linux-stable.git/drivers/gpu/drm/amd/display/amdgpu_dm, branch v6.8.2

drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini()

2024-03-26T22:17:05+00:00

[ Upstream commit 2a3cfb9a24a28da9cc13d2c525a76548865e182c ]

Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL
before the call to dc_enable_dmub_notifications(), check
beforehand to ensure there will not be a possible NULL-ptr-deref
there.

Also, since commit 1e88eb1b2c25 ("drm/amd/display: Drop
CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in
'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy().
Clean up by combining them all under one 'if'.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 81927e2808be ("drm/amd/display: Support for DMUB AUX")
Signed-off-by: Nikita Zhandarovich 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/amd/display: Fix a potential buffer overflow in 'dp_dsc_clock_en_read()'

2024-03-26T22:17:01+00:00

[ Upstream commit 4b09715f1504f1b6e8dff0e9643630610bc05141 ]

Tell snprintf() to store at most 10 bytes in the output buffer
instead of 30.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1508 dp_dsc_clock_en_read() error: snprintf() is printing too much 30 vs 10

Fixes: c06e09b76639 ("drm/amd/display: Add DSC parameters logging to debugfs")
Cc: Alex Hung 
Cc: Qingqing Zhuo 
Cc: Rodrigo Siqueira 
Cc: Aurabindo Pillai 
Cc: Alex Deucher 
Signed-off-by: Srinivasan Shanmugam 
Reviewed-by: Harry Wentland 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/amd/display: handle range offsets in VRR ranges

2024-03-06T20:44:18+00:00

Need to check the offset bits for values greater than 255.

v2: also update amdgpu_dm_connector values.

Suggested-by: Mano Ségransan 
Tested-by: Mano Ségransan 
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3203
Reviewed-by: Harry Wentland 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org

drm/amd/display: check dc_link before dereferencing

2024-03-06T20:44:18+00:00

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6683 amdgpu_dm_connector_funcs_force()
warn: variable dereferenced before check 'dc_link' (see line 6663)

Fixes: 967176179215 ("drm/amd/display: fix null-pointer dereference on edid reading")
Reported-by: Dan Carpenter 
Signed-off-by: Melissa Wen 
Signed-off-by: Alex Deucher

drm/amd/display: Add monitor patch for specific eDP

2024-02-28T22:33:05+00:00

[WHY]
Some eDP panels' ext caps don't write initial values. The value of
dpcd_addr (0x317) can be random and the backlight control interface
will be incorrect.

[HOW]
Add new panel patches to remove sink ext caps.

Cc: Mario Limonciello 
Cc: Alex Deucher 
Cc: stable@vger.kernel.org # 6.5.x
Cc: Tsung-hua Lin 
Cc: Chris Chi 
Reviewed-by: Wayne Lin 
Acked-by: Alex Hung 
Signed-off-by: Ryan Lin 
Signed-off-by: Alex Deucher

drm/amd/display: fix null-pointer dereference on edid reading

2024-02-22T17:27:30+00:00

Use i2c adapter when there isn't aux_mode in dc_link to fix a
null-pointer derefence that happens when running
igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector
detected as below:

[  +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0
[  +0.000010] #PF: supervisor read access in kernel mode
[  +0.000005] #PF: error_code(0x0000) - not-present page
[  +0.000004] PGD 0 P4D 0
[  +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152
[  +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021
[  +0.000004] RIP: 0010:i2c_transfer+0xd/0x100
[  +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16
[  +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246
[  +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080
[  +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0
[  +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980
[  +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080
[  +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f
[  +0.000004] FS:  00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000
[  +0.000003] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0
[  +0.000003] PKRU: 55555554
[  +0.000003] Call Trace:
[  +0.000006]  
[  +0.000006]  ? __die+0x23/0x70
[  +0.000011]  ? page_fault_oops+0x17d/0x4c0
[  +0.000008]  ? preempt_count_add+0x6e/0xa0
[  +0.000008]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000011]  ? exc_page_fault+0x7f/0x180
[  +0.000009]  ? asm_exc_page_fault+0x26/0x30
[  +0.000013]  ? i2c_transfer+0xd/0x100
[  +0.000010]  drm_do_probe_ddc_edid+0xc2/0x140 [drm]
[  +0.000067]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000006]  ? _drm_do_get_edid+0x97/0x3c0 [drm]
[  +0.000043]  ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[  +0.000042]  edid_block_read+0x3b/0xd0 [drm]
[  +0.000043]  _drm_do_get_edid+0xb6/0x3c0 [drm]
[  +0.000041]  ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[  +0.000043]  drm_edid_read_custom+0x37/0xd0 [drm]
[  +0.000044]  amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu]
[  +0.000153]  drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper]
[  +0.000000]  __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper]
[  +0.000000]  ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu]
[  +0.000000]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000000]  drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper]
[  +0.000000]  status_store+0xb2/0x1f0 [drm]
[  +0.000000]  kernfs_fop_write_iter+0x136/0x1d0
[  +0.000000]  vfs_write+0x24d/0x440
[  +0.000000]  ksys_write+0x6f/0xf0
[  +0.000000]  do_syscall_64+0x60/0xc0
[  +0.000000]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000000]  ? syscall_exit_to_user_mode+0x2b/0x40
[  +0.000000]  ? srso_alias_return_thunk+0x5/0x7f
[  +0.000000]  ? do_syscall_64+0x6c/0xc0
[  +0.000000]  ? do_syscall_64+0x6c/0xc0
[  +0.000000]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  +0.000000] RIP: 0033:0x7f9ad46b4b00
[  +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89
[  +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[  +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00
[  +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009
[  +0.000000] RBP: 0000000000000002 R08: 0000000000000064 R09: 0000000000000000
[  +0.000000] R10: 0000000000000000 R11: 0000000000000202 R12: 00007f9ad48a7417
[  +0.000000] R13: 0000000000000009 R14: 00007ffcbd3bd760 R15: 0000000000000001
[  +0.000000]  
[  +0.000000] Modules linked in: ctr ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel btmtk bluetooth uvcvideo videobuf2_vmalloc sha3_generic videobuf2_memops uvc jitterentropy_rng videobuf2_v4l2 videodev drbg videobuf2_common ansi_cprng mc ecdh_generic ecc qrtr binfmt_misc hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio snd_ctl_led joydev hid_sensor_iio_common rtw89_8852ae rtw89_8852a rtw89_pci snd_hda_codec_realtek rtw89_core snd_hda_codec_generic intel_rapl_msr ledtrig_audio intel_rapl_common snd_hda_codec_hdmi mac80211 snd_hda_intel snd_intel_dspcfg kvm_amd snd_hda_codec snd_soc_dmic snd_acp3x_rn snd_acp3x_pdm_dma libarc4 snd_hwdep snd_soc_core kvm snd_hda_core cfg80211 snd_pci_acp6x snd_pcm nls_ascii snd_timer hp_wmi snd_pci_acp5x nls_cp437 snd_rn_pci_acp3x ucsi_acpi sparse_keymap ccp snd platform_profile snd_acp_config typec_ucsi irqbypass vfat sp5100_tco
[  +0.000000]  snd_soc_acpi fat rapl pcspkr wmi_bmof roles rfkill rng_core snd_pci_acp3x soundcore k10temp watchdog typec battery ac amd_pmc acpi_tad button hid_sensor_hub hid_multitouch evdev serio_raw msr parport_pc ppdev lp parport fuse loop efi_pstore configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic dm_crypt dm_mod efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c crc32c_generic xor raid6_pq raid1 raid0 multipath linear md_mod amdgpu amdxcp i2c_algo_bit drm_ttm_helper ttm crc32_pclmul crc32c_intel drm_exec gpu_sched drm_suballoc_helper nvme ghash_clmulni_intel drm_buddy drm_display_helper sha512_ssse3 nvme_core ahci xhci_pci sha512_generic hid_generic xhci_hcd libahci rtsx_pci_sdmmc t10_pi i2c_hid_acpi drm_kms_helper i2c_hid mmc_core libata aesni_intel crc64_rocksoft_generic crypto_simd amd_sfh crc64_rocksoft scsi_mod usbcore cryptd crc_t10dif cec drm crct10dif_generic hid rtsx_pci crct10dif_pclmul scsi_common rc_core crc64 i2c_piix4
[  +0.000000]  usb_common crct10dif_common video wmi
[  +0.000000] CR2: 00000000000004c0
[  +0.000000] ---[ end trace 0000000000000000 ]---

Fixes: 0e859faf8670 ("drm/amd/display: Remove unwanted drm edid references")
Signed-off-by: Melissa Wen 
Signed-off-by: Alex Deucher

drm/amd/display: Fix memory leak in dm_sw_fini()

2024-02-22T17:26:59+00:00

After destroying dmub_srv, the memory associated with it is
not freed, causing a memory leak:

unreferenced object 0xffff896302b45800 (size 1024):
  comm "(udev-worker)", pid 222, jiffies 4294894636
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace (crc 6265fd77):
    [] kmalloc_trace+0x29d/0x340
    [] dm_dmub_sw_init+0xb4/0x450 [amdgpu]
    [] dm_sw_init+0x15/0x2b0 [amdgpu]
    [] amdgpu_device_init+0x1417/0x24e0 [amdgpu]
    [] amdgpu_driver_load_kms+0x15/0x190 [amdgpu]
    [] amdgpu_pci_probe+0x187/0x4e0 [amdgpu]
    [] local_pci_probe+0x3e/0x90
    [] pci_device_probe+0xc3/0x230
    [] really_probe+0xe2/0x480
    [] __driver_probe_device+0x78/0x160
    [] driver_probe_device+0x1f/0x90
    [] __driver_attach+0xce/0x1c0
    [] bus_for_each_dev+0x70/0xc0
    [] bus_add_driver+0x112/0x210
    [] driver_register+0x55/0x100
    [] do_one_initcall+0x41/0x300

Fix this by freeing dmub_srv after destroying it.

Fixes: 743b9786b14a ("drm/amd/display: Hook up the DMUB service in DM")
Signed-off-by: Armin Wolf 
Signed-off-by: Alex Deucher

drm/amd/display: adjust few initialization order in dm

2024-02-22T17:22:36+00:00

[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:

1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.

2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence

[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.

Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()

Cc: Stable 
Reviewed-by: Aurabindo Pillai 
Acked-by: Rodrigo Siqueira 
Tested-by: Daniel Wheeler 
Signed-off-by: Wayne Lin 
Signed-off-by: Alex Deucher

drm/amd/display: Preserve original aspect ratio in create stream

2024-02-15T19:18:43+00:00

[Why]
The original picture aspect ratio in mode struct may have chance be
overwritten with wrong aspect ratio data in create_stream_for_sink().
It will create a different VIC output and cause HDMI compliance test
failed.

[How]
Preserve the original picture aspect ratio data during create the
stream.

Cc: Mario Limonciello 
Cc: Alex Deucher 
Cc: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai 
Signed-off-by: Tom Chung 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher

drm/amd/display: Fix possible NULL dereference on device remove/driver unload

2024-02-15T19:18:43+00:00

As part of a cleanup amdgpu_dm_fini() function, which is typically
called when a device is being shut down or a driver is being unloaded

The below error message suggests that there is a potential null pointer
dereference issue with adev->dm.dc.

In the below, line of code where adev->dm.dc is used without a preceding
null check:

for (i = 0; i < adev->dm.dc->caps.max_links; i++) {

To fix this issue, add a null check for adev->dm.dc before this line.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:1959 amdgpu_dm_fini() error: we previously assumed 'adev->dm.dc' could be null (see line 1943)

Fixes: 006c26a0f1c8 ("drm/amd/display: Fix crash on device remove/driver unload")
Cc: Andrey Grodzovsky 
Cc: Harry Wentland 
Cc: Rodrigo Siqueira 
Cc: Aurabindo Pillai 
Signed-off-by: Srinivasan Shanmugam 
Reviewed-by: Roman Li 
Reviewed-by: Aurabindo Pillai 
Signed-off-by: Alex Deucher