Pull drm updates from Dave Airlie:
 "This has two exciting community drivers for ARM Mali accelerators.
  Since ARM has never been open source friendly on the GPU side of the
  house, the community has had to create open source drivers for the
  Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx
  series. Well done to all involved and hopefully this will help ARM
  head in the right direction.

  There is also now the ability if you don't have any of the legacy
  drivers enabled (pre-KMS) to remove all the pre-KMS support code from
  the core drm, this saves 10% or so in codesize on my machine.

  i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo
  moves out of staging.

  There are also some rcar-du patches which crossover with media tree
  but all should be acked by Mauro.

  Summary:

  uapi changes:
   - Colorspace connector property
   - fourcc - new YUV formts
   - timeline sync objects initially merged
   - expose FB_DAMAGE_CLIPS to atomic userspace

  new drivers:
   - vboxvideo: moved out of staging
   - aspeed: ASPEED SoC BMC chip display support
   - lima: ARM Mali4xx GPU acceleration driver support
   - panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support

  core:
   - component helper docs
   - unplugging fixes
   - devm device init
   - MIPI/DSI rate control
   - shmem backed gem objects
   - connector, display_info, edid_quirks cleanups
   - dma_buf fence chain support
   - 64-bit dma-fence seqno comparison fixes
   - move initial fb config code to core
   - gem fence array helpers for Lima
   - ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size)
   - lease fixes

  ttm:
   - unified DRM_FILE_PAGE_OFFSET handling
   - Account for kernel allocations in kernel zone only

  panel:
   - OSD070T1718-19TS panel support
   - panel-tpo-td028ttec1 backlight support
   - Ronbo RB070D30 MIPI/DSI
   - Feiyang FY07024DI26A30-D MIPI-DSI panel
   - Rocktech jh057n00900 MIPI-DSI panel

  i915:
   - Comet Lake (Gen9) PCI IDs
   - Updated Icelake PCI IDs
   - Elkhartlake (Gen11) support
   - DP MST property addtions
   - plane and watermark fixes
   - Icelake port sync and VEBOX disable fixes
   - struct_mutex usage reduction
   - Icelake gamma fix
   - GuC reset fixes
   - make mmap more asynchronous
   - sound display power well race fixes
   - DDI/MIPI-DSI clocks for Icelake
   - Icelake RPS frequency changing support
   - Icelake workarounds

  amdgpu:
   - Use HMM for userptr
   - vega20 experimental smu11 support
   - RAS support for vega20
   - BACO support for vega12 + fixes for vega20
   - reworked IH interrupt handling
   - amdkfd RAS support
   - Freesync improvements
   - initial timeline sync object support
   - DC Z ordering fixes
   - NV12 planes support
   - colorspace properties for planes=
   - eDP opts if eDP already initialized

  nouveau:
   - misc fixes

  etnaviv:
   - misc fixes

  msm:
   - GPU zap shader support expansion
   - robustness ABI addition

  exynos:
   - Logging cleanups

  tegra:
   - Shared reset fix
   - CPU cache maintenance fix

  cirrus:
   - driver rewritten using simple helpers

  meson:
   - G12A support

  vmwgfx:
   - Resource dirtying management improvements
   - Userspace logging improvements

  virtio:
   - PRIME fixes

  rockchip:
   - rk3066 hdmi support

  sun4i:
   - DSI burst mode support

  vc4:
   - load tracker to detect underflow

  v3d:
   - v3d v4.2 support

  malidp:
   - initial Mali D71 support in komeda driver

  tfp410:
   - omap related improvement

  omapdrm:
   - drm bridge/panel support
   - drop some omap specific panels

  rcar-du:
   - Display writeback support"

* tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits)
  drm/msm/a6xx: No zap shader is not an error
  drm/cma-helper: Fix drm_gem_cma_free_object()
  drm: Fix timestamp docs for variable refresh properties.
  drm/komeda: Mark the local functions as static
  drm/komeda: Fixed warning: Function parameter or member not described
  drm/komeda: Expose bus_width to Komeda-CORE
  drm/komeda: Add sysfs attribute: core_id and config_id
  drm: add non-desktop quirk for Valve HMDs
  drm/panfrost: Show stored feature registers
  drm/panfrost: Don't scream about deferred probe
  drm/panfrost: Disable PM on probe failure
  drm/panfrost: Set DMA masks earlier
  drm/panfrost: Add sanity checks to submit IOCTL
  drm/etnaviv: initialize idle mask before querying the HW db
  drm: introduce a capability flag for syncobj timeline support
  drm: report consistent errors when checking syncobj capibility
  drm/nouveau/nouveau: forward error generated while resuming objects tree
  drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully"
  drm/nouveau/i2c: Disable i2c bus access after ->fini()
  drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition
  ...

[why]
When DMCU interrupts x86, it leads to undefined phy programming

[how]
expand dmcu interface to support new PHY lock and unlock commands
if DMCU FW doesn't support these commands, they fail silently so its okay

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Some DMCU messages were being sent in cases where
there was no DMCU FW at all, which resulted in some wait
timeouts

[How]
Delay sending some of the DMCU messages after FW
init is called and DMCU is running.

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Some LED Driver might not like Fractional PWM especially at extreme
ranges near 0% or 100%.
For example, backlight flashing could be observed.
We want a way to switch fractional PWM on/off either for debug, or
possibly production.

[How]
Add DC code that can send new FW command to enable/disable
fractional PWM.

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
AUX takes longer to reply when using active DP-DVI dongle on some asics
resulting in up to 2000+ us edid read (timeout).

[How]
1. Adjust AUX poll to match spec
2. Extend the SW timeout. This does not affect normal
operation since we exit the loop as soon as AUX acks.

Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Multiple threads were writing back to one global VBA in DC resulting
in multiple threads overwriting eachother's data

[How]
Add an instance of DML (which contains VBA) to each context and
change all calls that used dc->dml to use context->dml. Created a
seperate copy constructor for linux in a case where there is no
access to DC.

Signed-off-by: Aidan Wood <Aidan.Wood@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu:
- Switch to HMM for userptr (reverted until HMM fixes land)
- New experimental SMU 11 replacement for powerplay for vega20 (not enabled by default)
- Initial RAS support for vega20
- BACO support for vega12
- BACO fixes for vega20
- Rework IH handling for page fault and retry interrupts
- Cleanly split CPU and GPU paths for GPUVM updates
- Powerplay fixes
- XGMI fixes
- Rework how DC interacts with atomic for planes
- Clean up and simplify DC/Powerplay interfaces
- Misc cleanups and bug fixes

amdkfd:
- Switch to HMM for userptr (reverted until HMM fixes land)
- Add initial RAS support
- MQD fixes

ttm:
- Unify DRM_FILE_PAGE_OFFSET handling
- Account for kernel allocations in kernel zone only
- Misc cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190402170820.22197-1-alexander.deucher@amd.com

pass SDP splitting when setting stream attributes for future use

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Description]
when programming VID_TIMING, we were using the original VESA timing for DP_VIDM/N.
for YCbCr420 or compressed YCbCr422, using half rate as  YCbCr444.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

we were only checking the return value in one place, thus changing
generic_reg_wait from int to void and reading the register instead of
getting it from generic_reg_wait, when we need the return value.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>