linux-stable.git/drivers/gpu/drm/bridge, branch v6.4.4

drm: bridge: samsung-dsim: Fix PMS Calculator on imx8m[mnp]

2023-07-19T14:35:52+00:00

[ Upstream commit 54f1a83c72250b182fa7722b0c5f6eb5e769598d ]

According to Table 13-45 of the i.MX8M Mini Reference Manual, the min
and max values for M and the frequency range for the VCO_out
calculator were incorrect.  This information was contradicted in other
parts of the mini, nano and plus manuals.  After reaching out to my
NXP Rep, when confronting him about discrepencies in the Nano manual,
he responded with:
 "Yes it is definitely wrong, the one that is part
  of the NOTE in MIPI_DPHY_M_PLLPMS register table against PMS_P,
  PMS_M and PMS_S is not correct. I will report this to Doc team,
  the one customer should be take into account is the Table 13-40
  DPHY PLL Parameters and the Note above."

These updated values also match what is used in the NXP downstream
kernel.

To fix this, make new variables to hold the min and max values of m
and the minimum value of VCO_out, and update the PMS calculator to
use these new variables instead of using hard-coded values to keep
the backwards compatibility with other parts using this driver.

Fixes: 4d562c70c4dc ("drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support")
Signed-off-by: Adam Ford 
Reviewed-by: Lucas Stach 
Tested-by: Chen-Yu Tsai 
Tested-by: Frieder Schrempf 
Reviewed-by: Frieder Schrempf 
Tested-by: Marek Szyprowski 
Reviewed-by: Jagan Teki 
Tested-by: Jagan Teki  # imx8mm-icore
Signed-off-by: Neil Armstrong 
Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-3-aford173@gmail.com
Signed-off-by: Sasha Levin

drm/bridge: ti-sn65dsi83: Fix enable/disable flow to meet spec

2023-07-19T14:35:52+00:00

[ Upstream commit dd9e329af7236e34c566d3705ea32a63069b9b13 ]

The datasheet describes the following initialization flow including
minimum delay times between each step:

1. DSI data lanes need to be in LP-11 and the clock lane in HS mode
2. toggle EN signal
3. initialize registers
4. enable PLL
5. soft reset
6. enable DSI stream
7. check error status register

To meet this requirement we need to make sure the host bridge's
pre_enable() is called first by using the pre_enable_prev_first
flag.

Furthermore we need to split enable() into pre_enable() which covers
steps 2-5 from above and enable() which covers step 7 and is called
after the host bridge's enable().

Signed-off-by: Frieder Schrempf 
Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver")
Tested-by: Alexander Stein  #TQMa8MxML/MBa8Mx
Reviewed-by: Neil Armstrong 
Signed-off-by: Neil Armstrong 
Link: https://patchwork.freedesktop.org/patch/msgid/20230503163313.2640898-3-frieder@fris.de
Signed-off-by: Sasha Levin

drm/bridge: anx7625: Prevent endless probe loop

2023-07-19T14:35:47+00:00

[ Upstream commit 1464e48d69ab7a50a377c9d39f5e5eb3cee2722e ]

During probe, the driver registers i2c dummy devices and populates the
aux bus, which registers a device for the panel. After doing that, the
driver can still defer probe if needed. This ordering of operations is
troublesome however, because the deferred probe work will retry probing
all pending devices every time a new device is registered. Therefore, if
modules need to be loaded in order to satisfy the dependencies for this
driver to complete probe, the kernel will stall, since it'll keep trying
to probe the anx7625 driver, but never succeed, given that modules would
only be loaded after the deferred probe work completes.

Two changes are required to avoid this issue:
* Move of_find_mipi_dsi_host_by_node(), which can defer probe, to before
anx7625_register_i2c_dummy_clients() and
devm_of_dp_aux_populate_ep_devices(), which register devices.
* Make use of the done_probing callback when populating the aux bus,
so that the bridge registration is only done after the panel is
probed. This is required because the panel might need to defer probe,
but the aux bus population needs the i2c dummy devices working, so
this call couldn't just be moved to an earlier point in probe.
One caveat is that if the panel is described outside the aux bus, the
probe loop issue can still happen, but we don't have a way to avoid
it in that case since there's no callback available.

With this patch applied, it's possible to boot on
mt8192-asurada-spherion with

CONFIG_DRM_ANALOGIX_ANX7625=y
CONFIG_MTK_MMSYS=m
CONFIG_BACKLIGHT_PWM=y

and also with

CONFIG_DRM_ANALOGIX_ANX7625=y
CONFIG_MTK_MMSYS=y
CONFIG_BACKLIGHT_PWM=m

Fixes: adca62ec370c ("drm/bridge: anx7625: Support reading edid through aux channel")
Fixes: 269332997a16 ("drm/bridge: anx7625: Return -EPROBE_DEFER if the dsi host was not found")
Reported-by: "kernelci.org bot"
Signed-off-by: Nícolas F. R. A. Prado
Reviewed-by: Robert Foss
Signed-off-by: Robert Foss
Link: https://patchwork.freedesktop.org/patch/msgid/20230518193902.891121-1-nfraprado@collabora.com
Signed-off-by: Sasha Levin

drm/bridge: tc358767: Switch to devm MIPI-DSI helpers

2023-07-19T14:35:44+00:00

[ Upstream commit f47d6140b7a4c858d82d263e7577ff6fb5279a9c ]

DSI device registering and attaching needs to be undone upon
deregistration. This fixes module unload/load.

Fixes: bbfd3190b656 ("drm/bridge: tc358767: Add DSI-to-DPI mode support")
Signed-off-by: Alexander Stein 
Reviewed-by: Robert Foss 
Signed-off-by: Robert Foss 
Link: https://patchwork.freedesktop.org/patch/msgid/20230517122107.1766673-1-alexander.stein@ew.tq-group.com
Signed-off-by: Sasha Levin

drm/bridge: tc358768: fix THS_TRAILCNT computation

2023-07-19T14:35:41+00:00

[ Upstream commit bac7842cd179572e8e0fc2d7b5254e40c6e9e057 ]

Correct computation of THS_TRAILCNT register.

This register must be set to a value that ensure that
THS_TRAIL > 60 ns + 4 x UI
 and
THS_TRAIL > 8 x UI
 and
THS_TRAIL < TEOT
 with
TEOT = 105 ns + (12 x UI)

with the actual value of THS_TRAIL being

(1 + THS_TRAILCNT) x ByteClk cycle + ((1 to 2) + 2) xHSBYTECLK cycle +
 - (PHY output delay)

with PHY output delay being about

(8 + (5 to 6)) x MIPIBitClk cycle in the BitClk conversion.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini 
Reviewed-by: Robert Foss 
Signed-off-by: Robert Foss 
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-9-francesco@dolcini.it
Signed-off-by: Sasha Levin

drm/bridge: tc358768: fix TXTAGOCNT computation

2023-07-19T14:35:41+00:00

[ Upstream commit 3666aad8185af8d0ce164fd3c4974235417d6d0b ]

Correct computation of TXTAGOCNT register.

This register must be set to a value that ensure that the
TTA-GO period = (4 x TLPX)

with the actual value of TTA-GO being

4 x (TXTAGOCNT + 1) x (HSByteClk cycle)

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini 
Reviewed-by: Robert Foss 
Signed-off-by: Robert Foss 
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-8-francesco@dolcini.it
Signed-off-by: Sasha Levin

drm/bridge: tc358768: fix THS_ZEROCNT computation

2023-07-19T14:35:40+00:00

[ Upstream commit 77a089328da791118af9692543a5eedc79eb5fd4 ]

Correct computation of THS_ZEROCNT register.

This register must be set to a value that ensure that
THS_PREPARE + THS_ZERO > 145ns + 10*UI

with the actual value of (THS_PREPARE + THS_ZERO) being

((1 to 2) + 1 + (TCLK_ZEROCNT + 1) + (3 to 4)) x ByteClk cycle +
  + HSByteClk x (2 + (1 to 2)) + (PHY delay)

with PHY delay being about

(8 + (5 to 6)) x MIPIBitClk cycle in the BitClk conversion.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini 
Reviewed-by: Robert Foss 
Signed-off-by: Robert Foss 
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-7-francesco@dolcini.it
Signed-off-by: Sasha Levin

drm/bridge: tc358768: fix TCLK_TRAILCNT computation

2023-07-19T14:35:40+00:00

[ Upstream commit ee18698e212b1659dd0850d7e2ae0f22e16ed3d3 ]

Correct computation of TCLK_TRAILCNT register.

The driver does not implement non-continuous clock mode, so the actual
value doesn't make a practical difference yet. However this change also
ensures that the value does not write to reserved registers bits in case
of under/overflow.

This register must be set to a value that ensures that

TCLK-TRAIL > 60ns
 and
TEOT <= (105 ns + 12 x UI)

with the actual value of TCLK-TRAIL being

(TCLK_TRAILCNT + (1 to 2)) xHSByteClkCycle +
 (2 + (1 to 2)) * HSBYTECLKCycle - (PHY output delay)

with PHY output delay being about

(2 to 3) x MIPIBitClk cycle in the BitClk conversion.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini 
Reviewed-by: Robert Foss 
Signed-off-by: Robert Foss 
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-2-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-3-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-4-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-2-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-3-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-4-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-2-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-3-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-4-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-2-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-3-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-4-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it
Signed-off-by: Sasha Levin

drm/bridge: tc358768: Add atomic_get_input_bus_fmts() implementation

2023-07-19T14:35:40+00:00

[ Upstream commit cec5ccef85bd0128cf895612de54a9d21d2015d0 ]

Add atomic_get_input_bus_fmts() implementation, tc358768 has a parallel
RGB input interface with the actual bus format depending on the amount
of parallel input data lines.

Without this change when the tc358768 is used with less than 24bit the
color mapping is completely wrong.

Signed-off-by: Francesco Dolcini 
Reviewed-by: Robert Foss 
Signed-off-by: Robert Foss 
Link: https://patchwork.freedesktop.org/patch/msgid/20230330095941.428122-7-francesco@dolcini.it
Stable-dep-of: ee18698e212b ("drm/bridge: tc358768: fix TCLK_TRAILCNT computation")
Signed-off-by: Sasha Levin

drm/bridge: tc358768: fix TCLK_ZEROCNT computation

2023-07-19T14:35:40+00:00

[ Upstream commit f9cf811374f42fca31ac34aaf59ee2ae72b89879 ]

Correct computation of TCLK_ZEROCNT register.

This register must be set to a value that ensure that
(TCLK-PREPARECNT + TCLK-ZERO) > 300ns

with the actual value of (TCLK-PREPARECNT + TCLK-ZERO) being

(1 to 2) + (TCLK_ZEROCNT + 1)) x HSByteClkCycle + (PHY output delay)

with PHY output delay being about

(2 to 3) x MIPIBitClk cycle in the BitClk conversion.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini 
Reviewed-by: Robert Foss 
Signed-off-by: Robert Foss 
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it
Signed-off-by: Sasha Levin