linux-stable.git/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c, branch v5.4.232

drm/amd/display: add connector type check for CRC source set

2021-12-17T09:12:24+00:00

[ Upstream commit 2da34b7bb59e1caa9a336e0e20a76b8b6a4abea2 ]

[Why]
IGT bypass test will set crc source as DPRX,and display DM didn`t check
connection type, it run the test on the HDMI connector ,then the kernel
will be crashed because aux->transfer is set null for HDMI connection.
This patch will skip the invalid connection test and fix kernel crash issue.

[How]
Check the connector type while setting the pipe crc source as DPRX or
auto,if the type is not DP or eDP, the crtc crc source will not be set
and report error code to IGT test,IGT will show the this subtest as no
valid crtc/connector combinations found.

116.779714] [IGT] amd_bypass: starting subtest 8bpc-bypass-mode
[ 117.730996] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 117.731001] #PF: supervisor instruction fetch in kernel mode
[ 117.731003] #PF: error_code(0x0010) - not-present page
[ 117.731004] PGD 0 P4D 0
[ 117.731006] Oops: 0010 [#1] SMP NOPTI
[ 117.731009] CPU: 11 PID: 2428 Comm: amd_bypass Tainted: G OE 5.11.0-34-generic #36~20.04.1-Ubuntu
[ 117.731011] Hardware name: AMD CZN/, BIOS AB.FD 09/07/2021
[ 117.731012] RIP: 0010:0x0
[ 117.731015] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 117.731016] RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246
[ 117.731017] RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e
[ 117.731018] RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8
[ 117.731022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 117.731023] CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0
[ 117.731023] PKRU: 55555554
[ 117.731024] Call Trace:
[ 117.731027] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper]
[ 117.731036] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper]
[ 117.731040] drm_dp_start_crc+0x38/0xb0 [drm_kms_helper]
[ 117.731047] amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu]
[ 117.731149] crtc_crc_open+0x174/0x220 [drm]
[ 117.731162] full_proxy_open+0x168/0x1f0
[ 117.731165] ? open_proxy_open+0x100/0x100

BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1546
Reviewed-by: Harry Wentland 
Reviewed-by: Rodrigo Siqueira 
Signed-off-by: Perry Yuan 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/amd/display: Fix to be able to stop crc calculation

2021-01-27T10:47:45+00:00

[ Upstream commit 02ce73b01e09e388614b22b7ebc71debf4a588f0 ]

[Why]
Find out when we try to disable CRC calculation,
crc generation is still enabled. Main reason is
that dc_stream_configure_crc() will never get
called when the source is AMDGPU_DM_PIPE_CRC_SOURCE_NONE.

[How]
Add checking condition that when source is
AMDGPU_DM_PIPE_CRC_SOURCE_NONE, we should also call
dc_stream_configure_crc() to disable crc calculation.
Also, clean up crc window when disable crc calculation.

Signed-off-by: Wayne Lin 
Reviewed-by: Nicholas Kazlauskas 
Acked-by: Qingqing Zhuo 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/amd/display: Lock the CRTC when setting CRC source

2019-08-22T03:18:32+00:00

[Why]
We need to ensure that we're holding the lock on the CRTC when setting
the CRC source since we're modifying the CRTC state directly.

We also need to wait for any outstanding non-blocking commits to finish
so they aren't reading state that's potentially being modified -
non-blocking commits don't hold the CRTC lock while doing commit tail
work.

[How]
Lock the CRTC using its mutex. While holding the lock check if there's
any commit active on the CRTC - if there is, it's non-blocking and
we should wait until it's finished by waiting for hw_done to be
signaled since that's the last point where we touch CRTC state.

Signed-off-by: Nicholas Kazlauskas 
Reviewed-by: David Francis 
Signed-off-by: Alex Deucher

drm/amd/display: Split out DC programming for CRC capture

2019-08-22T03:18:25+00:00

[Why]
Calling amdgpu_dm_crtc_set_crc_source in amdgpu_dm directly has the
consequence of adding additional vblank references or starting DPRX
CRC capture more than once without calling stop first.

Vblank references for CRC capture should be managed entirely by opening
and closing the CRC file from userspace.

Stream state also shouldn't be required on the CRC so we can close the
file after the CRTC has been disabled.

[How]
Do DC programming required for configuring CRC capture separately from
setting the source. Whenever we re-enable or reset a CRC this
programming should be reapplied.

CRC vblank reference handling in amdgpu_dm can be entirely dropped after
this.

Stream state also no longer needs to be required since we can just defer
the programming to when the stream is actually enabled.

Signed-off-by: Nicholas Kazlauskas 
Reviewed-by: David Francis 
Signed-off-by: Alex Deucher

drm/amd/display: Use connector list for finding DPRX CRC aux

2019-08-22T03:18:18+00:00

[Why]
This change is a refactor in preparation for adding locking and removing
the requirement for a stream state on the CRTC for enabling CRC capture
to fix igt@kms_plane_multiple@* warnings.

[How]
We can get the aux by finding the matching connector for the CRTC
with the assumption that we're not doing cloning.

Signed-off-by: Nicholas Kazlauskas 
Reviewed-by: David Francis 
Signed-off-by: Alex Deucher

drm/amd/display: Check return code for CRC drm_crtc_vblank_get

2019-08-22T03:18:11+00:00

[Why]
The call to drm_crtc_vblank_get can fail if vblank is disabled and
we try to increment the reference.

Since drm_crtc_vblank_get internally drops the reference when it fails
it means the subsequent drm_crtc_vblank_put(...) when closing the file
drops a zero reference.

This was found via igt@kms_plane@pixel-format-pipe-A-planes.

[How]
Check the return code and return it on failure.

We wouldn't have been able to enable CRC reading anyway since vblank
wasn't enabled.

Signed-off-by: Nicholas Kazlauskas 
Reviewed-by: David Francis 
Signed-off-by: Alex Deucher

drm/amd/display: add pipe CRC sources without disabling dithering.

2019-07-18T19:27:25+00:00

[Why]
need to verify the impact of spatial dithering on 8bpc bypass mode.

[How]
added CRC sources and configure dihter option from dc stream.

Signed-off-by: Dingchen Zhang 
Reviewed-by: Hanghong Ma 
Acked-by: Leo Li 
Signed-off-by: Alex Deucher

drm/amd/display: add functionality to get pipe CRC source.

2019-07-18T19:18:09+00:00

[Why]
We need to check the pipe crc source through debugfs for bypass mode test.

[How]
add implementation of amdgpu_dm_crtc_get_crc_sources and hook into drm_crtc
callback get_crc_sources.

Signed-off-by: Dingchen Zhang 
Reviewed-by: Nicholas Kazlauskas 
Acked-by: Leo Li 
Signed-off-by: Alex Deucher

drm/amd/display: add functionality to grab DPRX CRC entries.

2019-07-18T19:18:09+00:00

[Why]
We need to compare DPRX CRCs with framebuffer CRCs for digital bypass mode.

[How]
Hook into DRM to grab DP receiver CRCs through drm_dp_start_crc.

Signed-off-by: Dingchen Zhang 
Reviewed-by: Harry Wentland 
Acked-by: Leo Li 
Signed-off-by: Alex Deucher

drm/amd: drop use of drmP.h in amdgpu.h

2019-06-10T20:59:53+00:00

Delete the unused drmP.h from amdgpu.h.
Fix fallout in various files.

Signed-off-by: Sam Ravnborg 
Reviewed-by: Alex Deucher 
Cc: "Christian König" 
Cc: "David (ChunMing) Zhou" 
Cc: David Airlie 
Cc: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-5-sam@ravnborg.org