linux-stable.git/drivers/gpio, branch v6.1.142 Linux kernel stable tree gpio: pca953x: fix IRQ storm on system wake up 2025-06-04T12:40:01+00:00 Emanuele Ghidoli emanuele.ghidoli@toradex.com 2025-05-12T09:54:41+00:00 262e32568acc2a2fbdc4322fb71f602dcaa929b5 [ Upstream commit 3e38f946062b4845961ab86b726651b4457b2af8 ] If an input changes state during wake-up and is used as an interrupt source, the IRQ handler reads the volatile input register to clear the interrupt mask and deassert the IRQ line. However, the IRQ handler is triggered before access to the register is granted, causing the read operation to fail. As a result, the IRQ handler enters a loop, repeatedly printing the "failed reading register" message, until `pca953x_resume()` is eventually called, which restores the driver context and enables access to registers. Fix by disabling the IRQ line before entering suspend mode, and re-enabling it after the driver context is restored in `pca953x_resume()`. An IRQ can be disabled with disable_irq() and still wake the system as long as the IRQ has wake enabled, so the wake-up functionality is preserved. Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle") Cc: stable@vger.kernel.org Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20250512095441.31645-1-francesco@dolcini.it Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3e38f946062b4845961ab86b726651b4457b2af8 ]

If an input changes state during wake-up and is used as an interrupt
source, the IRQ handler reads the volatile input register to clear the
interrupt mask and deassert the IRQ line. However, the IRQ handler is
triggered before access to the register is granted, causing the read
operation to fail.

As a result, the IRQ handler enters a loop, repeatedly printing the
"failed reading register" message, until `pca953x_resume()` is eventually
called, which restores the driver context and enables access to
registers.

Fix by disabling the IRQ line before entering suspend mode, and
re-enabling it after the driver context is restored in `pca953x_resume()`.

An IRQ can be disabled with disable_irq() and still wake the system as
long as the IRQ has wake enabled, so the wake-up functionality is
preserved.

Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Cc: stable@vger.kernel.org
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250512095441.31645-1-francesco@dolcini.it
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: pca953x: Simplify code with cleanup helpers 2025-06-04T12:40:00+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2023-09-01T13:40:36+00:00 aa34c055d34a7dcd9d305f423804ced56e1018ba [ Upstream commit 8e471b784a720f6f34f9fb449ba0744359dcaccb ] Use macros defined in linux/cleanup.h to automate resource lifetime control in gpio-pca953x. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Stable-dep-of: 3e38f946062b ("gpio: pca953x: fix IRQ storm on system wake up") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8e471b784a720f6f34f9fb449ba0744359dcaccb ]

Use macros defined in linux/cleanup.h to automate resource lifetime
control in gpio-pca953x.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: 3e38f946062b ("gpio: pca953x: fix IRQ storm on system wake up")
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: pca953x: Split pca953x_restore_context() and pca953x_save_context() 2025-06-04T12:40:00+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2023-09-01T13:40:35+00:00 af7488d114a92412c804d6d46e246faf409e0ae4 [ Upstream commit ec5bde62019b0a5300c67bd81b9864a8ea12274e ] Split regcache handling to the respective helpers. It will allow to have further refactoring with ease. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Stable-dep-of: 3e38f946062b ("gpio: pca953x: fix IRQ storm on system wake up") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ec5bde62019b0a5300c67bd81b9864a8ea12274e ]

Split regcache handling to the respective helpers. It will allow to
have further refactoring with ease.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: 3e38f946062b ("gpio: pca953x: fix IRQ storm on system wake up")
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: pca953x: Add missing header(s) 2025-06-04T12:40:00+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2022-10-07T13:44:44+00:00 59047be46c7d04c00980342dbd01ed21b22e3702 [ Upstream commit c20a395f9bf939ef0587ce5fa14316ac26252e9b ] Do not imply that some of the generic headers may be always included. Instead, include explicitly what we are direct user of. While at it, sort headers alphabetically. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Stable-dep-of: 3e38f946062b ("gpio: pca953x: fix IRQ storm on system wake up") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c20a395f9bf939ef0587ce5fa14316ac26252e9b ]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 3e38f946062b ("gpio: pca953x: fix IRQ storm on system wake up")
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: zynq: Fix wakeup source leaks on device unbind 2025-04-25T08:43:44+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2025-04-06T20:22:45+00:00 bcfb1e4eb09c318c6523d80def15396f47bf0f97 commit c5672e310ad971d408752fce7596ed27adc6008f upstream. Device can be unbound, so driver must also release memory for the wakeup source. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250406202245.53854-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c5672e310ad971d408752fce7596ed27adc6008f upstream.

Device can be unbound, so driver must also release memory for the wakeup
source.

Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406202245.53854-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: tegra186: fix resource handling in ACPI probe path 2025-04-25T08:43:44+00:00 Guixin Liu kanie@linux.alibaba.com 2025-03-27T03:23:49+00:00 5b3cc7e03c7d3e5852a1d54179a5188ad5fd1c81 commit 8323f3a69de6f6e96bf22f32dd8e2920766050c2 upstream. When the Tegra186 GPIO controller is probed through ACPI matching, the driver emits two error messages during probing: "tegra186-gpio NVDA0508:00: invalid resource (null)" "tegra186-gpio NVDA0508:00: invalid resource (null)" Fix this by getting resource first and then do the ioremap. Fixes: 2606e7c9f5fc ("gpio: tegra186: Add ACPI support") Cc: stable@vger.kernel.org Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Link: https://lore.kernel.org/r/20250327032349.78809-1-kanie@linux.alibaba.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8323f3a69de6f6e96bf22f32dd8e2920766050c2 upstream.

When the Tegra186 GPIO controller is probed through ACPI matching,
the driver emits two error messages during probing:
  "tegra186-gpio NVDA0508:00: invalid resource (null)"
  "tegra186-gpio NVDA0508:00: invalid resource (null)"

Fix this by getting resource first and then do the ioremap.

Fixes: 2606e7c9f5fc ("gpio: tegra186: Add ACPI support")
Cc: stable@vger.kernel.org
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250327032349.78809-1-kanie@linux.alibaba.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: rcar: Fix missing of_node_put() call 2025-03-13T11:53:19+00:00 Fabrizio Castro fabrizio.castro.jz@renesas.com 2025-03-05T16:37:50+00:00 1f59fc0d0097eef548538ddc5d9f7767862002e6 [ Upstream commit 391b41f983bf7ff853de44704d8e14e7cc648a9b ] of_parse_phandle_with_fixed_args() requires its caller to call into of_node_put() on the node pointer from the output structure, but such a call is currently missing. Call into of_node_put() to rectify that. Fixes: 159f8a0209af ("gpio-rcar: Add DT support") Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20250305163753.34913-2-fabrizio.castro.jz@renesas.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 391b41f983bf7ff853de44704d8e14e7cc648a9b ]

of_parse_phandle_with_fixed_args() requires its caller to
call into of_node_put() on the node pointer from the output
structure, but such a call is currently missing.

Call into of_node_put() to rectify that.

Fixes: 159f8a0209af ("gpio-rcar: Add DT support")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250305163753.34913-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: aggregator: protect driver attr handlers against module unload 2025-03-13T11:53:12+00:00 Koichiro Den koichiro.den@canonical.com 2025-02-24T14:31:26+00:00 9334c88fc2fbc6836b307d269fcc1744c69701c0 commit 12f65d1203507f7db3ba59930fe29a3b8eee9945 upstream. Both new_device_store and delete_device_store touch module global resources (e.g. gpio_aggregator_lock). To prevent race conditions with module unload, a reference needs to be held. Add try_module_get() in these handlers. For new_device_store, this eliminates what appears to be the most dangerous scenario: if an id is allocated from gpio_aggregator_idr but platform_device_register has not yet been called or completed, a concurrent module unload could fail to unregister/delete the device, leaving behind a dangling platform device/GPIO forwarder. This can result in various issues. The following simple reproducer demonstrates these problems: #!/bin/bash while :; do # note: whether 'gpiochip0 0' exists or not does not matter. echo 'gpiochip0 0' > /sys/bus/platform/drivers/gpio-aggregator/new_device done & while :; do modprobe gpio-aggregator modprobe -r gpio-aggregator done & wait Starting with the following warning, several kinds of warnings will appear and the system may become unstable: ------------[ cut here ]------------ list_del corruption, ffff888103e2e980->next is LIST_POISON1 (dead000000000100) WARNING: CPU: 1 PID: 1327 at lib/list_debug.c:56 __list_del_entry_valid_or_report+0xa3/0x120 [...] RIP: 0010:__list_del_entry_valid_or_report+0xa3/0x120 [...] Call Trace: <TASK> ? __list_del_entry_valid_or_report+0xa3/0x120 ? __warn.cold+0x93/0xf2 ? __list_del_entry_valid_or_report+0xa3/0x120 ? report_bug+0xe6/0x170 ? __irq_work_queue_local+0x39/0xe0 ? handle_bug+0x58/0x90 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? __list_del_entry_valid_or_report+0xa3/0x120 gpiod_remove_lookup_table+0x22/0x60 new_device_store+0x315/0x350 [gpio_aggregator] kernfs_fop_write_iter+0x137/0x1f0 vfs_write+0x262/0x430 ksys_write+0x60/0xd0 do_syscall_64+0x6c/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] </TASK> ---[ end trace 0000000000000000 ]--- Fixes: 828546e24280 ("gpio: Add GPIO Aggregator") Cc: stable@vger.kernel.org Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250224143134.3024598-2-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 12f65d1203507f7db3ba59930fe29a3b8eee9945 upstream.

Both new_device_store and delete_device_store touch module global
resources (e.g. gpio_aggregator_lock). To prevent race conditions with
module unload, a reference needs to be held.

Add try_module_get() in these handlers.

For new_device_store, this eliminates what appears to be the most dangerous
scenario: if an id is allocated from gpio_aggregator_idr but
platform_device_register has not yet been called or completed, a concurrent
module unload could fail to unregister/delete the device, leaving behind a
dangling platform device/GPIO forwarder. This can result in various issues.
The following simple reproducer demonstrates these problems:

  #!/bin/bash
  while :; do
    # note: whether 'gpiochip0 0' exists or not does not matter.
    echo 'gpiochip0 0' > /sys/bus/platform/drivers/gpio-aggregator/new_device
  done &
  while :; do
    modprobe gpio-aggregator
    modprobe -r gpio-aggregator
  done &
  wait

  Starting with the following warning, several kinds of warnings will appear
  and the system may become unstable:

  ------------[ cut here ]------------
  list_del corruption, ffff888103e2e980->next is LIST_POISON1 (dead000000000100)
  WARNING: CPU: 1 PID: 1327 at lib/list_debug.c:56 __list_del_entry_valid_or_report+0xa3/0x120
  [...]
  RIP: 0010:__list_del_entry_valid_or_report+0xa3/0x120
  [...]
  Call Trace:
   <TASK>
   ? __list_del_entry_valid_or_report+0xa3/0x120
   ? __warn.cold+0x93/0xf2
   ? __list_del_entry_valid_or_report+0xa3/0x120
   ? report_bug+0xe6/0x170
   ? __irq_work_queue_local+0x39/0xe0
   ? handle_bug+0x58/0x90
   ? exc_invalid_op+0x13/0x60
   ? asm_exc_invalid_op+0x16/0x20
   ? __list_del_entry_valid_or_report+0xa3/0x120
   gpiod_remove_lookup_table+0x22/0x60
   new_device_store+0x315/0x350 [gpio_aggregator]
   kernfs_fop_write_iter+0x137/0x1f0
   vfs_write+0x262/0x430
   ksys_write+0x60/0xd0
   do_syscall_64+0x6c/0x180
   entry_SYSCALL_64_after_hwframe+0x76/0x7e
   [...]
   </TASK>
  ---[ end trace 0000000000000000 ]---

Fixes: 828546e24280 ("gpio: Add GPIO Aggregator")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250224143134.3024598-2-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: rcar: Use raw_spinlock to protect register access 2025-03-13T11:53:12+00:00 Niklas Söderlund niklas.soderlund+renesas@ragnatech.se 2025-01-21T13:58:33+00:00 3e300913c42041e81c5b17a970c4e078086ff2d1 commit f02c41f87cfe61440c18bf77d1ef0a884b9ee2b5 upstream. Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. The lock is only used to serialize register access. [ 4.239592] ============================= [ 4.239595] [ BUG: Invalid wait context ] [ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted [ 4.239603] ----------------------------- [ 4.239606] kworker/u8:5/76 is trying to lock: [ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.239641] other info that might help us debug this: [ 4.239643] context-{5:5} [ 4.239646] 5 locks held by kworker/u8:5/76: [ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c [ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value. [ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c [ 4.254109] #2: ffff00000920c8f8 [ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value. [ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc [ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690 [ 4.264840] #4: [ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value. [ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690 [ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.304082] stack backtrace: [ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 [ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 4.304097] Workqueue: async async_run_entry_fn [ 4.304106] Call trace: [ 4.304110] show_stack+0x14/0x20 (C) [ 4.304122] dump_stack_lvl+0x6c/0x90 [ 4.304131] dump_stack+0x14/0x1c [ 4.304138] __lock_acquire+0xdfc/0x1584 [ 4.426274] lock_acquire+0x1c4/0x33c [ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80 [ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8 [ 4.444422] __irq_set_trigger+0x5c/0x178 [ 4.448435] __setup_irq+0x2e4/0x690 [ 4.452012] request_threaded_irq+0xc4/0x190 [ 4.456285] devm_request_threaded_irq+0x7c/0xf4 [ 4.459398] ata1: link resume succeeded after 1 retries [ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0 [ 4.470660] mmc_start_host+0x50/0xac [ 4.474327] mmc_add_host+0x80/0xe4 [ 4.477817] tmio_mmc_host_probe+0x2b0/0x440 [ 4.482094] renesas_sdhi_probe+0x488/0x6f4 [ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78 [ 4.491509] platform_probe+0x64/0xd8 [ 4.495178] really_probe+0xb8/0x2a8 [ 4.498756] __driver_probe_device+0x74/0x118 [ 4.503116] driver_probe_device+0x3c/0x154 [ 4.507303] __device_attach_driver+0xd4/0x160 [ 4.511750] bus_for_each_drv+0x84/0xe0 [ 4.515588] __device_attach_async_helper+0xb0/0xdc [ 4.520470] async_run_entry_fn+0x30/0xd8 [ 4.524481] process_one_work+0x210/0x62c [ 4.528494] worker_thread+0x1ac/0x340 [ 4.532245] kthread+0x10c/0x110 [ 4.535476] ret_from_fork+0x10/0x20 Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250121135833.3769310-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f02c41f87cfe61440c18bf77d1ef0a884b9ee2b5 upstream.

Use raw_spinlock in order to fix spurious messages about invalid context
when spinlock debugging is enabled. The lock is only used to serialize
register access.

    [    4.239592] =============================
    [    4.239595] [ BUG: Invalid wait context ]
    [    4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted
    [    4.239603] -----------------------------
    [    4.239606] kworker/u8:5/76 is trying to lock:
    [    4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164
    [    4.239641] other info that might help us debug this:
    [    4.239643] context-{5:5}
    [    4.239646] 5 locks held by kworker/u8:5/76:
    [    4.239651]  #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c
    [    4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value.
    [    4.254094]  #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c
    [    4.254109]  #2: ffff00000920c8f8
    [    4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value.
    [    4.264803]  (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc
    [    4.264820]  #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690
    [    4.264840]  #4:
    [    4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value.
    [    4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690
    [    4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz
    [    4.304082] stack backtrace:
    [    4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35
    [    4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
    [    4.304097] Workqueue: async async_run_entry_fn
    [    4.304106] Call trace:
    [    4.304110]  show_stack+0x14/0x20 (C)
    [    4.304122]  dump_stack_lvl+0x6c/0x90
    [    4.304131]  dump_stack+0x14/0x1c
    [    4.304138]  __lock_acquire+0xdfc/0x1584
    [    4.426274]  lock_acquire+0x1c4/0x33c
    [    4.429942]  _raw_spin_lock_irqsave+0x5c/0x80
    [    4.434307]  gpio_rcar_config_interrupt_input_mode+0x34/0x164
    [    4.440061]  gpio_rcar_irq_set_type+0xd4/0xd8
    [    4.444422]  __irq_set_trigger+0x5c/0x178
    [    4.448435]  __setup_irq+0x2e4/0x690
    [    4.452012]  request_threaded_irq+0xc4/0x190
    [    4.456285]  devm_request_threaded_irq+0x7c/0xf4
    [    4.459398] ata1: link resume succeeded after 1 retries
    [    4.460902]  mmc_gpiod_request_cd_irq+0x68/0xe0
    [    4.470660]  mmc_start_host+0x50/0xac
    [    4.474327]  mmc_add_host+0x80/0xe4
    [    4.477817]  tmio_mmc_host_probe+0x2b0/0x440
    [    4.482094]  renesas_sdhi_probe+0x488/0x6f4
    [    4.486281]  renesas_sdhi_internal_dmac_probe+0x60/0x78
    [    4.491509]  platform_probe+0x64/0xd8
    [    4.495178]  really_probe+0xb8/0x2a8
    [    4.498756]  __driver_probe_device+0x74/0x118
    [    4.503116]  driver_probe_device+0x3c/0x154
    [    4.507303]  __device_attach_driver+0xd4/0x160
    [    4.511750]  bus_for_each_drv+0x84/0xe0
    [    4.515588]  __device_attach_async_helper+0xb0/0xdc
    [    4.520470]  async_run_entry_fn+0x30/0xd8
    [    4.524481]  process_one_work+0x210/0x62c
    [    4.528494]  worker_thread+0x1ac/0x340
    [    4.532245]  kthread+0x10c/0x110
    [    4.535476]  ret_from_fork+0x10/0x20

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250121135833.3769310-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: stmpe: Check return value of stmpe_reg_read in stmpe_gpio_irq_sync_unlock 2025-02-21T12:50:05+00:00 Wentao Liang vulab@iscas.ac.cn 2025-02-12T02:18:49+00:00 1819802e2931f977e5f18b3ecd3b34b3065a7826 commit b9644fbfbcab13da7f8b37bef7c51e5b8407d031 upstream. The stmpe_reg_read function can fail, but its return value is not checked in stmpe_gpio_irq_sync_unlock. This can lead to silent failures and incorrect behavior if the hardware access fails. This patch adds checks for the return value of stmpe_reg_read. If the function fails, an error message is logged and the function returns early to avoid further issues. Fixes: b888fb6f2a27 ("gpio: stmpe: i2c transfer are forbiden in atomic context") Cc: stable@vger.kernel.org # 4.16+ Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20250212021849.275-1-vulab@iscas.ac.cn Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b9644fbfbcab13da7f8b37bef7c51e5b8407d031 upstream.

The stmpe_reg_read function can fail, but its return value is not checked
in stmpe_gpio_irq_sync_unlock. This can lead to silent failures and
incorrect behavior if the hardware access fails.

This patch adds checks for the return value of stmpe_reg_read. If the
function fails, an error message is logged and the function returns
early to avoid further issues.

Fixes: b888fb6f2a27 ("gpio: stmpe: i2c transfer are forbiden in atomic context")
Cc: stable@vger.kernel.org # 4.16+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250212021849.275-1-vulab@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>