel.org
Reviewed-by: Johan Hovold 
Signed-off-by: Guangshuo Li 
Reviewed-by: CK Hu 
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260713112957.884640-1-lgs201920130244@gmail.com/
Signed-off-by: Chun-Kuang Hu

drm/mediatek: Check CRTC state before freeing

2026-07-22T23:14:56+00:00

mtk_crtc_reset() destroys the current CRTC state only when crtc->state
is non-NULL, but it always converts crtc->state to struct mtk_crtc_state
and passes the result to kfree().

When reset is called without an existing state, container_of(NULL, ...)
does not produce NULL. Keep the mtk state free in the same crtc->state
guard as the helper state destruction.

This issue was found by a static analysis checker and confirmed by
manual source review.

Fixes: 2d267b81898e ("drm/mtk: Use __drm_atomic_helper_crtc_reset")
Signed-off-by: Ruoyu Wang 
Reviewed-by: CK Hu 
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260707150528.2270739-1-ruoyuw560@gmail.com/
Signed-off-by: Chun-Kuang Hu

drm/mediatek: dpi: Switch to atomic bridge callbacks

2026-07-15T07:46:11+00:00

The dpi bridge uses the legacy non-atomic enable and disable bridge
callbacks.

In order to remove the legacy bridge callback support from the DRM
bridge core, switch to their atomic counterparts and add the bridge
atomic state handlers.

Generated by the following Coccinelle script:

@ is_bridge @
identifier funcs;
@@

 struct drm_bridge_funcs funcs = {
	...,
 };

@ has_create_state depends on is_bridge @
identifier funcs, f;
@@

struct drm_bridge_funcs funcs = {
  ...,
  .atomic_create_state = f,
  ...,
};

@ update_struct depends on (is_bridge && !has_create_state) @
identifier is_bridge.funcs;
identifier f;
@@

 struct drm_bridge_funcs funcs = {
+	.atomic_create_state = drm_atomic_helper_bridge_create_state,
+	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
 	...,
 };

@ update_pre_enable_struct depends on is_bridge @
identifier is_bridge.funcs;
identifier f;
@@

 struct drm_bridge_funcs funcs = {
 	...,
-	.pre_enable = f,
+	.atomic_pre_enable = f,
 	...,
 };

@ update_pre_enable_impl depends on update_pre_enable_struct @
identifier update_pre_enable_struct.f;
identifier b;
@@

-void f(struct drm_bridge *b)
+void f(struct drm_bridge *b, struct drm_atomic_commit *commit)
 {
	...
 }

@ update_enable_struct depends on is_bridge @
identifier is_bridge.funcs;
identifier f;
@@

 struct drm_bridge_funcs funcs = {
 	...,
-	.enable = f,
+	.atomic_enable = f,
 	...,
 };

@ update_enable_impl depends on update_enable_struct @
identifier update_enable_struct.f;
identifier b;
@@

-void f(struct drm_bridge *b)
+void f(struct drm_bridge *b, struct drm_atomic_commit *commit)
 {
	...
 }

@ update_disable_struct depends on is_bridge @
identifier is_bridge.funcs;
identifier f;
@@

 struct drm_bridge_funcs funcs = {
 	...,
-	.disable = f,
+	.atomic_disable = f,
 	...,
 };

@ update_disable_impl depends on update_disable_struct @
identifier update_disable_struct.f;
identifier b;
@@

-void f(struct drm_bridge *b)
+void f(struct drm_bridge *b, struct drm_atomic_commit *commit)
 {
	...
 }

@ update_post_disable_struct depends on is_bridge @
identifier is_bridge.funcs;
identifier f;
@@

 struct drm_bridge_funcs funcs = {
 	...,
-	.post_disable = f,
+	.atomic_post_disable = f,
 	...,
 };

@ update_post_disable_impl depends on update_post_disable_struct @
identifier update_post_disable_struct.f;
identifier b;
@@

-void f(struct drm_bridge *b)
+void f(struct drm_bridge *b, struct drm_atomic_commit *commit)
 {
	...
 }

Reviewed-by: Luca Ceresoli 
Link: https://patch.msgid.link/20260707-drm-all-atomic-bridges-v2-28-21d03cbca446@kernel.org
Signed-off-by: Maxime Ripard

Merge tag 'drm-misc-next-2026-07-02' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

2026-07-06T23:34:04+00:00

drm-misc-next for 7.3:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
- bridge: Add atomic_create_state callback and helpers, drop atomic_reset
- dp: Add support for DSC max delta BPP
- edid: Parse panel type from DisplayID 2.x Display Parameters
- sysfb: Improve panel, stride and framebuffer size validation

Driver Changes:
- hibmc: Improvements to the plane formats handling, switch to gem-shmem
- nouveau: race fixes, misc improvements

- bridges:
  - Convert all bridges to atomic_create_state

- panels:
  - panel-edp: New quirks for BOE NE160QDM-NY1, MB116AS01

Signed-off-by: Dave Airlie 

From: Maxime Ripard 
Link: https://patch.msgid.link/20260702-powerful-successful-raptor-eded34@houat

Replace by more specific (c files)

2026-07-03T05:38:17+00:00

Replace the #include of  by the more specific
 where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.

Acked-by: Danilo Krummrich 
Acked-by: Takashi Sakamoto 
Acked-by: Bjorn Helgaas 
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub)