linux-stable.git/drivers/gpu/drm/amd/display/modules/inc, branch v5.8 Linux kernel stable tree drm/amd/display: Change infopacket type programming 2020-04-22T22:11:47+00:00 Haiyi Zhou haiyi.zhou@amd.com 2020-04-03T14:00:58+00:00 d2bacc38f6caa96e6d67d2e3e2bd0aee36de6954 [Why] Certain displays may experience blanking if infopacket max range does not equal nominal refresh rate. [How] Add additional infopacket versions to program range to full or forced range in freesync states. This does not change the vrr logic. Signed-off-by: Haiyi Zhou <haiyi.zhou@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
Certain displays may experience blanking if infopacket max range does
not equal nominal refresh rate.

[How]
Add additional infopacket versions to program range to full or forced
range in freesync states.
This does not change the vrr logic.

Signed-off-by: Haiyi Zhou <haiyi.zhou@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: fix typo 2020-04-09T14:43:16+00:00 Joseph Gravenor joseph.gravenor@amd.com 2020-04-05T20:40:50+00:00 49c4a8b6d93b533e266cb9f76eae4067592e077e [why] MOD_HDCP_STATUS_HDCP1_ENABLE_ENCRYPTION and MOD_HDCP_STATUS_HDCP2_ENABLE_ENCRYPTION were supposed to be MOD_HDCP_STATUS_HDCP1_ENABLE_ENCRYPTION_FAILURE and MOD_HDCP_STATUS_HDCP2_ENABLE_ENCRYPTION_FAILURE. Because of this it always seems like mod_hdcp_hdcp1_enable_encryption and mod_hdcp_hdcp2_enable_encryption are always passing [how] rename the elements to what they were supposed to be called Signed-off-by: Joseph Gravenor <joseph.gravenor@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why]
MOD_HDCP_STATUS_HDCP1_ENABLE_ENCRYPTION and
MOD_HDCP_STATUS_HDCP2_ENABLE_ENCRYPTION were supposed to be
MOD_HDCP_STATUS_HDCP1_ENABLE_ENCRYPTION_FAILURE and
MOD_HDCP_STATUS_HDCP2_ENABLE_ENCRYPTION_FAILURE. Because of this
it always seems like mod_hdcp_hdcp1_enable_encryption
and mod_hdcp_hdcp2_enable_encryption are always passing

[how]
rename the elements to what they were supposed to be called

Signed-off-by: Joseph Gravenor <joseph.gravenor@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Remove hdcp display state with mst fix 2020-04-09T14:43:16+00:00 Isabel Zhang isabel.zhang@amd.com 2020-04-05T20:40:44+00:00 2deade5ede56581722c0d7672f28b09548dc0fc4 [Why] Due to previous code changes, displays transition from active to active and added state immediately, making it redundant to have both display states. Previous change to fix this caused HDCP to get into a bad state when monitor is connected to MST hub, this change fixes that issue. [How] Change code behavior so when a device is added successfully the state remains as active and when addition is unsuccessful change state to inactive. This removes need for added and active state. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
Due to previous code changes, displays transition from active to active
and added state immediately, making it redundant to have both display
states. Previous change to fix this caused HDCP to get into a bad state
when monitor is connected to MST hub, this change fixes that issue.

[How]
Change code behavior so when a device is added successfully the state
remains as active and when addition is unsuccessful change state to
inactive. This removes need for added and active state.

Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Revert change to HDCP display states 2020-03-31T16:26:14+00:00 Isabel Zhang isabel.zhang@amd.com 2020-03-11T19:59:41+00:00 58edb079102efa2b4029e5fe3dbdad78079bf425 [Why] Change is causing a regression where the OPC app no longer functions properly. [How] Revert the changelist causing the issue. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
Change is causing a regression where the OPC app no longer functions
properly.

[How]
Revert the changelist causing the issue.

Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: differentiate vsc sdp colorimetry use criteria between MST and SST 2020-03-19T04:03:04+00:00 Martin Tsai martin.tsai@amd.com 2020-03-03T02:04:08+00:00 c38cc6770fd5f78a0918ed0b01af14de31aba5cb [Why] We should check MST BU support capability on output port before building vsc info packet. [How] Add a new definition for port and sink capability check. Signed-off-by: Martin Tsai <martin.tsai@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
We should check MST BU support capability on output port before building
vsc info packet.

[How]
Add a new definition for port and sink capability check.

Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Remove redundant hdcp display state 2020-03-19T04:03:04+00:00 Isabel Zhang isabel.zhang@amd.com 2020-02-27T16:19:13+00:00 b45f9a3ed41bdfac339c879732164e18c995c9a0 [Why] Due to previous code changes displays which are in active state immediately transition to the active and added state. This makes the two states redundant and unnecessary. [How] Instead of updating the device state to active and added after successful addition, change state to inactive if addition failed. Also, change references to active and added state to just added state. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
Due to previous code changes displays which are in active state
immediately transition to the active and added state. This makes the two
states redundant and unnecessary.

[How]
Instead of updating the device state to active and added after
successful addition, change state to inactive if addition failed. Also,
change references to active and added state to just added state.

Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: determine is mst hdcp based on stream instead of sink signal 2020-03-09T17:49:06+00:00 Wenjing Liu Wenjing.Liu@amd.com 2020-02-24T22:22:36+00:00 b6a1a0e76084c541382050606830580740ef9e84 [why] It is possible even if sink signal is MST but driver enables SST stream. We should not determine if we should do MST authentication based on sink's capability. Instead we should determine whether to do MST authentication based on what we have enabled in stream. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why]
It is possible even if sink signal is MST but driver enables SST stream.
We should not determine if we should do MST authentication based on
sink's capability.
Instead we should determine whether to do MST authentication based on
what we have enabled in stream.

Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Workaround to do HDCP authentication twice on certain displays 2020-03-05T05:30:04+00:00 George Shen george.shen@amd.com 2020-02-19T00:15:55+00:00 7bc3807fe1d0694caf59dec983ac5809441cc9ca [Why] When transitioning from SST to MST, the HDCP repeater in some MST displays will enter a bad state. The HDCP repeater is recovered after failing and performing authentication again. [How] Add monitor patch to trigger HDCP authentication failure after encryption is enabled and re-authenticate. Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
When transitioning from SST to MST, the HDCP repeater in some MST
displays will enter a bad state. The HDCP repeater is recovered after
failing and performing authentication again.

[How]
Add monitor patch to trigger HDCP authentication failure after
encryption is enabled and re-authenticate.

Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: no hdcp retry if bksv or ksv list is revoked 2020-02-12T21:01:38+00:00 Wenjing Liu Wenjing.Liu@amd.com 2019-10-17T15:13:29+00:00 3744ee2c2901656455bbd2af658ab9b673ca5d1d [why] According to the specs when bksv or ksv list fails SRM check, HDCP TX should abort hdcp immediately. However with the current code HDCP will be reattampt upto 4 times. [how] Add the logic that stop HDCP retry if bksv or ksv list is revoked. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why]
According to the specs when bksv or ksv list fails SRM check,
HDCP TX should abort hdcp immediately.
However with the current code HDCP will be reattampt upto 4 times.

[how]
Add the logic that stop HDCP retry if bksv or ksv list
is revoked.

Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Reinstate LFC optimization 2019-12-18T21:09:08+00:00 Amanda Liu amanda.liu@amd.com 2019-11-21T21:06:57+00:00 ded6119e825aaf0bfc7f2a578b549d610da852a7 [why] We want to streamline the calculations made when entering LFC. Previously, the optimizations led to screen tearing and were backed out to unblock development. [how] Integrate other calculations parameters, as well as screen tearing, fixes with the original LFC calculation optimizations. Signed-off-by: Amanda Liu <amanda.liu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why]
We want to streamline the calculations made when entering LFC.
Previously, the optimizations led to screen tearing and were backed out
to unblock development.

[how]
Integrate other calculations parameters, as well as screen tearing,
fixes with the original LFC calculation optimizations.

Signed-off-by: Amanda Liu <amanda.liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>