linux-stable.git/drivers/gpu/drm/bridge, branch linux-6.11.y Linux kernel stable tree drm/bridge: tc358767: Fix link properties discovery 2024-12-05T12:53:14+00:00 Tomi Valkeinen tomi.valkeinen@ideasonboard.com 2023-11-08T11:27:23+00:00 f4302986bb09acfd5f673ae7282f4fa76641e85e [ Upstream commit 2d343723c7e1f9f6d64f721f07cfdfc2993758d1 ] When a display controller driver uses DRM_BRIDGE_ATTACH_NO_CONNECTOR, tc358767 will behave properly and skip the creation of the connector. However, tc_get_display_props(), which is used to find out about the DP monitor and link, is only called from two places: .atomic_enable() and tc_connector_get_modes(). The latter is only used when tc358767 creates its own connector, i.e. when DRM_BRIDGE_ATTACH_NO_CONNECTOR is _not_ set. Thus, the driver never finds out the link properties before get_edid() is called. With num_lanes of 0 and link_rate of 0 there are not many valid modes... Fix this by adding tc_get_display_props() call at the beginning of get_edid(), so that we have up to date information before looking at the modes. Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Closes: https://lore.kernel.org/all/24282420-b4dd-45b3-bb1c-fc37fe4a8205@siemens.com/ Fixes: de5e6c027ae6 ("drm/bridge: tc358767: add drm_panel_bridge support") Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108-tc358767-v2-2-25c5f70a2159@ideasonboard.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2d343723c7e1f9f6d64f721f07cfdfc2993758d1 ]

When a display controller driver uses DRM_BRIDGE_ATTACH_NO_CONNECTOR,
tc358767 will behave properly and skip the creation of the connector.

However, tc_get_display_props(), which is used to find out about the DP
monitor and link, is only called from two places: .atomic_enable() and
tc_connector_get_modes(). The latter is only used when tc358767 creates
its own connector, i.e. when DRM_BRIDGE_ATTACH_NO_CONNECTOR is _not_
set.

Thus, the driver never finds out the link properties before get_edid()
is called. With num_lanes of 0 and link_rate of 0 there are not many
valid modes...

Fix this by adding tc_get_display_props() call at the beginning of
get_edid(), so that we have up to date information before looking at the
modes.

Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Closes: https://lore.kernel.org/all/24282420-b4dd-45b3-bb1c-fc37fe4a8205@siemens.com/
Fixes: de5e6c027ae6 ("drm/bridge: tc358767: add drm_panel_bridge support")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108-tc358767-v2-2-25c5f70a2159@ideasonboard.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/bridge: it6505: Drop EDID cache on bridge power off 2024-12-05T12:53:11+00:00 Pin-yen Lin treapking@chromium.org 2024-09-26T09:29:09+00:00 26dd231990b7d8b17d652af0734f81e93a9df503 [ Upstream commit 574c558ddb68591c9a4b7a95e45e935ab22c0fc6 ] The bridge might miss the display change events when it's powered off. This happens when a user changes the external monitor when the system is suspended and the embedded controller doesn't not wake AP up. It's also observed that one DP-to-HDMI bridge doesn't work correctly when there is no EDID read after it is powered on. Drop the cache to force an EDID read after system resume to fix this. Fixes: 11feaef69d0c ("drm/bridge: it6505: Add caching for EDID") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-3-treapking@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 574c558ddb68591c9a4b7a95e45e935ab22c0fc6 ]

The bridge might miss the display change events when it's powered off.
This happens when a user changes the external monitor when the system
is suspended and the embedded controller doesn't not wake AP up.

It's also observed that one DP-to-HDMI bridge doesn't work correctly
when there is no EDID read after it is powered on.

Drop the cache to force an EDID read after system resume to fix this.

Fixes: 11feaef69d0c ("drm/bridge: it6505: Add caching for EDID")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-3-treapking@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/bridge: anx7625: Drop EDID cache on bridge power off 2024-12-05T12:53:10+00:00 Pin-yen Lin treapking@chromium.org 2024-09-26T09:29:08+00:00 619b60e0f4b34bbab7c8640a2dc9c76331beed77 [ Upstream commit 00ae002116a14c2e6a342c4c9ae080cdbb9b4b21 ] The bridge might miss the display change events when it's powered off. This happens when a user changes the external monitor when the system is suspended and the embedded controller doesn't not wake AP up. It's also observed that one DP-to-HDMI bridge doesn't work correctly when there is no EDID read after it is powered on. Drop the cache to force an EDID read after system resume to fix this. Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-2-treapking@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 00ae002116a14c2e6a342c4c9ae080cdbb9b4b21 ]

The bridge might miss the display change events when it's powered off.
This happens when a user changes the external monitor when the system
is suspended and the embedded controller doesn't not wake AP up.

It's also observed that one DP-to-HDMI bridge doesn't work correctly
when there is no EDID read after it is powered on.

Drop the cache to force an EDID read after system resume to fix this.

Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-2-treapking@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/bridge: tc358768: Fix DSI command tx 2024-11-22T14:39:54+00:00 Francesco Dolcini francesco.dolcini@toradex.com 2024-09-26T14:12:46+00:00 5f37c4ca89714df52736c4ab6ae6755c4ef44811 commit 32c4514455b2b8fde506f8c0962f15c7e4c26f1d upstream. Wait for the command transmission to be completed in the DSI transfer function polling for the dc_start bit to go back to idle state after the transmission is started. This is documented in the datasheet and failures to do so lead to commands corruption. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Cc: stable@vger.kernel.org Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240926141246.48282-1-francesco@dolcini.it Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240926141246.48282-1-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 32c4514455b2b8fde506f8c0962f15c7e4c26f1d upstream.

Wait for the command transmission to be completed in the DSI transfer
function polling for the dc_start bit to go back to idle state after the
transmission is started.

This is documented in the datasheet and failures to do so lead to
commands corruption.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240926141246.48282-1-francesco@dolcini.it
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926141246.48282-1-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/bridge: Fix assignment of the of_node of the parent to aux bridge 2024-11-01T01:02:42+00:00 Abel Vesa abel.vesa@linaro.org 2024-10-18T12:49:34+00:00 3f73d7b3c487e51127627b2339451272a60ed754 commit 85e444a68126a631221ae32c63fce882bb18a262 upstream. The assignment of the of_node to the aux bridge needs to mark the of_node as reused as well, otherwise resource providers like pinctrl will report a gpio as already requested by a different device when both pinconf and gpios property are present. Fix that by using the device_set_of_node_from_dev() helper instead. Fixes: 6914968a0b52 ("drm/bridge: properly refcount DT nodes in aux bridge drivers") Cc: stable@vger.kernel.org # 6.8 Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241018-drm-aux-bridge-mark-of-node-reused-v2-1-aeed1b445c7d@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241018-drm-aux-bridge-mark-of-node-reused-v2-1-aeed1b445c7d@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 85e444a68126a631221ae32c63fce882bb18a262 upstream.

The assignment of the of_node to the aux bridge needs to mark the
of_node as reused as well, otherwise resource providers like pinctrl will
report a gpio as already requested by a different device when both pinconf
and gpios property are present.
Fix that by using the device_set_of_node_from_dev() helper instead.

Fixes: 6914968a0b52 ("drm/bridge: properly refcount DT nodes in aux bridge drivers")
Cc: stable@vger.kernel.org      # 6.8
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241018-drm-aux-bridge-mark-of-node-reused-v2-1-aeed1b445c7d@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241018-drm-aux-bridge-mark-of-node-reused-v2-1-aeed1b445c7d@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/bridge: lontium-lt8912b: Validate mode in drm_bridge_funcs::mode_valid() 2024-10-04T14:37:46+00:00 Liu Ying victor.liu@nxp.com 2024-08-13T09:16:37+00:00 ecf264933f8cc031e611c893b3e23a28e47643b2 [ Upstream commit fe828fbd87786238b30f44cafd698d975d956c97 ] If the bridge is attached with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set, this driver won't initialize a connector and hence display mode won't be validated in drm_connector_helper_funcs::mode_valid(). So, move the mode validation from drm_connector_helper_funcs::mode_valid() to drm_bridge_funcs::mode_valid(), because the mode validation is always done for the bridge. Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240813091637.1054586-1-victor.liu@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fe828fbd87786238b30f44cafd698d975d956c97 ]

If the bridge is attached with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set,
this driver won't initialize a connector and hence display mode won't be
validated in drm_connector_helper_funcs::mode_valid().  So, move the mode
validation from drm_connector_helper_funcs::mode_valid() to
drm_bridge_funcs::mode_valid(), because the mode validation is always done
for the bridge.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813091637.1054586-1-victor.liu@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/bridge-connector: move to DRM_DISPLAY_HELPER module 2024-09-03T08:18:31+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2024-09-03T02:01:57+00:00 9da7ec9b19d8c1ad4f44e459fa5f93ad7a117dcd drm_bridge_connector is a "leaf" driver, belonging to the display helper, rather than the "CRTC" drm_kms_helper module. Move the driver to the drm/display and add necessary Kconfig selection clauses. Suggested-by: Maxime Ripard <mripard@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard <mripard@kernel.org> 
drm_bridge_connector is a "leaf" driver, belonging to the display
helper, rather than the "CRTC" drm_kms_helper module. Move the driver
to the drm/display and add necessary Kconfig selection clauses.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Merge tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel 2024-07-18T16:34:02+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-07-18T16:34:02+00:00 b3ce7a30847a54a7f96a35e609303d8afecd460b Pull drm updates from Dave Airlie: "There's a lot of stuff in here, amd, i915 and xe have new platform work, lots of core rework around EDID handling, some new COMPILE_TEST options, maintainer changes and a lots of other stuff. Summary: core: - deprecate DRM data and return 0 date - connector: Create a set of helpers to help with HDMI support - Remove driver owner assignments - Allow more drivers to compile with COMPILE_TEST - Conversions to drm_edid - Sprinkle MODULE_DESCRIPTIONS everywhere they are missing - Remove drm_mm_replace_node - print: Add a drm prefix to warn level messages too, remove ___drm_dbg, consolidate prefix handling - New monochrome TV mode variant ttm: - improve number of page faults on some platforms - fix test builds under PREEMPT_RT - more test coverage ci: - Require a more recent version of mesa - improve farm setup and test generation dma-buf: - warn if reserving 0 fence slots - internal API heap enhancements fbdev: - Create memory manager optimized fbdev emulation panic: - Allow to select fonts - improve drm_fb_dma_get_scanout_buffer - Allow to dump kmsg to the screen bridge: - Remove redundant checks on bridge->encoder - Remove drm_bridge_chain_mode_fixup - bridge-connector: Plumb in the new HDMI helper - analogix_dp: Various improvements, handle AUX transfers timeout - samsung-dsim: Fix timings calculation - tc358767: Plenty of small fixes, fix no connector attach, fix clocks - sii902x: state validation improvements panels: - Switch panels from register table initialization to proper code - Now that the panel code tracks the panel state, remove every ad-hoc implementation in the panel drivers - More cleanup of prepare / enable state tracking in drivers - edp: Drop legacy panel compatibles - simple-bridge: Switch to devm_drm_bridge_add - New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology 13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4, Lincoln Technologies LCD197, Ortustech COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti amdgpu: - DCN 4.0.x support - GC 12.0 support - GMC 12.0 support - SDMA 7.0 support - MES12 support - MMHUB 4.1 support - GFX12 modifier and DCC support - lots of IP fixes/updates amdkfd: - Contiguous VRAM allocations - GC 12.0 support - SDMA 7.0 support - SR-IOV fixes - KFD GFX ALU exceptions i915: - Battlemage Xe2 HPD display enablement - Panel Replay enabling - DP AUX-less ALPM/LOBF - Enable link training failure fallback for DP MST links - CMRR (Content Match Refresh Rate) enabling - Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps - Enable eDP AUX based HDR backlight - Support replaying GPU hangs with captured context image - Automate CCS Mode setting during engine resets - lots of refactoring - Support replaying GPU hangs with captured context image - Increase FLR timeout from 3s to 9s - Enable w/a 16021333562 for DG2, MTL and ARL [guc] xe: - update MAINATINERS - New uapi adding OA functionality to Xe - expose l3 bank mask - fix display detect on ADL-N - runtime PM Fixes - Fix silent backmerge issues - More prep for SR-IOV - HWmon additions - per client usage info - Rework GPU page fault handling - Drop EXEC_QUEUE_FLAG_BANNED - Add BMG PCI IDs - Scheduler fixes and improvements - Rename xe_exec_queue::compute to xe_exec_queue::lr - Use ttm_uncached for BO with NEEDS_UC flag - Rename xe perf layer as xe observation layer - lots of refactoring radeon: - Backlight workaround for iMac - Silence UBSAN flex array warnings msm: - Validate registers XML description against schema in CI - core/dpu: SM7150 support - mdp5: Add support for MSM8937 - gpu: Add param for userspace to know if raytracing is supported - gpu: X185 support (aka gpu in X1 laptop chips) - gpu: a505 support ivpu: - hardware scheduler support - profiling support - improvements to the platform support layer - firmware handling improvements - clocks/power mgmt improvements - scheduler/logging improvements habanalabs: - Gradual sleep in polling memory macro - Reduce Gaudi2 MSI-X interrupt count to 128 - Add Gaudi2-D revision support - Add timestamp to CPLD info - Gaudi2: Assume hard-reset by firmware upon MC SEI severe error - Align Gaudi2 interrupt names - Check for errors after preboot is ready - Change habanalabs maintainer and git repo path mgag200: - refactoring and improvements - Add BMC output - enable polling nouveau: - add registry command line v3d: - perf counters improvements zynqmp: - irq and debugfs improvements atmel-hlcdc: - Support XLCDC in sam9x7 mipi-dbi: - Remove mipi_dbi_machine_little_endian - make SPI bits per word configurable - support RGB888 - allow pixel formats to be specified in the DT sun4i: - Rework the blender setup for DE2 panfrost: - Enable MT8188 support vc4: - Monochrome TV support exynos: - fix fallback mode regression - fix memory leak - Use drm_edid_duplicate() instead of kmemdup() etnaviv: - fix i.MX8MP NPU clock gating - workaround FE register cdc issues on some cores - fix DMA sync handling for cached buffers - fix job timeout handling - keep TS enabled on MMUv2 cores for improved performance mediatek: - Convert to platform remove callback returning void- - Drop chain_mode_fixup call in mode_valid() - Fixes the errors of MediaTek display driver found by IGT - Add display support for the MT8365-EVK board - Fix bit depth overwritten for mtk_ovl_set bit_depth() - Fix possible_crtcs calculation - Fix spurious kfree() ast: - refactor mode setting code stm: - Add LVDS support - DSI PHY updates" * tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits) drm/amdgpu/mes12: add missing opcode string drm/amdgpu/mes11: update opcode strings Revert "drm/amd/display: Reset freesync config before update new state" drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB drm/xe: Drop trace_xe_hw_fence_free drm/xe/uapi: Rename xe perf layer as xe observation layer drm/amdgpu: remove exp hw support check for gfx12 drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed drm/amdgpu: flush all cached ras bad pages to eeprom drm/amdgpu: select compute ME engines dynamically drm/amd/display: Allow display DCC for DCN401 drm/amdgpu: select compute ME engines dynamically drm/amdgpu/job: Replace DRM_INFO/ERROR logging drm/amdgpu: select compute ME engines dynamically drm/amd/pm: Ignore initial value in smu response register drm/amdgpu: Initialize VF partition mode drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping MAINTAINERS: fix Xinhui's name MAINTAINERS: update powerplay and swsmu drm/qxl: Pin buffer objects for internal mappings ... 
Pull drm updates from Dave Airlie:
 "There's a lot of stuff in here, amd, i915 and xe have new platform
  work, lots of core rework around EDID handling, some new COMPILE_TEST
  options, maintainer changes and a lots of other stuff. Summary:

  core:
   - deprecate DRM data and return 0 date
   - connector: Create a set of helpers to help with HDMI support
   - Remove driver owner assignments
   - Allow more drivers to compile with COMPILE_TEST
   - Conversions to drm_edid
   - Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
   - Remove drm_mm_replace_node
   - print: Add a drm prefix to warn level messages too, remove
            ___drm_dbg, consolidate prefix handling
   - New monochrome TV mode variant

  ttm:
   - improve number of page faults on some platforms
   - fix test builds under PREEMPT_RT
   - more test coverage

  ci:
   - Require a more recent version of mesa
   - improve farm setup and test generation

  dma-buf:
   - warn if reserving 0 fence slots
   - internal API heap enhancements

  fbdev:
   - Create memory manager optimized fbdev emulation

  panic:
   - Allow to select fonts
   - improve drm_fb_dma_get_scanout_buffer
   - Allow to dump kmsg to the screen

  bridge:
   - Remove redundant checks on bridge->encoder
   - Remove drm_bridge_chain_mode_fixup
   - bridge-connector: Plumb in the new HDMI helper
   - analogix_dp: Various improvements, handle AUX transfers timeout
   - samsung-dsim: Fix timings calculation
   - tc358767: Plenty of small fixes, fix no connector attach, fix
               clocks
   - sii902x: state validation improvements

  panels:
   - Switch panels from register table initialization to proper code
   - Now that the panel code tracks the panel state, remove every ad-hoc
     implementation in the panel drivers
   - More cleanup of prepare / enable state tracking in drivers
   - edp: Drop legacy panel compatibles
   - simple-bridge: Switch to devm_drm_bridge_add
   - New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
                 13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
                 BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
                 PM070WL4, Lincoln Technologies LCD197, Ortustech
                 COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti

  amdgpu:
   - DCN 4.0.x support
   - GC 12.0 support
   - GMC 12.0 support
   - SDMA 7.0 support
   - MES12 support
   - MMHUB 4.1 support
   - GFX12 modifier and DCC support
   - lots of IP fixes/updates

  amdkfd:
   - Contiguous VRAM allocations
   - GC 12.0 support
   - SDMA 7.0 support
   - SR-IOV fixes
   - KFD GFX ALU exceptions

  i915:
   - Battlemage Xe2 HPD display enablement
   - Panel Replay enabling
   - DP AUX-less ALPM/LOBF
   - Enable link training failure fallback for DP MST links
   - CMRR (Content Match Refresh Rate) enabling
   - Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
   - Enable eDP AUX based HDR backlight
   - Support replaying GPU hangs with captured context image
   - Automate CCS Mode setting during engine resets
   - lots of refactoring
   - Support replaying GPU hangs with captured context image
   - Increase FLR timeout from 3s to 9s
   - Enable w/a 16021333562 for DG2, MTL and ARL [guc]

  xe:
   - update MAINATINERS
   - New uapi adding OA functionality to Xe
   - expose l3 bank mask
   - fix display detect on ADL-N
   - runtime PM Fixes
   - Fix silent backmerge issues
   - More prep for SR-IOV
   - HWmon additions
   - per client usage info
   - Rework GPU page fault handling
   - Drop EXEC_QUEUE_FLAG_BANNED
   - Add BMG PCI IDs
   - Scheduler fixes and improvements
   - Rename xe_exec_queue::compute to xe_exec_queue::lr
   - Use ttm_uncached for BO with NEEDS_UC flag
   - Rename xe perf layer as xe observation layer
   - lots of refactoring

  radeon:
   - Backlight workaround for iMac
   - Silence UBSAN flex array warnings

  msm:
   - Validate registers XML description against schema in CI
   - core/dpu: SM7150 support
   - mdp5: Add support for MSM8937
   - gpu: Add param for userspace to know if raytracing is supported
   - gpu: X185 support (aka gpu in X1 laptop chips)
   - gpu: a505 support

  ivpu:
   - hardware scheduler support
   - profiling support
   - improvements to the platform support layer
   - firmware handling improvements
   - clocks/power mgmt improvements
   - scheduler/logging improvements

  habanalabs:
   - Gradual sleep in polling memory macro
   - Reduce Gaudi2 MSI-X interrupt count to 128
   - Add Gaudi2-D revision support
   - Add timestamp to CPLD info
   - Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
   - Align Gaudi2 interrupt names
   - Check for errors after preboot is ready
   - Change habanalabs maintainer and git repo path

  mgag200:
   - refactoring and improvements
   - Add BMC output
   - enable polling

  nouveau:
   - add registry command line

  v3d:
   - perf counters improvements

  zynqmp:
   - irq and debugfs improvements

  atmel-hlcdc:
   - Support XLCDC in sam9x7

  mipi-dbi:
   - Remove mipi_dbi_machine_little_endian
   - make SPI bits per word configurable
   - support RGB888
   - allow pixel formats to be specified in the DT

  sun4i:
   - Rework the blender setup for DE2

  panfrost:
   - Enable MT8188 support

  vc4:
   - Monochrome TV support

  exynos:
   - fix fallback mode regression
   - fix memory leak
   - Use drm_edid_duplicate() instead of kmemdup()

  etnaviv:
   - fix i.MX8MP NPU clock gating
   - workaround FE register cdc issues on some cores
   - fix DMA sync handling for cached buffers
   - fix job timeout handling
   - keep TS enabled on MMUv2 cores for improved performance

  mediatek:
   - Convert to platform remove callback returning void-
   - Drop chain_mode_fixup call in mode_valid()
   - Fixes the errors of MediaTek display driver found by IGT
   - Add display support for the MT8365-EVK board
   - Fix bit depth overwritten for mtk_ovl_set bit_depth()
   - Fix possible_crtcs calculation
   - Fix spurious kfree()

  ast:
   - refactor mode setting code

  stm:
   - Add LVDS support
   - DSI PHY updates"

* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
  drm/amdgpu/mes12: add missing opcode string
  drm/amdgpu/mes11: update opcode strings
  Revert "drm/amd/display: Reset freesync config before update new state"
  drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
  drm/xe: Drop trace_xe_hw_fence_free
  drm/xe/uapi: Rename xe perf layer as xe observation layer
  drm/amdgpu: remove exp hw support check for gfx12
  drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
  drm/amdgpu: flush all cached ras bad pages to eeprom
  drm/amdgpu: select compute ME engines dynamically
  drm/amd/display: Allow display DCC for DCN401
  drm/amdgpu: select compute ME engines dynamically
  drm/amdgpu/job: Replace DRM_INFO/ERROR logging
  drm/amdgpu: select compute ME engines dynamically
  drm/amd/pm: Ignore initial value in smu response register
  drm/amdgpu: Initialize VF partition mode
  drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
  MAINTAINERS: fix Xinhui's name
  MAINTAINERS: update powerplay and swsmu
  drm/qxl: Pin buffer objects for internal mappings
  ...
drm/bridge: adv7511: Fix Intermittent EDID failures 2024-07-08T13:03:11+00:00 Adam Ford aford173@gmail.com 2024-06-30T22:19:31+00:00 91f9f4a37124044089debb02a3965c59b5b10c21 In the process of adding support for shared IRQ pins, a scenario was accidentally created where adv7511_irq_process returned prematurely causing the EDID to fail randomly. Since the interrupt handler is broken up into two main helper functions, update both of them to treat the helper functions as IRQ handlers. These IRQ routines process their respective tasks as before, but if they determine that actual work was done, mark the respective IRQ status accordingly, and delay the check until everything has been processed. This should guarantee the helper functions don't return prematurely while still returning proper values of either IRQ_HANDLED or IRQ_NONE. Reported-by: Liu Ying <victor.liu@nxp.com> Fixes: f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins") Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Liu Ying <victor.liu@nxp.com> # i.MX8MP EVK ADV7535 EDID retrieval w/o IRQ Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240630221931.1650565-1-aford173@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> V3: Remove unnecessary declaration of ret by evaluating the return code of regmap_read directly. V2: Fix uninitialized cec_status Cut back a little on error handling to return either IRQ_NONE or IRQ_HANDLED. 
In the process of adding support for shared IRQ pins, a scenario
was accidentally created where adv7511_irq_process returned
prematurely causing the EDID to fail randomly.

Since the interrupt handler is broken up into two main helper functions,
update both of them to treat the helper functions as IRQ handlers. These
IRQ routines process their respective tasks as before, but if they
determine that actual work was done, mark the respective IRQ status
accordingly, and delay the check until everything has been processed.

This should guarantee the helper functions don't return prematurely
while still returning proper values of either IRQ_HANDLED or IRQ_NONE.

Reported-by: Liu Ying <victor.liu@nxp.com>
Fixes: f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Liu Ying <victor.liu@nxp.com> # i.MX8MP EVK ADV7535 EDID retrieval w/o IRQ
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240630221931.1650565-1-aford173@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

V3:  Remove unnecessary declaration of ret by evaluating the return
     code of regmap_read directly.

V2:  Fix uninitialized cec_status
     Cut back a little on error handling to return either IRQ_NONE or
     IRQ_HANDLED.
Merge v6.10-rc6 into drm-next 2024-07-05T08:47:28+00:00 Daniel Vetter daniel.vetter@ffwll.ch 2024-07-05T08:35:14+00:00 86634fa4e6aeff2e190616c304156899beb4d76b The exynos-next pull is based on a newer -rc than drm-next. hence backmerge first to make sure the unrelated conflicts we accumulated don't end up randomly in the exynos merge pull, but are separated out. Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma code, and cherry-pick conflict in xe. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 
The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.

Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>