linux-stable.git/drivers/gpu/drm/amd, branch v4.19.129 Linux kernel stable tree drm/amdgpu: Fix oops when pp_funcs is unset in ACPI event 2020-05-10T08:30:10+00:00 Aaron Ma aaron.ma@canonical.com 2020-04-03T14:34:19+00:00 74edc32fda52b684a9af99dd65aa7745a170a18d commit 5932d260a8d85a103bd6c504fbb85ff58b156bf9 upstream. On ARCTURUS and RENOIR, powerplay is not supported yet. When plug in or unplug power jack, ACPI event will issue. Then kernel NULL pointer BUG will be triggered. Check for NULL pointers before calling. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5932d260a8d85a103bd6c504fbb85ff58b156bf9 upstream.

On ARCTURUS and RENOIR, powerplay is not supported yet.
When plug in or unplug power jack, ACPI event will issue.
Then kernel NULL pointer BUG will be triggered.
Check for NULL pointers before calling.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/amdgpu: Correctly initialize thermal controller for GPUs with Powerplay table v0 (e.g Hawaii) 2020-05-10T08:30:07+00:00 Sandeep Raghuraman sandy.8925@gmail.com 2020-04-16T20:07:45+00:00 65d5ea5f20f76ecedcc470df45fe0d92146f8e8e [ Upstream commit bbc25dadc7ed19f9d6b2e30980f0eb4c741bb8bf ] Initialize thermal controller fields in the PowerPlay table for Hawaii GPUs, so that fan speeds are reported. Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit bbc25dadc7ed19f9d6b2e30980f0eb4c741bb8bf ]

Initialize thermal controller fields in the PowerPlay table for Hawaii
GPUs, so that fan speeds are reported.

Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/amd/display: Not doing optimize bandwidth if flip pending. 2020-04-29T14:31:15+00:00 Yongqiang Sun yongqiang.sun@amd.com 2020-03-09T21:13:02+00:00 de32c6ad7a4fcb986e0e4f39d7497948b734b8c7 [ Upstream commit 9941b8129030c9202aaf39114477a0e58c0d6ffc ] [Why] In some scenario like 1366x768 VSR enabled connected with a 4K monitor and playing 4K video in clone mode, underflow will be observed due to decrease dppclk when previouse surface scan isn't finished [How] In this use case, surface flip is switching between 4K and 1366x768, 1366x768 needs smaller dppclk, and when decrease the clk and previous surface scan is for 4K and scan isn't done, underflow will happen. Not doing optimize bandwidth in case of flip pending. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9941b8129030c9202aaf39114477a0e58c0d6ffc ]

[Why]
In some scenario like 1366x768 VSR enabled connected with a 4K monitor
and playing 4K video in clone mode, underflow will be observed due to
decrease dppclk when previouse surface scan isn't finished

[How]
In this use case, surface flip is switching between 4K and 1366x768,
1366x768 needs smaller dppclk, and when decrease the clk and previous
surface scan is for 4K and scan isn't done, underflow will happen.  Not
doing optimize bandwidth in case of flip pending.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/amdkfd: kfree the wrong pointer 2020-04-23T08:30:20+00:00 Jack Zhang Jack.Zhang1@amd.com 2020-04-01T12:06:58+00:00 044a884072b4313554d910b792f46c3e1f0099a5 [ Upstream commit 3148a6a0ef3cf93570f30a477292768f7eb5d3c3 ] Originally, it kfrees the wrong pointer for mem_obj. It would cause memory leak under stress test. Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3148a6a0ef3cf93570f30a477292768f7eb5d3c3 ]

Originally, it kfrees the wrong pointer for mem_obj.
It would cause memory leak under stress test.

Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/amd/powerplay: force the trim of the mclk dpm_levels if OD is enabled 2020-04-21T07:03:10+00:00 Sergei Lopatin magist3r@gmail.com 2019-06-26T09:56:59+00:00 9959d615b715972002ed1ec9961486ded26e2ef4 commit 8c7f0a44b4b4ef16df8f44fbaee6d1f5d1593c83 upstream. Should prevent flicker if PP_OVERDRIVE_MASK is set. bug: https://bugs.freedesktop.org/show_bug.cgi?id=102646 bug: https://bugs.freedesktop.org/show_bug.cgi?id=108941 bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1088 bug: https://gitlab.freedesktop.org/drm/amd/-/issues/628 Signed-off-by: Sergei Lopatin <magist3r@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8c7f0a44b4b4ef16df8f44fbaee6d1f5d1593c83 upstream.

Should prevent flicker if PP_OVERDRIVE_MASK is set.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=102646
bug: https://bugs.freedesktop.org/show_bug.cgi?id=108941
bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1088
bug: https://gitlab.freedesktop.org/drm/amd/-/issues/628

Signed-off-by: Sergei Lopatin <magist3r@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/amdgpu: fix typo for vcn1 idle check 2020-04-13T08:45:00+00:00 James Zhu James.Zhu@amd.com 2020-03-18T21:09:05+00:00 7b9d4492808eb3c3ba43f6391b138101a7e9e42e [ Upstream commit acfc62dc68770aa665cc606891f6df7d6d1e52c0 ] fix typo for vcn1 idle check Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit acfc62dc68770aa665cc606891f6df7d6d1e52c0 ]

fix typo for vcn1 idle check

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017 2020-04-13T08:44:59+00:00 Mario Kleiner mario.kleiner.de@gmail.com 2020-02-28T21:36:07+00:00 a9049fd69bc4fdcc48ec3a638f1f470938354984 [ Upstream commit dec9de2ada523b344eb2428abfedf9d6cd0a0029 ] This fixes a problem found on the MacBookPro 2017 Retina panel: The panel reports 10 bpc color depth in its EDID, and the firmware chooses link settings at boot which support enough bandwidth for 10 bpc (324000 kbit/sec aka LINK_RATE_RBR2 aka 0xc), but the DP_MAX_LINK_RATE dpcd register only reports 2.7 Gbps (multiplier value 0xa) as possible, in direct contradiction of what the firmware successfully set up. This restricts the panel to 8 bpc, not providing the full color depth of the panel on Linux <= 5.5. Additionally, commit '4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' introduced into Linux 5.6-rc1 will unclamp panel depth to its full 10 bpc, thereby requiring a eDP bandwidth for all modes that exceeds the bandwidth available and causes all modes to fail validation -> No modes for the laptop panel -> failure to set any mode -> Panel goes dark. This patch adds a quirk specific to the MBP 2017 15" Retina panel to override reported max link rate to the correct maximum of 0xc = LINK_RATE_RBR2 to fix the darkness and reduced display precision. Please apply for Linux 5.6+ to avoid regressing Apple MBP panel support. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit dec9de2ada523b344eb2428abfedf9d6cd0a0029 ]

This fixes a problem found on the MacBookPro 2017 Retina panel:

The panel reports 10 bpc color depth in its EDID, and the
firmware chooses link settings at boot which support enough
bandwidth for 10 bpc (324000 kbit/sec aka LINK_RATE_RBR2
aka 0xc), but the DP_MAX_LINK_RATE dpcd register only reports
2.7 Gbps (multiplier value 0xa) as possible, in direct
contradiction of what the firmware successfully set up.

This restricts the panel to 8 bpc, not providing the full
color depth of the panel on Linux <= 5.5. Additionally, commit
'4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")'
introduced into Linux 5.6-rc1 will unclamp panel depth to
its full 10 bpc, thereby requiring a eDP bandwidth for all
modes that exceeds the bandwidth available and causes all modes
to fail validation -> No modes for the laptop panel -> failure
to set any mode -> Panel goes dark.

This patch adds a quirk specific to the MBP 2017 15" Retina
panel to override reported max link rate to the correct maximum
of 0xc = LINK_RATE_RBR2 to fix the darkness and reduced display
precision.

Please apply for Linux 5.6+ to avoid regressing Apple MBP panel
support.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/amd/amdgpu: Fix GPR read from debugfs (v2) 2020-03-25T07:06:12+00:00 Tom St Denis tom.stdenis@amd.com 2020-03-10T12:40:41+00:00 053a9862f0202cdcda9c56778dd98396a7cb3513 commit 5bbc6604a62814511c32f2e39bc9ffb2c1b92cbe upstream. The offset into the array was specified in bytes but should be in terms of 32-bit words. Also prevent large reads that would also cause a buffer overread. v2: Read from correct offset from internal storage buffer. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5bbc6604a62814511c32f2e39bc9ffb2c1b92cbe upstream.

The offset into the array was specified in bytes but should
be in terms of 32-bit words.  Also prevent large reads that
would also cause a buffer overread.

v2:  Read from correct offset from internal storage buffer.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/amd/display: fix dcc swath size calculations on dcn1 2020-03-25T07:06:08+00:00 Josip Pavic Josip.Pavic@amd.com 2020-02-21T17:26:19+00:00 345acf45a0cef1effd58d42ed8e767a6219ae4b6 [ Upstream commit a0275dfc82c9034eefbeffd556cca6dd239d7925 ] [Why] Swath sizes are being calculated incorrectly. The horizontal swath size should be the product of block height, viewport width, and bytes per element, but the calculation uses viewport height instead of width. The vertical swath size is similarly incorrectly calculated. The effect of this is that we report the wrong DCC caps. [How] Use viewport width in the horizontal swath size calculation and viewport height in the vertical swath size calculation. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a0275dfc82c9034eefbeffd556cca6dd239d7925 ]

[Why]
Swath sizes are being calculated incorrectly. The horizontal swath size
should be the product of block height, viewport width, and bytes per
element, but the calculation uses viewport height instead of width. The
vertical swath size is similarly incorrectly calculated. The effect of
this is that we report the wrong DCC caps.

[How]
Use viewport width in the horizontal swath size calculation and viewport
height in the vertical swath size calculation.

Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/amd/display: Clear link settings on MST disable connector 2020-03-25T07:06:07+00:00 Bhawanpreet Lakha Bhawanpreet.Lakha@amd.com 2020-02-20T16:16:14+00:00 f258014432a705707d78ccbcc24ff0df815eb983 [ Upstream commit 5ac7fd2f597b88ee81f4748ee50cab06192a8dc3 ] [Why] If we have a single MST display and we disconnect it, we dont disable that link. This causes the old link settings to still exist Now on a replug for MST we think its a link loss and will try to reallocate mst payload which will fail, throwing warning below. [ 129.374192] [drm] Failed to updateMST allocation table forpipe idx:0 [ 129.374206] ------------[ cut here ]------------ [ 129.374284] WARNING: CPU: 14 PID: 1710 at drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc_link.c:3153 dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374285] Modules linked in: amdgpu(OE) amd_iommu_v2 gpu_sched ttm drm_kms_helper drm fb_sys_fops syscopyarea sysfillrect sysimgblt binfmt_misc nls_iso8859_1 edac_mce_amd snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio kvm snd_hda_codec_hdmi snd_hda_intel snd_intel_nhlt snd_hda_codec irqbypass snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul snd_seq crc32_pclmul ghash_clmulni_intel snd_seq_device snd_timer snd aesni_intel eeepc_wmi crypto_simd asus_wmi joydev cryptd sparse_keymap input_leds soundcore video glue_helper wmi_bmof mxm_wmi k10temp ccp mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid igb i2c_algo_bit ahci dca i2c_piix4 libahci gpio_amdpt wmi gpio_generic [ 129.374318] CPU: 14 PID: 1710 Comm: kworker/14:2 Tainted: G W OE 5.4.0-rc7bhawan+ #480 [ 129.374318] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 0515 03/30/2017 [ 129.374397] Workqueue: events dm_irq_work_func [amdgpu] [ 129.374468] RIP: 0010:dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374470] Code: 52 20 e8 1c 63 ad f4 48 8b 5d d0 65 48 33 1c 25 28 00 00 00 b8 01 00 00 00 75 16 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b e9 fa fe ff ff e8 ed 5b d6 f3 41 0f b6 b6 c4 02 00 00 48 c7 [ 129.374471] RSP: 0018:ffff9f9141e7fcc0 EFLAGS: 00010246 [ 129.374472] RAX: 0000000000000000 RBX: ffff91ef0762f800 RCX: 0000000000000000 [ 129.374473] RDX: 0000000000000005 RSI: ffffffffc0c4a988 RDI: 0000000000000004 [ 129.374474] RBP: ffff9f9141e7fd10 R08: 0000000000000005 R09: 0000000000000000 [ 129.374475] R10: 0000000000000002 R11: 0000000000000001 R12: ffff91eebd510c00 [ 129.374475] R13: ffff91eebd510e58 R14: ffff91ef052c01b8 R15: 0000000000000006 [ 129.374476] FS: 0000000000000000(0000) GS:ffff91ef0ef80000(0000) knlGS:0000000000000000 [ 129.374477] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 129.374478] CR2: 000055623ea01d50 CR3: 0000000408a8c000 CR4: 00000000003406e0 [ 129.374479] Call Trace: [ 129.374550] dc_link_reallocate_mst_payload+0x12e/0x150 [amdgpu] [ 129.374617] dc_link_handle_hpd_rx_irq+0x6d4/0x6e0 [amdgpu] [ 129.374693] handle_hpd_rx_irq+0x77/0x310 [amdgpu] [ 129.374768] dm_irq_work_func+0x53/0x70 [amdgpu] [ 129.374774] process_one_work+0x1fd/0x3f0 [ 129.374776] worker_thread+0x255/0x410 [ 129.374778] kthread+0x121/0x140 [ 129.374780] ? process_one_work+0x3f0/0x3f0 [ 129.374781] ? kthread_park+0x90/0x90 [ 129.374785] ret_from_fork+0x22/0x40 [How] when we disable MST we should clear the cur link settings (lane_count=0 is good enough). This will cause us to not reallocate payloads earlier than expected and not throw the warning Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5ac7fd2f597b88ee81f4748ee50cab06192a8dc3 ]

[Why]
If we have a single MST display and we disconnect it, we dont disable that
link. This causes the old link settings to still exist

Now on a replug for MST we think its a link loss and will try to reallocate
mst payload which will fail, throwing warning below.

[  129.374192] [drm] Failed to updateMST allocation table forpipe idx:0
[  129.374206] ------------[ cut here ]------------
[  129.374284] WARNING: CPU: 14 PID: 1710 at
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc_link.c:3153
dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu]

[  129.374285] Modules linked in: amdgpu(OE) amd_iommu_v2 gpu_sched ttm
drm_kms_helper drm fb_sys_fops syscopyarea sysfillrect sysimgblt
binfmt_misc nls_iso8859_1 edac_mce_amd snd_hda_codec_realtek
snd_hda_codec_generic ledtrig_audio kvm snd_hda_codec_hdmi snd_hda_intel
snd_intel_nhlt snd_hda_codec irqbypass snd_hda_core snd_hwdep snd_pcm
snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul snd_seq
crc32_pclmul ghash_clmulni_intel snd_seq_device snd_timer snd aesni_intel
eeepc_wmi crypto_simd asus_wmi joydev cryptd sparse_keymap input_leds
soundcore video glue_helper wmi_bmof mxm_wmi k10temp ccp mac_hid
sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4
hid_generic usbhid hid igb i2c_algo_bit ahci dca i2c_piix4 libahci
gpio_amdpt wmi gpio_generic

[  129.374318] CPU: 14 PID: 1710 Comm: kworker/14:2 Tainted: G        W  OE     5.4.0-rc7bhawan+ #480
[  129.374318] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 0515 03/30/2017
[  129.374397] Workqueue: events dm_irq_work_func [amdgpu]
[  129.374468] RIP: 0010:dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu]
[  129.374470] Code: 52 20 e8 1c 63 ad f4 48 8b 5d d0 65 48 33 1c 25 28 00
00 00 b8 01 00 00 00 75 16 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3
<0f> 0b e9 fa fe ff ff e8 ed 5b d6 f3 41 0f b6 b6 c4 02 00 00 48 c7
[  129.374471] RSP: 0018:ffff9f9141e7fcc0 EFLAGS: 00010246
[  129.374472] RAX: 0000000000000000 RBX: ffff91ef0762f800 RCX: 0000000000000000
[  129.374473] RDX: 0000000000000005 RSI: ffffffffc0c4a988 RDI: 0000000000000004
[  129.374474] RBP: ffff9f9141e7fd10 R08: 0000000000000005 R09: 0000000000000000
[  129.374475] R10: 0000000000000002 R11: 0000000000000001 R12: ffff91eebd510c00
[  129.374475] R13: ffff91eebd510e58 R14: ffff91ef052c01b8 R15: 0000000000000006
[  129.374476] FS:  0000000000000000(0000) GS:ffff91ef0ef80000(0000) knlGS:0000000000000000
[  129.374477] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  129.374478] CR2: 000055623ea01d50 CR3: 0000000408a8c000 CR4: 00000000003406e0
[  129.374479] Call Trace:
[  129.374550]  dc_link_reallocate_mst_payload+0x12e/0x150 [amdgpu]
[  129.374617]  dc_link_handle_hpd_rx_irq+0x6d4/0x6e0 [amdgpu]
[  129.374693]  handle_hpd_rx_irq+0x77/0x310 [amdgpu]
[  129.374768]  dm_irq_work_func+0x53/0x70 [amdgpu]
[  129.374774]  process_one_work+0x1fd/0x3f0
[  129.374776]  worker_thread+0x255/0x410
[  129.374778]  kthread+0x121/0x140
[  129.374780]  ? process_one_work+0x3f0/0x3f0
[  129.374781]  ? kthread_park+0x90/0x90
[  129.374785]  ret_from_fork+0x22/0x40

[How]
when we disable MST we should clear the cur link settings (lane_count=0 is
good enough). This will cause us to not reallocate payloads earlier than
expected and not throw the warning

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>