linux-stable.git/drivers/gpio, branch v6.6.63 Linux kernel stable tree gpio: aspeed: Use devm_clk api to manage clock source 2024-10-17T13:24:26+00:00 Billy Tsai billy_tsai@aspeedtech.com 2024-10-08T08:14:45+00:00 1e4a5eed757c5d8ff9acd8ef3c0b31d94074626e [ Upstream commit a6191a3d18119184237f4ee600039081ad992320 ] Replace of_clk_get with devm_clk_get_enabled to manage the clock source. Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support") Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20241008081450.1490955-3-billy_tsai@aspeedtech.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a6191a3d18119184237f4ee600039081ad992320 ]

Replace of_clk_get with devm_clk_get_enabled to manage the clock source.

Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support")
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20241008081450.1490955-3-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: aspeed: Add the flush write to ensure the write complete. 2024-10-17T13:24:26+00:00 Billy Tsai billy_tsai@aspeedtech.com 2024-10-08T08:14:44+00:00 2a165df9ce203ca7ab306ac6311a2772ed062ec5 [ Upstream commit 1bb5a99e1f3fd27accb804aa0443a789161f843c ] Performing a dummy read ensures that the register write operation is fully completed, mitigating any potential bus delays that could otherwise impact the frequency of bitbang usage. E.g., if the JTAG application uses GPIO to control the JTAG pins (TCK, TMS, TDI, TDO, and TRST), and the application sets the TCK clock to 1 MHz, the GPIO's high/low transitions will rely on a delay function to ensure the clock frequency does not exceed 1 MHz. However, this can lead to rapid toggling of the GPIO because the write operation is POSTed and does not wait for a bus acknowledgment. Fixes: 361b79119a4b ("gpio: Add Aspeed driver") Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20241008081450.1490955-2-billy_tsai@aspeedtech.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1bb5a99e1f3fd27accb804aa0443a789161f843c ]

Performing a dummy read ensures that the register write operation is fully
completed, mitigating any potential bus delays that could otherwise impact
the frequency of bitbang usage. E.g., if the JTAG application uses GPIO to
control the JTAG pins (TCK, TMS, TDI, TDO, and TRST), and the application
sets the TCK clock to 1 MHz, the GPIO's high/low transitions will rely on
a delay function to ensure the clock frequency does not exceed 1 MHz.
However, this can lead to rapid toggling of the GPIO because the write
operation is POSTed and does not wait for a bus acknowledgment.

Fixes: 361b79119a4b ("gpio: Add Aspeed driver")
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20241008081450.1490955-2-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: davinci: fix lazy disable 2024-10-10T09:57:58+00:00 Emanuele Ghidoli emanuele.ghidoli@toradex.com 2024-08-28T13:32:07+00:00 7c5cd531d09387990967415a64f4346cef296ae5 commit 3360d41f4ac490282fddc3ccc0b58679aa5c065d upstream. On a few platforms such as TI's AM69 device, disable_irq() fails to keep track of the interrupts that happen between disable_irq() and enable_irq() and those interrupts are missed. Use the ->irq_unmask() and ->irq_mask() methods instead of ->irq_enable() and ->irq_disable() to correctly keep track of edges when disable_irq is called. This solves the issue of disable_irq() not working as expected on such platforms. Fixes: 23265442b02b ("ARM: davinci: irq_data conversion.") Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com> Acked-by: Keerthy <j-keerthy@ti.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240828133207.493961-1-parth105105@gmail.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3360d41f4ac490282fddc3ccc0b58679aa5c065d upstream.

On a few platforms such as TI's AM69 device, disable_irq() fails to keep
track of the interrupts that happen between disable_irq() and
enable_irq() and those interrupts are missed. Use the ->irq_unmask() and
->irq_mask() methods instead of ->irq_enable() and ->irq_disable() to
correctly keep track of edges when disable_irq is called.

This solves the issue of disable_irq() not working as expected on such
platforms.

Fixes: 23265442b02b ("ARM: davinci: irq_data conversion.")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Acked-by: Keerthy <j-keerthy@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240828133207.493961-1-parth105105@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpiolib: cdev: Ignore reconfiguration without direction 2024-09-30T14:25:14+00:00 Kent Gibson warthog618@gmail.com 2024-06-26T05:29:23+00:00 c4e98006092b59898111ccf7552c7b9c7f137236 commit b440396387418fe2feaacd41ca16080e7a8bc9ad upstream. linereq_set_config() behaves badly when direction is not set. The configuration validation is borrowed from linereq_create(), where, to verify the intent of the user, the direction must be set to in order to effect a change to the electrical configuration of a line. But, when applied to reconfiguration, that validation does not allow for the unset direction case, making it possible to clear flags set previously without specifying the line direction. Adding to the inconsistency, those changes are not immediately applied by linereq_set_config(), but will take effect when the line value is next get or set. For example, by requesting a configuration with no flags set, an output line with GPIO_V2_LINE_FLAG_ACTIVE_LOW and GPIO_V2_LINE_FLAG_OPEN_DRAIN set could have those flags cleared, inverting the sense of the line and changing the line drive to push-pull on the next line value set. Skip the reconfiguration of lines for which the direction is not set, and only reconfigure the lines for which direction is set. Fixes: a54756cb24ea ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL") Signed-off-by: Kent Gibson <warthog618@gmail.com> Link: https://lore.kernel.org/r/20240626052925.174272-3-warthog618@gmail.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b440396387418fe2feaacd41ca16080e7a8bc9ad upstream.

linereq_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linereq_create(), where,
to verify the intent of the user, the direction must be set to in order to
effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.

Adding to the inconsistency, those changes are not immediately applied by
linereq_set_config(), but will take effect when the line value is next get
or set.

For example, by requesting a configuration with no flags set, an output
line with GPIO_V2_LINE_FLAG_ACTIVE_LOW and GPIO_V2_LINE_FLAG_OPEN_DRAIN
set could have those flags cleared, inverting the sense of the line and
changing the line drive to push-pull on the next line value set.

Skip the reconfiguration of lines for which the direction is not set, and
only reconfigure the lines for which direction is set.

Fixes: a54756cb24ea ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-3-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: modepin: Enable module autoloading 2024-09-12T09:11:44+00:00 Liao Chen liaochen4@huawei.com 2024-09-02T11:58:48+00:00 52b688c8087b3fb1edd547b18a7cd9c80279212e [ Upstream commit a5135526426df5319d5f4bcd15ae57c45a97714b ] Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Fixes: 7687a5b0ee93 ("gpio: modepin: Add driver support for modepin GPIO controller") Signed-off-by: Liao Chen <liaochen4@huawei.com> Reviewed-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20240902115848.904227-1-liaochen4@huawei.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a5135526426df5319d5f4bcd15ae57c45a97714b ]

Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.

Fixes: 7687a5b0ee93 ("gpio: modepin: Add driver support for modepin GPIO controller")
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240902115848.904227-1-liaochen4@huawei.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: rockchip: fix OF node leak in probe() 2024-09-12T09:11:44+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2024-08-26T15:08:32+00:00 9ceae54e65a39d456160fe6dfe1b13a475b88834 [ Upstream commit adad2e460e505a556f5ea6f0dc16fe95e62d5d76 ] Driver code is leaking OF node reference from of_get_parent() in probe(). Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Link: https://lore.kernel.org/r/20240826150832.65657-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit adad2e460e505a556f5ea6f0dc16fe95e62d5d76 ]

Driver code is leaking OF node reference from of_get_parent() in
probe().

Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20240826150832.65657-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: sysfs: extend the critical section for unregistering sysfs devices 2024-08-29T15:33:34+00:00 Bartosz Golaszewski bartosz.golaszewski@linaro.org 2024-01-24T13:08:45+00:00 53b2f3539958e91bda0bca93a024532e4c2a5e4f [ Upstream commit 59cba4a0e6ca1058fbf88fec22530a4e2841802a ] Checking the gdev->mockdev pointer for NULL must be part of the critical section. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 59cba4a0e6ca1058fbf88fec22530a4e2841802a ]

Checking the gdev->mockdev pointer for NULL must be part of the critical
section.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: mlxbf3: Support shutdown() function 2024-08-29T15:33:22+00:00 Asmaa Mnebhi asmaa@nvidia.com 2024-06-11T17:15:09+00:00 a8544dec14a77dad6d94fee7b96c95ff97c2f60f [ Upstream commit aad41832326723627ad8ac9ee8a543b6dca4454d ] During Linux graceful reboot, the GPIO interrupts are not disabled. Since the drivers are not removed during graceful reboot, the logic to call mlxbf3_gpio_irq_disable() is not triggered. Interrupts that remain enabled can cause issues on subsequent boots. For example, the mlxbf-gige driver contains PHY logic to bring up the link. If the gpio-mlxbf3 driver loads first, the mlxbf-gige driver will use a GPIO interrupt to bring up the link. Otherwise, it will use polling. The next time Linux boots and loads the drivers in this order, we encounter the issue: - mlxbf-gige loads first and uses polling while the GPIO10 interrupt is still enabled from the previous boot. So if the interrupt triggers, there is nothing to clear it. - gpio-mlxbf3 loads. - i2c-mlxbf loads. The interrupt doesn't trigger for I2C because it is shared with the GPIO interrupt line which was not cleared. The solution is to add a shutdown function to the GPIO driver to clear and disable all interrupts. Also clear the interrupt after disabling it in mlxbf3_gpio_irq_disable(). Fixes: 38a700efc510 ("gpio: mlxbf3: Add gpio driver support") Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Reviewed-by: David Thompson <davthompson@nvidia.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240611171509.22151-1-asmaa@nvidia.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit aad41832326723627ad8ac9ee8a543b6dca4454d ]

During Linux graceful reboot, the GPIO interrupts are not disabled.
Since the drivers are not removed during graceful reboot,
the logic to call mlxbf3_gpio_irq_disable() is not triggered.
Interrupts that remain enabled can cause issues on subsequent boots.

For example, the mlxbf-gige driver contains PHY logic to bring up the link.
If the gpio-mlxbf3 driver loads first, the mlxbf-gige driver
will use a GPIO interrupt to bring up the link.
Otherwise, it will use polling.
The next time Linux boots and loads the drivers in this order, we encounter the issue:
- mlxbf-gige loads first and uses polling while the GPIO10
  interrupt is still enabled from the previous boot. So if
  the interrupt triggers, there is nothing to clear it.
- gpio-mlxbf3 loads.
- i2c-mlxbf loads. The interrupt doesn't trigger for I2C
  because it is shared with the GPIO interrupt line which
  was not cleared.

The solution is to add a shutdown function to the GPIO driver to clear and disable
all interrupts. Also clear the interrupt after disabling it in mlxbf3_gpio_irq_disable().

Fixes: 38a700efc510 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240611171509.22151-1-asmaa@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: prevent potential speculation leaks in gpio_device_get_desc() 2024-08-14T11:58:40+00:00 Hagar Hemdan hagarhem@amazon.com 2024-05-23T08:53:32+00:00 1b955f786a4bcde8c0ccb2b7d519def2acb6f3cc [ Upstream commit d795848ecce24a75dfd46481aee066ae6fe39775 ] Userspace may trigger a speculative read of an address outside the gpio descriptor array. Users can do that by calling gpio_ioctl() with an offset out of range. Offset is copied from user and then used as an array index to get the gpio descriptor without sanitization in gpio_device_get_desc(). This change ensures that the offset is sanitized by using array_index_nospec() to mitigate any possibility of speculative information leaks. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Signed-off-by: Hagar Hemdan <hagarhem@amazon.com> Link: https://lore.kernel.org/r/20240523085332.1801-1-hagarhem@amazon.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d795848ecce24a75dfd46481aee066ae6fe39775 ]

Userspace may trigger a speculative read of an address outside the gpio
descriptor array.
Users can do that by calling gpio_ioctl() with an offset out of range.
Offset is copied from user and then used as an array index to get
the gpio descriptor without sanitization in gpio_device_get_desc().

This change ensures that the offset is sanitized by using
array_index_nospec() to mitigate any possibility of speculative
information leaks.

This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.

Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/r/20240523085332.1801-1-hagarhem@amazon.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: pca953x: fix pca953x_irq_bus_sync_unlock race 2024-07-25T07:50:50+00:00 Ian Ray ian.ray@gehealthcare.com 2024-06-20T04:29:15+00:00 e2ecdddca80dd845df42376e4b0197fe97018ba2 [ Upstream commit bfc6444b57dc7186b6acc964705d7516cbaf3904 ] Ensure that `i2c_lock' is held when setting interrupt latch and mask in pca953x_irq_bus_sync_unlock() in order to avoid races. The other (non-probe) call site pca953x_gpio_set_multiple() ensures the lock is held before calling pca953x_write_regs(). The problem occurred when a request raced against irq_bus_sync_unlock() approximately once per thousand reboots on an i.MX8MP based system. * Normal case 0-0022: write register AI|3a {03,02,00,00,01} Input latch P0 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 * Race case 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|08 {03,02,00,00,01} *** Wrong register *** 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0 Signed-off-by: Ian Ray <ian.ray@gehealthcare.com> Link: https://lore.kernel.org/r/20240620042915.2173-1-ian.ray@gehealthcare.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit bfc6444b57dc7186b6acc964705d7516cbaf3904 ]

Ensure that `i2c_lock' is held when setting interrupt latch and mask in
pca953x_irq_bus_sync_unlock() in order to avoid races.

The other (non-probe) call site pca953x_gpio_set_multiple() ensures the
lock is held before calling pca953x_write_regs().

The problem occurred when a request raced against irq_bus_sync_unlock()
approximately once per thousand reboots on an i.MX8MP based system.

 * Normal case

   0-0022: write register AI|3a {03,02,00,00,01} Input latch P0
   0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0
   0-0022: write register AI|08 {ff,00,00,00,00} Output P3
   0-0022: write register AI|12 {fc,00,00,00,00} Config P3

 * Race case

   0-0022: write register AI|08 {ff,00,00,00,00} Output P3
   0-0022: write register AI|08 {03,02,00,00,01} *** Wrong register ***
   0-0022: write register AI|12 {fc,00,00,00,00} Config P3
   0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0

Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://lore.kernel.org/r/20240620042915.2173-1-ian.ray@gehealthcare.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>