Pull drm updates from Dave Airlie:
 "Highlights:

   - AMD KFD driver merge

     This is the AMD HSA interface for exposing a lowlevel interface for
     GPGPU use.  They have an open source userspace built on top of this
     interface, and the code looks as good as it was going to get out of
     tree.

   - Initial atomic modesetting work

     The need for an atomic modesetting interface to allow userspace to
     try and send a complete set of modesetting state to the driver has
     arisen, and been suffering from neglect this past year.  No more,
     the start of the common code and changes for msm driver to use it
     are in this tree.  Ongoing work to get the userspace ioctl finished
     and the code clean will probably wait until next kernel.

   - DisplayID 1.3 and tiled monitor exposed to userspace.

     Tiled monitor property is now exposed for userspace to make use of.

   - Rockchip drm driver merged.

   - imx gpu driver moved out of staging

  Other stuff:

   - core:
        panel - MIPI DSI + new panels.
        expose suggested x/y properties for virtual GPUs

   - i915:
        Initial Skylake (SKL) support
        gen3/4 reset work
        start of dri1/ums removal
        infoframe tracking
        fixes for lots of things.

   - nouveau:
        tegra k1 voltage support
        GM204 modesetting support
        GT21x memory reclocking work

   - radeon:
        CI dpm fixes
        GPUVM improvements
        Initial DPM fan control

   - rcar-du:
        HDMI support added
        removed some support for old boards
        slave encoder driver for Analog Devices adv7511

   - exynos:
        Exynos4415 SoC support

   - msm:
        a4xx gpu support
        atomic helper conversion

   - tegra:
        iommu support
        universal plane support
        ganged-mode DSI support

   - sti:
        HDMI i2c improvements

   - vmwgfx:
        some late fixes.

   - qxl:
        use suggested x/y properties"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits)
  drm: sti: fix module compilation issue
  drm/i915: save/restore GMBUS freq across suspend/resume on gen4
  drm: sti: correctly cleanup CRTC and planes
  drm: sti: add HQVDP plane
  drm: sti: add cursor plane
  drm: sti: enable auxiliary CRTC
  drm: sti: fix delay in VTG programming
  drm: sti: prepare sti_tvout to support auxiliary crtc
  drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}
  drm: sti: fix hdmi avi infoframe
  drm: sti: remove event lock while disabling vblank
  drm: sti: simplify gdp code
  drm: sti: clear all mixer control
  drm: sti: remove gpio for HDMI hot plug detection
  drm: sti: allow to change hdmi ddc i2c adapter
  drm/doc: Document drm_add_modes_noedid() usage
  drm/i915: Remove '& 0xffff' from the mask given to WA_REG()
  drm/i915: Invert the mask and val arguments in wa_add() and WA_REG()
  drm: Zero out DRM object memory upon cleanup
  drm/i915/bdw: Fix the write setting up the WIZ hashing mode
  ...

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

backmerge to get vmwgfx locking changes into next as the
conflict with per-plane locking.

Just a bit of OCD cleanup on headers - this function isn't the core
interface any more but just a helper for drivers who haven't yet
transitioned to universal planes. Put the declaration at the right
spot and sprinkle necessary #includes over all drivers.

Maybe this helps to encourage driver maintainers to do the switch.

v2: Fix #include ordering for tegra, reported by 0-day builder.

v3: Include required headers, reported by Thierry.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Remove all .owner fields from platform drivers

Three changes for the Armada DRM driver:
1. Add back the flags which tell the DRM core that we can do vblank.  This
   was removed in error during the recent restructuring, and came to light
   while trying textured Xv rendering.

2. Fixing a refcount leak with Xv overlay.

3. As per recent discussion, the drm_vblank_pre_modeset() calls can cause
   deadlock with other changes to generic code.  This change prevents those
   deadlocks by switching to the drm_crtc_vblank_*() calls instead.

* 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  drm/armada: convert to use vblank_on/off calls
  drm/armada: fix page_flip refcounting leak
  drm/armada: add IRQ support back

A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

A future commit changes the way various vblank calls behave, which
causes drivers to break.  Converting to use the drm_crtc_vblank_on/off
calls avoids this breakage.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>