linux-stable.git/drivers/gpu/drm/imx/ipuv3, branch linux-6.13.y

Get rid of 'remove_new' relic from platform driver struct

2024-12-01T23:12:43+00:00

The continual trickle of small conversion patches is grating on me, and
is really not helping.  Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:

  /*
   * .remove_new() is a relic from a prototype conversion of .remove().
   * New drivers are supposed to implement .remove(). Once all drivers are
   * converted to not use .remove_new any more, it will be dropped.
   */

This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.

I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.

Then I just removed the old (sic) .remove_new member function, and this
is the end result.  No more unnecessary conversion noise.

Signed-off-by: Linus Torvalds

drm/imx: parallel-display: add legacy bridge Kconfig dependency

2024-10-22T13:37:19+00:00

The driver now uses the legacy bridge helper code but can be configured
to get built without it:

ERROR: modpost: "devm_imx_drm_legacy_bridge" [drivers/gpu/drm/imx/ipuv3/parallel-display.ko] undefined!

Add the required dependency, same as in the ldb driver.

Fixes: f94b9707a1c9 ("drm/imx: parallel-display: switch to imx_legacy_bridge / drm_bridge_connector")
Signed-off-by: Arnd Bergmann 
Reviewed-by: Dmitry Baryshkov 
Signed-off-by: Robert Foss 
Link: https://patchwork.freedesktop.org/patch/msgid/20241015073004.4066457-1-arnd@kernel.org

drm/imx/ipuv3: Run DRM default client setup

2024-09-26T06:28:02+00:00

Call drm_client_setup_with_color_mode() to run the kernel's default
client setup for DRM. Set fbdev_probe in struct drm_driver, so that
the client setup can start the common fbdev client.

v5:
- select DRM_CLIENT_SELECTION

Signed-off-by: Thomas Zimmermann 
Cc: Philipp Zabel 
Cc: Shawn Guo 
Cc: Sascha Hauer 
Cc: Pengutronix Kernel Team 
Cc: Fabio Estevam 
Acked-by: Philipp Zabel 
Acked-by: Javier Martinez Canillas 
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-21-tzimmermann@suse.de

drm/imx: Add missing DRM_BRIDGE_CONNECTOR dependency

2024-09-22T16:17:33+00:00

When drm/bridge-connector was moved to DRM_DISPLAY_HELPER not all
users were updated. Add missing Kconfig selections.

Fixes: 9da7ec9b19d8 ("drm/bridge-connector: move to DRM_DISPLAY_HELPER module")
Signed-off-by: Alexander Stein 
Reviewed-by: Dmitry Baryshkov 
Acked-by: Philipp Zabel 
Link: https://patchwork.freedesktop.org/patch/msgid/20240906063857.2223442-1-alexander.stein@ew.tq-group.com
Signed-off-by: Dmitry Baryshkov

drm/imx/ipuv3: Use IRQF_NO_AUTOEN flag in request_irq()

2024-09-21T20:48:15+00:00

disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.

Fixes: 47b1be5c0f4e ("staging: imx/drm: request irq only after adding the crtc")
Reviewed-by: Dmitry Baryshkov 
Signed-off-by: Jinjie Ruan 
Reviewed-by: Philipp Zabel 
Link: https://patchwork.freedesktop.org/patch/msgid/20240912083020.3720233-4-ruanjinjie@huawei.com
Signed-off-by: Dmitry Baryshkov

drm/imx: move imx_drm_connector_destroy to imx-tve

2024-09-02T23:35:35+00:00

The imx-tve driver is the only remaining user of
imx_drm_connector_destroy(). Move the function to imx-tve.c

Reviewed-by: Philipp Zabel 
Acked-by: Rob Herring 
Tested-by: Chris Healy 
Tested-by: Philipp Zabel  # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-12-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov

drm/imx: parallel-display: switch to imx_legacy_bridge / drm_bridge_connector

2024-09-02T23:35:35+00:00

Use the imx_legacy bridge driver instead of handlign display modes via
the connector node.

All existing usecases already support attaching using
the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag, while the imx_legacy bridge
doesn't support creating connector at all. Switch to
drm_bridge_connector at the same time.

Reviewed-by: Philipp Zabel 
Tested-by: Chris Healy 
Tested-by: Philipp Zabel  # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-11-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov

drm/imx: ldb: switch to imx_legacy_bridge / drm_bridge_connector

2024-09-02T23:35:35+00:00

Use the imx_legacy bridge driver instead of handlign display modes via
the connector node.

All existing usecases already support attaching using
the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag, while the imx_legacy bridge
doesn't support creating connector at all. Switch to
drm_bridge_connector at the same time.

Reviewed-by: Philipp Zabel 
Tested-by: Chris Healy 
Tested-by: Philipp Zabel  # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-10-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov

drm/imx: parallel-display: switch to drm_panel_bridge

2024-09-02T23:20:10+00:00

Defer panel handling to drm_panel_bridge, unifying codepaths for the
panel and bridge cases.

Reviewed-by: Philipp Zabel 
Tested-by: Chris Healy 
Tested-by: Philipp Zabel  # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-8-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov

drm/imx: ldb: switch to drm_panel_bridge

2024-09-02T23:20:10+00:00

Defer panel handling to drm_panel_bridge, unifying codepaths for the
panel and bridge cases. The MFD_SYSCON symbol is moved to select to
prevent Kconfig symbol loops.

Reviewed-by: Philipp Zabel 
Tested-by: Chris Healy 
Tested-by: Philipp Zabel  # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-7-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov