linux-stable.git/drivers/gpu/drm/amd/display/amdgpu_dm, branch v6.3 Linux kernel stable tree drm/amdgpu: Fix desktop freezed after gpu-reset 2023-04-18T21:14:13+00:00 Alan Liu HaoPing.Liu@amd.com 2023-04-14T10:39:52+00:00 c8b5a95b570949536a2b75cd8fc4f1de0bc60629 [Why] After gpu-reset, sometimes the driver fails to enable vblank irq, causing flip_done timed out and the desktop freezed. During gpu-reset, we disable and enable vblank irq in dm_suspend() and dm_resume(). Later on in amdgpu_irq_gpu_reset_resume_helper(), we check irqs' refcount and decide to enable or disable the irqs again. However, we have 2 sets of API for controling vblank irq, one is dm_vblank_get/put() and another is amdgpu_irq_get/put(). Each API has its own refcount and flag to store the state of vblank irq, and they are not synchronized. In drm we use the first API to control vblank irq but in amdgpu_irq_gpu_reset_resume_helper() we use the second set of API. The failure happens when vblank irq was enabled by dm_vblank_get() before gpu-reset, we have vblank->enabled true. However, during gpu-reset, in amdgpu_irq_gpu_reset_resume_helper() vblank irq's state checked from amdgpu_irq_update() is DISABLED. So finally it disables vblank irq again. After gpu-reset, if there is a cursor plane commit, the driver will try to enable vblank irq by calling drm_vblank_enable(), but the vblank->enabled is still true, so it fails to turn on vblank irq and causes flip_done can't be completed in vblank irq handler and desktop become freezed. [How] Combining the 2 vblank control APIs by letting drm's API finally calls amdgpu_irq's API, so the irq's refcount and state of both APIs can be synchronized. Also add a check to prevent refcount from being less then 0 in amdgpu_irq_put(). v2: - Add warning in amdgpu_irq_enable() if the irq is already disabled. - Call dc_interrupt_set() in dm_set_vblank() to avoid refcount change if it is in gpu-reset. v3: - Improve commit message and code comments. Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 
[Why]
After gpu-reset, sometimes the driver fails to enable vblank irq,
causing flip_done timed out and the desktop freezed.

During gpu-reset, we disable and enable vblank irq in dm_suspend() and
dm_resume(). Later on in amdgpu_irq_gpu_reset_resume_helper(), we check
irqs' refcount and decide to enable or disable the irqs again.

However, we have 2 sets of API for controling vblank irq, one is
dm_vblank_get/put() and another is amdgpu_irq_get/put(). Each API has
its own refcount and flag to store the state of vblank irq, and they
are not synchronized.

In drm we use the first API to control vblank irq but in
amdgpu_irq_gpu_reset_resume_helper() we use the second set of API.

The failure happens when vblank irq was enabled by dm_vblank_get()
before gpu-reset, we have vblank->enabled true. However, during
gpu-reset, in amdgpu_irq_gpu_reset_resume_helper() vblank irq's state
checked from amdgpu_irq_update() is DISABLED. So finally it disables
vblank irq again. After gpu-reset, if there is a cursor plane commit,
the driver will try to enable vblank irq by calling drm_vblank_enable(),
but the vblank->enabled is still true, so it fails to turn on vblank
irq and causes flip_done can't be completed in vblank irq handler and
desktop become freezed.

[How]
Combining the 2 vblank control APIs by letting drm's API finally calls
amdgpu_irq's API, so the irq's refcount and state of both APIs can be
synchronized. Also add a check to prevent refcount from being less then
0 in amdgpu_irq_put().

v2:
- Add warning in amdgpu_irq_enable() if the irq is already disabled.
- Call dc_interrupt_set() in dm_set_vblank() to avoid refcount change
  if it is in gpu-reset.

v3:
- Improve commit message and code comments.

Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
drm/amd/display: Pass the right info to drm_dp_remove_payload 2023-04-12T20:11:17+00:00 Wayne Lin Wayne.Lin@amd.com 2023-02-17T05:26:56+00:00 b8ca445f550a9a079134f836466ddda3bfad6108 [Why & How] drm_dp_remove_payload() interface was changed. Correct amdgpu dm code to pass the right parameter to the drm helper function. Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why & How]
drm_dp_remove_payload() interface was changed. Correct amdgpu dm code
to pass the right parameter to the drm helper function.

Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Take FEC Overhead into Timeslot Calculation 2023-03-29T21:21:06+00:00 Fangzhi Zuo Jerry.Zuo@amd.com 2023-03-01T02:34:58+00:00 68dc1846c3a44d5e633be145c169ce2fd5420695 8b/10b encoding needs to add 3% fec overhead into the pbn. In the Synapcis Cascaded MST hub, the first stage MST branch device needs the information to determine the timeslot count for the second stage MST branch device. Missing this overhead will leads to insufficient timeslot allocation. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
8b/10b encoding needs to add 3% fec overhead into the pbn.
In the Synapcis Cascaded MST hub, the first stage MST branch device
needs the information to determine the timeslot count for the
second stage MST branch device. Missing this overhead will leads to
insufficient timeslot allocation.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add DSC Support for Synaptics Cascaded MST Hub 2023-03-29T21:21:05+00:00 Fangzhi Zuo Jerry.Zuo@amd.com 2023-02-24T18:45:21+00:00 f4f3b7dedbe849e780c779ba67365bb1db0d8637 Traditional synaptics hub has one MST branch device without virtual dpcd. Synaptics cascaded hub has two chained MST branch devices. DSC decoding is performed via root MST branch device, instead of the second MST branch device. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 
Traditional synaptics hub has one MST branch device without virtual dpcd.
Synaptics cascaded hub has two chained MST branch devices. DSC decoding
is performed via root MST branch device, instead of the second MST branch
device.

Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
drm/amd/display: remove outdated 8bpc comments 2023-03-23T13:34:07+00:00 Alex Hung alex.hung@amd.com 2023-03-06T03:39:51+00:00 6d457ca162da98a6a1a381320e936d7448177de9 [Why] The commit c76e483cd916 ("drm/amd/display: Don't restrict bpc to 8 bpc") removes the historical 8bpc dependency and sets max_bpc to 16. [How] The comment that states "8bpc for non-edp" needs to be removed as well. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
The commit c76e483cd916 ("drm/amd/display: Don't restrict bpc to 8 bpc")
removes the historical 8bpc dependency and sets max_bpc to 16.

[How]
The comment that states "8bpc for non-edp" needs to be removed as well.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Write to correct dirty_rect 2023-03-14T14:40:02+00:00 Benjamin Cheng ben@bcheng.me 2023-03-13T00:47:39+00:00 751281c55579f0cb0e56c9797d4663f689909681 When FB_DAMAGE_CLIPS are provided in a non-MPO scenario, the loop does not use the counter i. This causes the fill_dc_dity_rect() to always fill dirty_rects[0], causing graphical artifacts when a damage clip aware DRM client sends more than 1 damage clip. Instead, use the flip_addrs->dirty_rect_count which is incremented by fill_dc_dirty_rect() on a successful fill. Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2453 Signed-off-by: Benjamin Cheng <ben@bcheng.me> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x 
When FB_DAMAGE_CLIPS are provided in a non-MPO scenario, the loop does
not use the counter i. This causes the fill_dc_dity_rect() to always
fill dirty_rects[0], causing graphical artifacts when a damage clip
aware DRM client sends more than 1 damage clip.

Instead, use the flip_addrs->dirty_rect_count which is incremented by
fill_dc_dirty_rect() on a successful fill.

Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2453
Signed-off-by: Benjamin Cheng <ben@bcheng.me>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
drm/amd/display: Fix HDCP failing to enable after suspend 2023-03-14T14:37:48+00:00 Bhawanpreet Lakha Bhawanpreet.Lakha@amd.com 2023-02-17T21:08:21+00:00 728cefa53a36ba378ed4a7f31a0c08289687d824 [Why] On resume some displays are not ready for HDCP, so they will fail if we start the hdcp authentintication too soon. Add a delay so that the displays can be ready before we start. NOTE: Previoulsy this delay was set to 3 seconds but it was causing issues with compliance, 2 seconds should enough for compliance and the s3 resume case. [How] Change the Delay to 2 seconds. Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
On resume some displays are not ready for HDCP, so they will fail if we
start the hdcp authentintication too soon.

Add a delay so that the displays can be ready before we start.

NOTE: Previoulsy this delay was set to 3 seconds but it was causing
issues with compliance, 2 seconds should enough for compliance and the
s3 resume case.

[How]
Change the Delay to 2 seconds.

Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Extend Freesync over PCon support for more devices 2023-03-02T03:44:38+00:00 Sung Joon Kim sungjoon.kim@amd.com 2023-02-10T19:39:49+00:00 a8af68f79d149796609a679b00a34762249c6a5b [why] More branch devices are able to support Freesync over PCon so include them in the list of supporting devices. [how] Add more compatible PCon devices in the whitelist for Freesync over Pcon. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why]
More branch devices are able to support Freesync
over PCon so include them in the list of supporting devices.

[how]
Add more compatible PCon devices in the whitelist
for Freesync over Pcon.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Ext displays with dock can't recognized after resume 2023-03-02T03:42:53+00:00 Ryan Lin tsung-hua.lin@amd.com 2023-02-07T15:03:48+00:00 01a18aa309aec12461fb5e6aecb76f8b33810658 [Why] Needs to set the default value of the LTTPR timeout after resume. [How] Set the default (3.2ms) timeout at resuming if the sink supports LTTPR Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
Needs to set the default value of the LTTPR timeout after resume.

[How]
Set the default (3.2ms) timeout at resuming if the sink supports
LTTPR

Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: fix dm irq error message in gpu recover 2023-03-02T03:39:50+00:00 tiancyin tianci.yin@amd.com 2023-02-08T06:10:04+00:00 ca87c9ae70566c651dcf09c1b080db259e20f9ee [Why] Variable adev->crtc_irq.num_types was initialized as the value of adev->mode_info.num_crtc at early_init stage, later at hw_init stage, the num_crtc changed due to the display pipe harvest on some SKUs, but the num_types was not updated accordingly, that cause below error in gpu recover. *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 [How] Defer the initialization of num_types to eliminate the error logs. Signed-off-by: tiancyin <tianci.yin@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
Variable adev->crtc_irq.num_types was initialized as the value of
adev->mode_info.num_crtc at early_init stage, later at hw_init stage,
the num_crtc changed due to the display pipe harvest on some SKUs,
but the num_types was not updated accordingly, that cause below error
in gpu recover.

  *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3

[How]
Defer the initialization of num_types to eliminate the error logs.

Signed-off-by: tiancyin <tianci.yin@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>