On some GPUs the VBIOS just doesn't have encoder caps,
or maybe not for every encoder.

This isn't really a problem and it's handled well,
so let's not litter the logs with it.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 33e0227ee96e62d034781e91f215e32fd0b1d512)

This reverts commits:
commit 1f26214d268b ("drm/amd/display: Add HPO encoder support to Replay")
commit 3bfce48b109f ("drm/amd/display: Add support for Panel Replay on DP1 eDP (panel_inst=1)")
due to visual confirm issue.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92f68f6a1b297633159a3f3759e4dfc7e5b58abb)

Fix the comment style before cntl_stuck_hw_workaround() by replacing
'/**' with '/*' since it is not a kdoc comment.

Fixes the below with gcc W=1:
display/dc/dce/dce_i2c_hw.c:380: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* If we boot without an HDMI display, the I2C engine does not get
  initialized

Fixes: 04d57f4462a6 ("drm/amd/display: Workaround for stuck I2C arbitrage")
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Dominik Kaszewski <dominik.kaszewski@amd.com>
Cc: Ivan Lipski <ivan.lipski@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why & how]
UHBR link rate capable eDPs will use HPO for encoding. Need to pass
HPO stream and link encoder instances to DMCUB for Replay FSM to
know which instances to use.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why & how]
DP1 eDP is still considered a single-eDP case and should support Panel Replay.
Modify secondary eDP policy to reflect this and update Replay state accordingly.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
When booting without an HDMI display connected, the I2C registers
are not initialized correctly, leading to DC_I2C_ARBITRATION register
getting stuck with DC_I2C_REG_RW_CNTL_STATUS == USED_BY_SW.

[How]
* Correct TOCTOU race condition in engine acquire logic which did not
check against DMUB trying to acquire it at the same time.
* Deassert SOFT_RESET before acquire, as it can block access to other
I2C registers.
* Add a workaround in release, checking that after triggerring
DC_I2C_SW_DONE_USING_I2C_REG, DC_I2C_REG_RW_CNTL_STATUS != USED_BY_SW.
If necessary, trigger DC_I2C_SW_DONE_USING_I2C_REG again.
* Remove unnecessary clear of DC_I2C_SW_USE_I2C_REG_REQ, which engine
ignores according to specification.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
For some pixel clock margin sensitive external monitor,
we could not keep original DP ref clock for the ASICs
supported SSC DP ref clock.

[How]
From slicon design team's comment,
we have to apply the adjusted DP ref clock for
DP devices.
DP 128b (DP2) signals uses the DTBCLK not DP ref.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

While not needed per speaking, all the other parameters have names but
this one.

Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
DCN4+ supports a new register based mailbox for sending messages
from host to DMCUB. This mailbox supports 64 byte commands, which makes
it compatible with the same structure as the frame buffer based mailbox.

[HOW]
The intention for reg_inbox0 is to be slot in replacement for the frame
buffer based mailbox (Inbox1). It supports all of the required features:
- Supports all messages handled by FB Inbox1
- Supports multi command batching

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Read the histogram for VariBright validation

[How]
Add dc/dmub functions to read histogram and ACE

Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Chun-Liang Chang <Chun-Liang.Chang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>