linux-stable.git/drivers/gpu/drm/amd/display, branch v6.1.35

drm/amdgpu: Don't set struct drm_driver.output_poll_changed

2023-06-21T14:01:02+00:00

commit 0e3172bac3f43759719384403fe2d1e4c61f87e0 upstream.

Don't set struct drm_driver.output_poll_changed. It's used to restore
the fbdev console. But as amdgpu uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See the
functions drm_kms_helper_hotplug_event() and
drm_kms_helper_connector_hotplug_event() in drm_probe_helper.c.

v2:
	* fix commit description (Christian)

Signed-off-by: Thomas Zimmermann 
Reviewed-by: Javier Martinez Canillas 
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-5-tzimmermann@suse.de
Cc: "Gagniuc, Alexandru" 
Signed-off-by: Greg Kroah-Hartman

drm/amd/display: edp do not add non-edid timings

2023-06-21T14:00:56+00:00

commit e749dd10e5f292061ad63d2b030194bf7d7d452c upstream.

[Why] most edp support only timings from edid. applying
non-edid timings, especially those timings out of edp
bandwidth, may damage edp.

[How] do not add non-edid timings for edp.

Cc: Mario Limonciello 
Cc: Alex Deucher 
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang 
Signed-off-by: Hersen Wu 
Reviewed-by: Roman Li 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Reduce sdp bw after urgent to 90%

2023-06-14T09:15:26+00:00

commit e1a600208286c197c2696e51fc313e49889315bd upstream.

[Description]
Reduce expected SDP bandwidth due to poor QoS and
arbitration issues on high bandwidth configs

Cc: Mario Limonciello 
Cc: Alex Deucher 
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang 
Signed-off-by: Alvin Lee 
Reviewed-by: Nevenko Stupar 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Have Payload Properly Created After Resume

2023-06-09T08:34:28+00:00

commit 482e6ad9adde69d9da08864b4ccf4dfd53edb2f0 upstream.

At drm suspend sequence, MST dc_sink is removed. When commit cached
MST stream back in drm resume sequence, the MST stream payload is not
properly created and added into the payload table. After resume, topology
change is reprobed by removing existing streams first. That leads to
no payload is found in the existing payload table as below error
"[drm] ERROR No payload for [MST PORT:] found in mst state"

1. In encoder .atomic_check routine, remove check existance of dc_sink
2. Bypass MST by checking existence of MST root port. dc_link_type cannot
differentiate MST port before topology is rediscovered.

Reviewed-by: Wayne Lin 
Acked-by: Tom Chung 
Signed-off-by: Fangzhi Zuo 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
[Adjusted for variables that were renamed between 6.1 and 6.3.]
Signed-off-by: Mario Limonciello 
Signed-off-by: Greg Kroah-Hartman

drm/amd/display: hpd rx irq not working with eDP interface

2023-05-30T13:03:17+00:00

commit eeefe7c4820b6baa0462a8b723ea0a3b5846ccae upstream.

[Why]
This is the fix for the defect of commit ab144f0b4ad6
("drm/amd/display: Allow individual control of eDP hotplug support").

[How]
To revise the default eDP hotplug setting and use the enum to git rid
of the magic number for different options.

Fixes: ab144f0b4ad6 ("drm/amd/display: Allow individual control of eDP hotplug support")
Cc: stable@vger.kernel.org
Cc: Mario Limonciello 
Reviewed-by: Wenjing Liu 
Acked-by: Qingqing Zhuo 
Signed-off-by: Robin Chen 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher 
(cherry picked from commit eeefe7c4820b6baa0462a8b723ea0a3b5846ccae)
Hand modified for missing file rename changes and symbol moves in 6.1.y.
Signed-off-by: Mario Limonciello 
Signed-off-by: Greg Kroah-Hartman

drm/amd: Fix an out of bounds error in BIOS parser

2023-05-24T16:32:36+00:00

[ Upstream commit d116db180decec1b21bba31d2ff495ac4d8e1b83 ]

The array is hardcoded to 8 in atomfirmware.h, but firmware provides
a bigger one sometimes. Deferencing the larger array causes an out
of bounds error.

commit 4fc1ba4aa589 ("drm/amd/display: fix array index out of bound error
in bios parser") fixed some of this, but there are two other cases
not covered by it.  Fix those as well.

Reported-by: erhard_f@mailbox.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214853
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2473
Signed-off-by: Mario Limonciello 
Reviewed-by: Harry Wentland 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/amd/display: Correct DML calculation to follow HW SPEC

2023-05-24T16:32:36+00:00

[ Upstream commit 385c3e4c29e1d4ce8f68687a8c84621e4c0e0416 ]

[Why]
In 2560x1600@240p eDP panel, driver use lowest voltage level
to play 1080p video cause underflow. According to HW SPEC,
the senario should use high voltage level.

[How]
ChromaPre value is zero when bandwidth validation.
Correct ChromaPre calculation.

Reviewed-by: Nicholas Kazlauskas 
Reviewed-by: Jun Lei 
Acked-by: Qingqing Zhuo 
Signed-off-by: Paul Hsieh 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/amd/display: fixed dcn30+ underflow issue

2023-05-24T16:32:35+00:00

[ Upstream commit 37403ced9f2873fab7f39ab4ac963bbb33fb0bc0 ]

[Why]
Observing underflow on dcn30+ system config at 4k144hz

[How]
We set the UCLK hardmax on AC/DC switch if softmax is enabled
and also on boot. While booting up the UCLK Hardmax is set
to softmax before the init sequence and the init sequence
resets the hardmax to UCLK max which enables P-state switching.
Just added a conditional check to avoid setting hardmax on init.

Reviewed-by: Alvin Lee 
Reviewed-by: Martin Leung 
Acked-by: Qingqing Zhuo 
Signed-off-by: Ayush Gupta 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/amd/display: Use DC_LOG_DC in the trasform pixel function

2023-05-24T16:32:34+00:00

[ Upstream commit 7222f5841ff49709ca666b05ff336776e0664a20 ]

[Why & How]
DC now uses a new commit sequence which is more robust since it
addresses cases where we need to reorganize pipes based on planes and
other parameters. As a result, this new commit sequence reset the DC
state by cleaning plane states and re-creating them accordingly with the
need. For this reason, the dce_transform_set_pixel_storage_depth can be
invoked after a plane state is destroyed and before its re-creation. In
this situation and on DCE devices, DC will hit a condition that will
trigger a dmesg log that looks like this:

Console: switching to colour frame buffer device 240x67
------------[ cut here ]------------
[..]
Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 5603 07/28/2020
RIP: 0010:dce_transform_set_pixel_storage_depth+0x3f8/0x480 [amdgpu]
[..]
RSP: 0018:ffffc9000202b850 EFLAGS: 00010293
RAX: ffffffffa081d100 RBX: ffff888110790000 RCX: 000000000000000c
RDX: ffff888100bedbf8 RSI: 0000000000001a50 RDI: ffff88810463c900
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000007
R10: 0000000000000001 R11: 0000000000000f00 R12: ffff88810f500010
R13: ffff888100bedbf8 R14: ffff88810f515688 R15: 0000000000000000
FS:  00007ff0159249c0(0000) GS:ffff88840e940000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff01528e550 CR3: 0000000002a10000 CR4: 00000000003506e0
Call Trace:
 
 ? dm_write_reg_func+0x21/0x80 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
 dc_stream_set_dither_option+0xfb/0x130 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
 amdgpu_dm_crtc_configure_crc_source+0x10b/0x190 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
 amdgpu_dm_atomic_commit_tail+0x20a8/0x2a90 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
 ? free_unref_page_commit+0x98/0x170
 ? free_unref_page+0xcc/0x150
 commit_tail+0x94/0x120
 drm_atomic_helper_commit+0x10f/0x140
 drm_atomic_commit+0x94/0xc0
 ? drm_plane_get_damage_clips.cold+0x1c/0x1c
 drm_client_modeset_commit_atomic+0x203/0x250
 drm_client_modeset_commit_locked+0x56/0x150
 drm_client_modeset_commit+0x21/0x40
 drm_fb_helper_lastclose+0x42/0x70
 amdgpu_driver_lastclose_kms+0xa/0x10 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
 drm_release+0xda/0x110
 __fput+0x89/0x240
 task_work_run+0x5c/0x90
 do_exit+0x333/0xae0
 do_group_exit+0x2d/0x90
 __x64_sys_exit_group+0x14/0x20
 do_syscall_64+0x5b/0x80
 ? exit_to_user_mode_prepare+0x1e/0x140
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7ff016ceaca1
Code: Unable to access opcode bytes at RIP 0x7ff016ceac77.
RSP: 002b:00007ffe7a2357e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00007ff016e15a00 RCX: 00007ff016ceaca1
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffffffffff78 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ff016e15a00
R13: 0000000000000000 R14: 00007ff016e1aee8 R15: 00007ff016e1af00
 

Since this issue only happens in a transition state on DC, this commit
replace BREAK_TO_DEBUGGER with DC_LOG_DC.

Reviewed-by: Harry Wentland 
Acked-by: Qingqing Zhuo 
Signed-off-by: Rodrigo Siqueira 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/amd/display: Enable HostVM based on rIOMMU active

2023-05-24T16:32:34+00:00

[ Upstream commit 97fa4dfa66fdd52ad3d0c9fadeaaa1e87605bac7 ]

[Why]
There is underflow and flickering occuring. The
underflow stops when hostvm is forced to active.
According to policy, hostvm should be enabled if riommu
is active, but this is not taken into account when
deciding whether to enable hostvm.

[What]
For DCN314, set hostvm to true if riommu is active.

Reviewed-by: Nicholas Kazlauskas 
Acked-by: Qingqing Zhuo 
Signed-off-by: Gabe Teeger 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin