linux-stable.git/drivers/gpu/drm/Makefile, branch v6.2.2

drivers/accel: define kconfig and register a new major

2022-11-22T11:13:51+00:00

Add a new Kconfig for the accel subsystem. The Kconfig currently
contains only the basic CONFIG_DRM_ACCEL option that will be used to
decide whether to compile the accel registration code. Therefore, the
kconfig option is defined as bool.

The accel code will be compiled as part of drm.ko and will be called
directly from the DRM core code. The reason we compile it as part of
drm.ko and not as a separate module is because of cyclic dependency
between drm.ko and the separate module (if it would have existed).
This is due to the fact that DRM core code calls accel functions and
vice-versa.

The accelerator devices will be exposed to the user space with a new,
dedicated major number - 261.

The accel init function registers the new major number as a char device
and create corresponding sysfs and debugfs root entries, similar to
what is done in DRM init function.

I added a new header called drm_accel.h to include/drm/, that will hold
the prototypes of the drm_accel.c functions. In case CONFIG_DRM_ACCEL
is set to 'N', that header will contain empty inline implementations of
those functions, to allow DRM core code to compile successfully
without dependency on CONFIG_DRM_ACCEL.

I Updated the MAINTAINERS file accordingly with the newly added folder
and I have taken the liberty to appropriate the dri-devel mailing list
and the dri-devel IRC channel for the accel subsystem.

Signed-off-by: Oded Gabbay 
Reviewed-by: Greg Kroah-Hartman 
Reviewed-by: Jeffrey Hugo 
Reviewed-by: Dave Airlie 
Acked-by: Thomas Zimmermann 
Acked-by: Jacek Lawrynowicz 
Tested-by: Jacek Lawrynowicz 
Reviewed-by: Melissa Wen

drm: Move nomodeset kernel parameter to drivers/video

2022-11-16T12:26:12+00:00

Move the nomodeset kernel parameter to drivers/video to make it
available to non-DRM drivers. Adapt the interface, but keep the DRM
interface drm_firmware_drivers_only() to avoid churn within DRM. The
function should later be inlined into callers.

The parameter disables any DRM graphics driver that would replace a
driver for firmware-provided scanout buffers. It is an option to easily
fallback to basic graphics output if the hardware's native driver is
broken. Moving it to a more prominent location wil make it available
to fbdev as well.

v2:
	* clarify the meaning of the nomodeset parameter (Javier)

Signed-off-by: Thomas Zimmermann 
Reviewed-by: Javier Martinez Canillas 
Link: https://patchwork.freedesktop.org/patch/msgid/20221111133024.9897-2-tzimmermann@suse.de

drm/fb-helper: Move generic fbdev emulation into separate source file

2022-11-05T16:12:04+00:00

Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.

v3:
	* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
	* rebase onto vmwgfx changes
	* rebase onto xlnx changes
	* fix include statements in amdgpu

Signed-off-by: Thomas Zimmermann 
Reviewed-by: Javier Martinez Canillas 
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de

Merge drm/drm-next into drm-misc-next

2022-10-18T13:00:03+00:00

Let's kick-off this release cycle.

Signed-off-by: Maxime Ripard

drm: split build lists one per line and sort

2022-10-12T14:00:05+00:00

While it takes more vertical space, sorted build lists with one object
per line are arguably easier to manage, especially when there are
conflicting changes.

Split anything with more than one object file.

v2: also split drm_cache.o and put it after drm_bridge.o (Andi)

Signed-off-by: Jani Nikula 
Reviewed-by: Andi Shyti 
Acked-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20221011140830.3257655-1-jani.nikula@intel.com

Merge tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2022-10-08T00:04:10+00:00

Pull driver core updates from Greg KH:
 "Here is the big set of driver core and debug printk changes for
  6.1-rc1. Included in here is:

   - dynamic debug updates for the core and the drm subsystem. The drm
     changes have all been acked by the relevant maintainers

   - kernfs fixes for syzbot reported problems

   - kernfs refactors and updates for cgroup requirements

   - magic number cleanups and removals from the kernel tree (they were
     not being used and they really did not actually do anything)

   - other tiny cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits)
  docs: filesystems: sysfs: Make text and code for ->show() consistent
  Documentation: NBD_REQUEST_MAGIC isn't a magic number
  a.out: restore CMAGIC
  device property: Add const qualifier to device_get_match_data() parameter
  drm_print: add _ddebug descriptor to drm_*dbg prototypes
  drm_print: prefer bare printk KERN_DEBUG on generic fn
  drm_print: optimize drm_debug_enabled for jump-label
  drm-print: add drm_dbg_driver to improve namespace symmetry
  drm-print.h: include dyndbg header
  drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
  drm_print: interpose drm_*dbg with forwarding macros
  drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
  drm_print: condense enum drm_debug_category
  debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops
  driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()
  Documentation: ENI155_MAGIC isn't a magic number
  Documentation: NBD_REPLY_MAGIC isn't a magic number
  nbd: remove define-only NBD_MAGIC, previously magic number
  Documentation: FW_HEADER_MAGIC isn't a magic number
  Documentation: EEPROM_MAGIC_VALUE isn't a magic number
  ...

drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro

2022-09-24T13:02:01+00:00

For CONFIG_DRM_USE_DYNAMIC_DEBUG=y, wrap __drm_dbg() & __drm_dev_dbg()
in one of dyndbg's Factory macros: _dynamic_func_call_no_desc().

This adds the callsite descriptor into the code, and an entry for each
into /proc/dynamic_debug/control.

  #> echo class DRM_UT_ATOMIC +p > /proc/dynamic_debug/control

CONFIG_DRM_USE_DYNAMIC_DEBUG=y/n is configurable because of the .data
footprint cost of per-callsite control; 56 bytes/site * ~2k for i915,
~4k callsites for amdgpu.  This is large enough that a kernel builder
might not want it.

Signed-off-by: Jim Cromie 
Link: https://lore.kernel.org/r/20220912052852.1123868-5-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman

drm/gem: rename GEM CMA helpers to GEM DMA helpers

2022-08-03T16:31:49+00:00

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
	#!/bin/bash

	DIRS="drivers/gpu include/drm Documentation/gpu"

	REGEX_SYM_UPPER="[0-9A-Z_\-]"
	REGEX_SYM_LOWER="[0-9a-z_\-]"

	REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
	REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

	REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
	REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

	# Find all upper case 'CMA' symbols and replace them with 'DMA'.
	for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_UPPER" $ff
	done

	# Find all lower case 'cma' symbols and replace them with 'dma'.
	for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_LOWER" $ff
	done

	# Replace all occurrences of 'CMA' / 'cma' in comments and
	# documentation files with 'DMA' / 'dma'.
	for ff in $(grep -RiHl " cma " $DIRS)
	do
		sed -i -E "s/ cma / dma /g" $ff
		sed -i -E "s/ CMA / DMA /g" $ff
	done

	# Rename all 'cma_obj's to 'dma_obj'.
	for ff in $(grep -RiHl "cma_obj" $DIRS)
	do
		sed -i -E "s/cma_obj/dma_obj/g" $ff
	done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

    -       select CMA if HAVE_DMA_CONTIGUOUS
    +       select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg 
Acked-by: Thomas Zimmermann 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Danilo Krummrich 
Reviewed-by: Liviu Dudau  #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com

drm/fb: rename FB CMA helpers to FB DMA helpers

2022-08-03T16:30:55+00:00

Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy
of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be
more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
	#!/bin/bash

	DIRS="drivers/gpu include/drm Documentation/gpu"

	REGEX_SYM_UPPER="[0-9A-Z_\-]"
	REGEX_SYM_LOWER="[0-9a-z_\-]"

	REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)"
	REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)"

	REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
	REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

	# Find all upper case 'CMA' symbols and replace them with 'DMA'.
	for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_UPPER" $ff
	done

	# Find all lower case 'cma' symbols and replace them with 'dma'.
	for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_LOWER" $ff
	done

	# Replace all occurrences of 'CMA' / 'cma' in comments and
	# documentation files with 'DMA' / 'dma'.
	for ff in $(grep -RiHl " cma " $DIRS)
	do
		sed -i -E "s/ cma / dma /g" $ff
		sed -i -E "s/ CMA / DMA /g" $ff
	done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

    -       select CMA if HAVE_DMA_CONTIGUOUS
    +       select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "FB CMA", but not "GEM CMA".

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg 
Acked-by: Thomas Zimmermann 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Danilo Krummrich 
Reviewed-by: Liviu Dudau  #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com

drm: selftest: convert drm_mm selftest to KUnit

2022-07-11T12:00:05+00:00

Considering the current adoption of the KUnit framework, convert the
DRM mm selftest to the KUnit API.

Signed-off-by: Arthur Grillo 
Tested-by: David Gow 
Acked-by: Daniel Latypov 
Reviewed-by: Javier Martinez Canillas 
Signed-off-by: Maíra Canal 
Signed-off-by: Javier Martinez Canillas 
Link: https://patchwork.freedesktop.org/patch/msgid/20220708203052.236290-10-maira.canal@usp.br