Add mes mapping legacy queue framework support.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We can't use a shared fence location because each transaction
should be considered independently.

Reviewed-by: Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

support MES command SET_HW_RESOURCE1 in sriov

Signed-off-by: chongli2 <chongli2@amd.com>
Reviewed-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Acked-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

From MES version 0x54, the log entry increased and require the log buffer
size to be increased. The 16k is maximum size agreed

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

MES provides the driver a call to explicitly flush stale process memory
within the MES to avoid a race condition that results in a fatal
memory violation.

When SET_SHADER_DEBUGGER is called, the driver passes a memory address
that represents a process context address MES uses to keep track of
future per-process calls.

Normally, MES will purge its process context list when the last queue
has been removed.  The driver, however, can call SET_SHADER_DEBUGGER
regardless of whether a queue has been added or not.

If SET_SHADER_DEBUGGER has been called with no queues as the last call
prior to process termination, the passed process context address will
still reside within MES.

On a new process call to SET_SHADER_DEBUGGER, the driver may end up
passing an identical process context address value (based on per-process
gpu memory address) to MES but is now pointing to a new allocated buffer
object during KFD process creation.  Since the MES is unaware of this,
access of the passed address points to the stale object within MES and
triggers a fatal memory violation.

The solution is for KFD to explicitly flush the process context address
from MES on process termination.

Note that the flush call and the MES debugger calls use the same MES
interface but are separated as KFD calls to avoid conflicting with each
other.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Alice Wong <shiwei.wong@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This is the generic SW part, prepare the event log buffer and dump it through debugfs

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

MES allocates process level doorbells, but there is no userspace
client to consume it. It was only being used for the MES ring
tests (in kernel), and was written by kernel doorbell write.

The previous patch of this series has changed the MES ring test code to
use kernel level MES doorbells. This patch now cleans up the process level
doorbell allocation code which is not required.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch:
- Removes the existing doorbell management code, and its variables
  from the doorbell_init function, it will be done in doorbell
  manager now.
- uses the doorbell page created for MES kernel level needs (doorbells
  for MES self tests)
- current MES code was allocating MES doorbells in MES process context,
  but those were getting written using kernel doorbell calls. This patch
  instead allocates a MES kernel doorbell for this (in add_hw_queue).

V2: Create an extra page of doorbells for MES during kernel doorbell
    creation (Alex)
V4: Move MES doorbell size and page offset objects in this patch from
    patch 6.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

MES can concurrently schedule queues on the device that require
exclusive device access if marked exclusively_scheduled without the
requirement of GWS.  Similar to the F32 HWS, MES will manage
quality of service for these queues.
Use this for cooperative groups since cooperative groups are device
occupancy limited.

Since some GFX11 devices can only be debugged with partial CUs, do not
allow the debugging of cooperative groups on these devices as the CU
occupancy limit will change on attach.

In addition, zero initialize the MES add queue submission vector for MES
initialization tests as we do not want these to be cooperative
dispatches.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

There are a couple of fixes required to enable gfx11 debugging.

First, ADD_QUEUE.trap_en is an inappropriate place to toggle
a per-process register so move it to SET_SHADER_DEBUGGER.trap_en.
When ADD_QUEUE.skip_process_ctx_clear is set, MES will prioritize
the SET_SHADER_DEBUGGER.trap_en setting.

Second, to preserve correct save/restore priviledged wave states
in coordination with the trap enablement setting, resume suspended
waves early in the disable call.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>