[ Upstream commit 06888d571b513cbfc0b41949948def6cb81021b2 ]

Instead of reading the desired 5 bytes of the actual target field,
the code was reading 8. This could result in a corrupted value if the
trailing 3 bytes were non-zero, so instead use an appropriately sized
and zero-initialized bounce buffer, and read only 5 bytes before casting
to u64.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 99c248c41c2199bd34232ce8e729d18c4b343b64 ]

[why]
When setup is called after hdcp has already setup,
it would cause to disable HDCP flow won’t execute.

[how]
Don't clean up hdcp content to be 0.

Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Wayne Lin <waynelin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4ccf9446b2a3615615045346c97f8a1e2a16568a ]

[why]
the current implementation of hdcp2 rx id list validation does not
have handler/checker for invalid message status, e.g. HMAC, the V
parameter calculated from PSP not matching the V prime from Rx.

[how]
return a generic FAILURE for any message status not SUCCESS or
REVOKED.

Signed-off-by: Dingchen (David) Zhang <dingchen.zhang@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[Why]
Current implementation of mod_hdcp_hdcp2_validate_ake_cert()
does not process HDCP status message
TA_HDCP2_MSG_AUTHENTICATION_STATUS__SIGNATURE_CERTIFICAT_ERROR.
As a result, when there is a signature certificate error,
mod_hdcp_hdcp2_validate_ake_cert would return the default status,
which is success.

[How]
For all messages other than TA_HDCP2_MSG_AUTHENTICATION_STATUS__SUCCESS
and TA_HDCP2_MSG_AUTHENTICATION_STATUS__RECEIVERID_REVOKED, return status
as failure.

Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
The PWL backlight curve is used by the firmware to convert between
brightness and linear PWM value.
Driver has a backlight LUT, but the firmware holds a PWL curve and
interpolates between points.

The calculations are incorrect leading to slightly off backlight values
being programmed.

[How]
Fix the PWL backlight curve threshold/offset calculations

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
In HDCP update stream config interface, some variables are named as
xxx_supported, but in fact the variable indicates whether or not xxx_enabled.
Correct the naming so it is less confusing to read the code.

Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Change the license of color_table.c to match color_table.h granting
permission to modify and distribute.

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/modules/info_packet/info_packet.c:412: warning: Cannot understand  *****************************************************************************

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/modules/power/power_helpers.c:281:6: warning: no previous prototype for ‘fill_iram_v_2’ [-Wmissing-prototypes]
 drivers/gpu/drm/amd/amdgpu/../display/modules/power/power_helpers.c:455:6: warning: no previous prototype for ‘fill_iram_v_2_2’ [-Wmissing-prototypes]
 drivers/gpu/drm/amd/amdgpu/../display/modules/power/power_helpers.c:601:6: warning: no previous prototype for ‘fill_iram_v_2_3’ [-Wmissing-prototypes]

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Need driver to pass values of backlight ramp start and ramp reduction so
that intensity can be ramped down appropriately.

[How]
Using abm_parameters structure to get these values from driver.

Signed-off-by: Rizvi <syerizvi@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>