First radeon and amdgpu pull request for 4.6.  Highlights:
- ACP support for APUs with i2s audio
- CS ioctl optimizations
- GPU scheduler optimizations
- GPUVM optimizations
- Initial GPU reset support (not enabled yet)
- New powerplay sysfs interface for manually selecting clocks
- Powerplay fixes
- Virtualization fixes
- Removal of hw semaphore support
- Lots of other misc fixes and cleanups

* 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux: (118 commits)
  drm/amdgpu: Don't call interval_tree_remove in amdgpu_mn_destroy
  drm/amdgpu: Fix race condition in amdgpu_mn_unregister
  drm/amdgpu: cleanup gem init/finit
  drm/amdgpu: rework GEM info printing
  drm/amdgpu: print the GPU offset as well in gem_info
  drm/amdgpu: optionally print the pin count in gem_info as well
  drm/amdgpu: print the BO size only once in amdgpu_gem_info
  drm/amdgpu: print pid as integer
  drm/amdgpu: remove page flip work queue v3
  drm/amdgpu: stop blocking for page filp fences
  drm/amdgpu: stop calling amdgpu_gpu_reset from the flip code
  drm/amdgpu: remove fence reset detection leftovers
  drm/amdgpu: Fix race condition in MMU notifier release
  drm/radeon: Fix WARN_ON if DRM_DP_AUX_CHARDEV is enabled
  drm/amdgpu/vi: move uvd tiling config setup into uvd code
  drm/amdgpu/vi: move sdma tiling config setup into sdma code
  drm/amdgpu/cik: move uvd tiling config setup into uvd code
  drm/amdgpu/cik: move sdma tiling config setup into sdma code
  drm/amdgpu/gfx7: rework gpu_init()
  drm/amdgpu/gfx: clean up harvest configuration (v2)
  ...

Misc stuff all over:
- more mode_fixup removal from Carlos, there's another final pile still
  left.
- final bits of vgaswitcheroo from Lukas for apple gmux, we're still
  discussing an api cleanup patch to make it a bit more abuse-safe as a
  follow-up
- dp aux interface for userspace for tools&tests from Rafael Antognolli
- actual interface parts for dma-buf flushing for userspace mmap
- few small bits all over

- vgaswitcheroo support for apple gmux from Lukas Wunner
- checks for ->mode_fixup in non-atomic helpers from Carlos Palminha, plus
  removing dummy funcs from drivers. Carlos promised to follow up with
  more, since there's lots more silly dummy functions around.
- dma-buf patches from Tiago, except the ioctl itself (that needed a
  respin to address review from David Herrmann)
- encoder mask for atomic from Maarten
- bunch of random things all over.

* tag 'topic/drm-misc-2016-02-18' of git://anongit.freedesktop.org/drm-intel: (57 commits)
  drm/udl: Use module_usb_driver
  drm: fixes crct set_mode when crtc mode_fixup is null.
  drm/tilcdc: removed optional dummy encoder mode_fixup function.
  drm/sti: removed optional dummy encoder mode_fixup function.
  drm/rockchip: removed optional dummy encoder mode_fixup function.
  drm/qxl: removed optional dummy encoder mode_fixup function.
  drm/mgag200: removed optional dummy encoder mode_fixup function.
  drm/msm/mdp: removed optional dummy encoder mode_fixup function.
  drm/imx: removed optional dummy encoder mode_fixup function.
  drm/gma500: removed optional dummy encoder mode_fixup function.
  drm/radeon: removed optional dummy encoder mode_fixup function.
  drm/cirrus: removed optional dummy encoder mode_fixup function.
  drm/bochs: removed optional dummy encoder mode_fixup function.
  drm/ast: removed optional dummy encoder mode_fixup function.
  drm/amdgpu: removed optional dummy encoder mode_fixup function.
  drm/exynos: removed optional dummy encoder mode_fixup function.
  drm/udl: removed optional dummy encoder mode_fixup function.
  drm/virtio: removed optional dummy encoder mode_fixup function.
  drm/fb_helper: Use add_one_connector in add_all_connectors.
  drm/fb_helper: Use correct allocation count for arrays.
  ...

This module is heavily based on i2c-dev. Once loaded, it provides one
dev node per DP AUX channel, named drm_dp_auxN, where N is an integer.

It's possible to know which connector owns this aux channel by looking
at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if
the connector device pointer was correctly set in the aux helper struct.

Two main operations are provided on the registers read and write. The
address of the register to be read or written is given using lseek. The
seek position is updated upon read or write.

v2:
 - lseek is used to select the register to read/write
 - read/write are used instead of ioctl
 - no blocking_notifier is used, just a direct callback

v3:
 - use drm_dp_aux_dev prefix for public functions
 - chardev is named drm_dp_auxN
 - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a
   time
 - remove notifier list from the implementation
 - option on menuconfig is now a boolean
 - add inline stub functions to avoid breakage when this option is disabled

v4:
 - fix build system changes - actually disable this module when not selected.

v5:
 - Use kref to avoid device closing while still in use
 - Don't use list, use an idr for storing aux_dev
 - Remove "connector" attribute
 - set aux.dev to the connector drm_connector device, instead of
   drm_device

v6:
 - Use atomic_t for usage count
 - Use a mutex instead of spinlock for idr lock
 - Destroy chardev immediately on unregister
 - other minor suggestions from Ville

v7:
 - style fixes
 - error handling fixes

v8:
 - more error handling fixes

v9:
 - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit
 to drm_kms_helper_init/exit.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com

This adds the ACP (Audio CoProcessor) IP driver and wires
it up to the amdgpu driver.  The ACP block provides the DMA
engine for i2s based ALSA driver. This is required for audio
on APUs that utilize an i2s codec.

Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Murali Krishna Vemuri <murali-krishna.vemuri@amd.com>
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The HDLCD controller is a display controller that supports resolutions
up to 4096x4096 pixels. It is present on various development boards
produced by ARM Ltd and emulated by the latest Fast Models from the
company.

Cc: David Airlie <airlied@linux.ie>
Cc: Robin Murphy <robin.murphy@arm.com>

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
[Kconfig cleanup and !CONFIG_PM fixes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Move the generic implementation to <linux/dma-mapping.h> now that all
architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now
that everyone supports them.

[valentinrothberg@gmail.com: remove leftovers in Kconfig]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Helge Deller <deller@gmx.de>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[airlied: fixup build problems on arm - added errno.h include]
* 'drm-next-4.5' of git://people.freedesktop.org/~agd5f/linux: (152 commits)
  amd/powerplay: fix copy paste typo in hardwaremanager.c
  amd/powerplay: disable powerplay by default initially
  amd/powerplay: don't enable ucode fan control if vbios has no fan table
  drm/amd/powerplay: show gpu load when print gpu performance for Cz. (v2)
  drm/amd/powerplay: check whether need to enable thermal control. (v2)
  drm/amd/powerplay: add point check to avoid NULL point hang.
  drm/amdgpu/powerplay: Program a calculated value as Deep Sleep clock.
  drm/amd/powerplay: Don't return an error if fan table is missing
  drm/powerplay/hwmgr: log errors in tonga_hwmgr_backend_init
  drm/powerplay: add debugging output to processpptables.c
  drm/powerplay: add debugging output to tonga_processpptables.c
  amd/powerplay: Add structures required to report configuration change
  amd/powerplay: Fix get dal power level
  amd\powerplay Implement get dal power level
  drm/amd/powerplay: display gpu load when print performance for tonga.
  drm/amdgpu/powerplay: enable sysfs and debugfs interfaces late
  drm/amd/powerplay: move shared function of vi to hwmgr. (v2)
  drm/amd/powerplay: check whether enable dpm in powerplay.
  drm/amd/powerplay: fix bug that dpm funcs in debugfs/sysfs missing.
  drm/amd/powerplay: fix boolreturn.cocci warnings
  ...

amdgpu_pp_ip_funcs is introduced to handle the two code paths,
the legacy one and the new powerplay implementation.

CONFIG_DRM_AMD_POWERPLAY kernel configuration option is
introduced for the powerplay component.

v4: squash in fixes
v3: register debugfs file when powerplay module enable
v2: add amdgpu_ucode_init_bo in hw init when amdgpu_powerplay enable.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This adds the etnaviv DRM driver and hooks it up in Makefiles
and Kconfig.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This is enough for fbcon and bringing up X using
xf86-video-modesetting.  It doesn't support the 3D accelerator or
power management yet.

v2: Drop FB_HELPER select thanks to Archit's patches.  Do manual init
    ordering instead of using the .load hook.  Structure registration
    more like tegra's, but still using the typical "component" code.
    Drop no-op hooks for atomic_begin and mode_fixup() now that
    they're optional.  Drop sentinel in Makefile.  Fix minor style
    nits I noticed on another reread.

v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead
    of having a fixed video mode.  Use exynos-style component driver
    matching instead of devicetree nodes to list the component driver
    instances.  Rename compatibility strings to say bcm2835, and
    distinguish pv0/1/2.  Clean up some h/vsync code, and add in
    interlaced mode setup.  Fix up probe/bind error paths.  Use
    bitops.h macros for vc4_regs.h

v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now
    that other bugs have been fixed, add timeouts to cpu_relax()
    loops, rename hpd-gpio to hpd-gpios.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>