linux-stable.git/drivers/gpu/drm/ast, branch v3.15.2

drm/ast: fix value check in cbr_scan2

2014-04-18T03:18:01+00:00

this is a typo vs the ums driver, fix to check correct value.

Found initially by Coverity.

Reported-by: Daniel Vetter 
Signed-off-by: Dave Airlie

drm: Replace crtc fb with primary plane fb (v3)

2014-04-02T00:18:28+00:00

Now that CRTC's have a primary plane, there's no need to track the
framebuffer in the CRTC.  Replace all references to the CRTC fb with the
primary plane's fb.

This patch was generated by the Coccinelle semantic patching tool using
the following rules:

        @@ struct drm_crtc C; @@
        -   (C).fb
        +   C.primary->fb

        @@ struct drm_crtc *C; @@
        -   (C)->fb
        +   C->primary->fb

v3: Generate patch via coccinelle.  Actual removal of crtc->fb has been
    moved to a subsequent patch.

v2: Fixup several lingering crtc->fb instances that were missed in the
    first patch iteration.  [Rob Clark]

Signed-off-by: Matt Roper 
Reviewed-by: Rob Clark

drm: init TTM dev_mapping in ttm_bo_device_init()

2014-03-16T11:23:42+00:00

With dev->anon_inode we have a global address_space ready for operation
right from the beginning. Therefore, there is no need to do a delayed
setup with TTM. Instead, set dev_mapping during initialization in
ttm_bo_device_init() and remove any "if (dev_mapping)" conditions.

Cc: Dave Airlie 
Cc: Ben Skeggs 
Cc: Maarten Lankhorst 
Cc: Alex Deucher 
Cc: Thomas Hellstrom 
Signed-off-by: David Herrmann

drm: use anon-inode instead of relying on cdevs

2014-03-16T11:23:33+00:00

DRM drivers share a common address_space across all character-devices of a
single DRM device. This allows simple buffer eviction and mapping-control.
However, DRM core currently waits for the first ->open() on any char-dev
to mark the underlying inode as backing inode of the device. This delayed
initialization causes ugly conditions all over the place:
  if (dev->dev_mapping)
    do_sth();

To avoid delayed initialization and to stop reusing the inode of the
char-dev, we allocate an anonymous inode for each DRM device and reset
filp->f_mapping to it on ->open().

Signed-off-by: David Herrmann

drm/mgag200,ast,cirrus: fix regression with drm_can_sleep conversion

2014-02-06T01:39:03+00:00

I totally sign inverted my way out of this one.

Cc: stable@vger.kernel.org
Reported-by: "Sabrina Dubroca" 
Signed-off-by: Dave Airlie

drm: ast,cirrus,mgag200: use drm_can_sleep

2014-01-29T00:51:52+00:00

these 3 were checking in_interrupt but we have situations where
calling vunmap under this could cause a BUG to be hit in
smp_call_function_many. Use the drm_can_sleep macro instead,
which should stop this path from been taken in this case.

Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie

drivers: gpu: Mark functions as static in ast_ttm.c

2014-01-14T02:59:16+00:00

Mark functions ast_ttm_global_release(), ast_ttm_bo_is_ast_bo() and
ast_ttm_tt_create() as static in drm/ast/ast_ttm.c because they are not
used outside this file.

This eliminates the following warnings in drm/ast/ast_ttm.c:
drivers/gpu/drm/ast/ast_ttm.c:84:1: warning: no previous prototype for
‘ast_ttm_global_release’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_ttm.c:105:6: warning: no previous prototype for
‘ast_ttm_bo_is_ast_bo’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_ttm.c:211:16: warning: no previous prototype for
‘ast_ttm_tt_create’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria 
Reviewed-by: Josh Triplett 
Signed-off-by: Dave Airlie

drivers: gpu: Mark functions as static in ast_mode.c

2014-01-14T02:59:16+00:00

Mark functions ast_set_sync_reg(), ast_set_dac_reg(),
ast_set_start_address_crt1(), ast_crtc_init(), ast_encoder_init(),
ast_connector_init(), ast_cursor_init(), ast_cursor_fini(),
ast_show_cursor() and ast_hide_cursor() as static in drm/ast/ast_mode.c
because they are not used outside this file.

This eliminates the following warning in drm/ast/ast_mode.c:
drivers/gpu/drm/ast/ast_mode.c:407:6: warning: no previous prototype for
‘ast_set_sync_reg’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:418:6: warning: no previous prototype for
‘ast_set_dac_reg’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:430:6: warning: no previous prototype for
‘ast_set_start_address_crt1’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:626:5: warning: no previous prototype for
‘ast_crtc_init’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:713:5: warning: no previous prototype for
‘ast_encoder_init’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:780:5: warning: no previous prototype for
‘ast_connector_init’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:813:5: warning: no previous prototype for
‘ast_cursor_init’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:850:6: warning: no previous prototype for
‘ast_cursor_fini’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:968:6: warning: no previous prototype for
‘ast_show_cursor’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:979:6: warning: no previous prototype for
‘ast_hide_cursor’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria 
Reviewed-by: Josh Triplett 
Signed-off-by: Dave Airlie

drivers: gpu: Mark function as static and remove unused function in ast_main.c

2014-01-14T02:59:15+00:00

Mark function ast_bo_unref() as static because it is not used outside
file ast_main.c and remove unused function ast_get_max_dclk() in
ast_main.c.

This eliminates the following warning in drm/ast/ast_main.c:
drivers/gpu/drm/ast/ast_main.c:192:10: warning: no previous prototype
for ‘ast_get_max_dclk’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_main.c:452:6: warning: no previous prototype for
‘ast_bo_unref’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria 
Reviewed-by: Josh Triplett 
Signed-off-by: Dave Airlie

drm: Add separate Kconfig option for fbdev helpers

2013-10-11T21:36:58+00:00

For drivers which might want to disable fbdev legacy support.

Select the new option in all drivers for now, so this shouldn't result
in any change. Drivers need some work anyway to make fbdev support
optional (if they have it implemented, that is), so the recommended
way to expose this is by adding per-driver options. At least as long
as most drivers don't support disabling the fbdev support.

v2: Update for new drm drivers msm and rcar-du. Note that Rob's msm
driver can already take advantage of this, which allows us to build
msm without any fbdev depencies in the kernel!

v3: Move the MODULE_* stuff from the fbdev helper file to
drm_crtc_helper.c.

Cc: David Herrmann 
Cc: Rob Clark 
Reviewed-by: Rob Clark 
Acked-by: Dave Airlie 
Reviewed-by: Chon Ming Lee 
Signed-off-by: Daniel Vetter