linux-stable.git/drivers/gpio, branch v5.4.78 Linux kernel stable tree gpio: pcie-idio-24: Enable PEX8311 interrupts 2020-11-18T18:20:31+00:00 Arnaud de Turckheim quarium@gmail.com 2020-11-04T15:24:55+00:00 2a6cba6d3d72e9c4c4e5303715f49f8f03189137 commit 10a2f11d3c9e48363c729419e0f0530dea76e4fe upstream. This enables the PEX8311 internal PCI wire interrupt and the PEX8311 local interrupt input so the local interrupts are forwarded to the PCI. Fixes: 585562046628 ("gpio: Add GPIO support for the ACCES PCIe-IDIO-24 family") Cc: stable@vger.kernel.org Signed-off-by: Arnaud de Turckheim <quarium@gmail.com> Reviewed-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 10a2f11d3c9e48363c729419e0f0530dea76e4fe upstream.

This enables the PEX8311 internal PCI wire interrupt and the PEX8311
local interrupt input so the local interrupts are forwarded to the PCI.

Fixes: 585562046628 ("gpio: Add GPIO support for the ACCES PCIe-IDIO-24 family")
Cc: stable@vger.kernel.org
Signed-off-by: Arnaud de Turckheim <quarium@gmail.com>
Reviewed-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: pcie-idio-24: Fix IRQ Enable Register value 2020-11-18T18:20:31+00:00 Arnaud de Turckheim quarium@gmail.com 2020-11-04T15:24:54+00:00 7b6790ae3a94654565695c76aab65f3f5db67639 commit 23a7fdc06ebcc334fa667f0550676b035510b70b upstream. This fixes the COS Enable Register value for enabling/disabling the corresponding IRQs bank. Fixes: 585562046628 ("gpio: Add GPIO support for the ACCES PCIe-IDIO-24 family") Cc: stable@vger.kernel.org Signed-off-by: Arnaud de Turckheim <quarium@gmail.com> Reviewed-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 23a7fdc06ebcc334fa667f0550676b035510b70b upstream.

This fixes the COS Enable Register value for enabling/disabling the
corresponding IRQs bank.

Fixes: 585562046628 ("gpio: Add GPIO support for the ACCES PCIe-IDIO-24 family")
Cc: stable@vger.kernel.org
Signed-off-by: Arnaud de Turckheim <quarium@gmail.com>
Reviewed-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: pcie-idio-24: Fix irq mask when masking 2020-11-18T18:20:31+00:00 Arnaud de Turckheim quarium@gmail.com 2020-11-04T15:24:53+00:00 819bf3b0d969ea91dd33e06271df2e3349923f20 commit d8f270efeac850c569c305dc0baa42ac3d607988 upstream. Fix the bitwise operation to remove only the corresponding bit from the mask. Fixes: 585562046628 ("gpio: Add GPIO support for the ACCES PCIe-IDIO-24 family") Cc: stable@vger.kernel.org Signed-off-by: Arnaud de Turckheim <quarium@gmail.com> Reviewed-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d8f270efeac850c569c305dc0baa42ac3d607988 upstream.

Fix the bitwise operation to remove only the corresponding bit from the
mask.

Fixes: 585562046628 ("gpio: Add GPIO support for the ACCES PCIe-IDIO-24 family")
Cc: stable@vger.kernel.org
Signed-off-by: Arnaud de Turckheim <quarium@gmail.com>
Reviewed-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: aspeed: fix ast2600 bank properties 2020-10-07T06:01:29+00:00 Tao Ren rentao.bupt@gmail.com 2020-09-16T20:42:16+00:00 811ac052e26425ee9f98d476642a3d1d1be8dd1d [ Upstream commit 3e640b1eec38e4c8eba160f26cba4f592e657f3d ] GPIO_U is mapped to the least significant byte of input/output mask, and the byte in "output" mask should be 0 because GPIO_U is input only. All the other bits need to be 1 because GPIO_V/W/X support both input and output modes. Similarly, GPIO_Y/Z are mapped to the 2 least significant bytes, and the according bits need to be 1 because GPIO_Y/Z support both input and output modes. Fixes: ab4a85534c3e ("gpio: aspeed: Add in ast2600 details to Aspeed driver") Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3e640b1eec38e4c8eba160f26cba4f592e657f3d ]

GPIO_U is mapped to the least significant byte of input/output mask, and
the byte in "output" mask should be 0 because GPIO_U is input only. All
the other bits need to be 1 because GPIO_V/W/X support both input and
output modes.

Similarly, GPIO_Y/Z are mapped to the 2 least significant bytes, and the
according bits need to be 1 because GPIO_Y/Z support both input and
output modes.

Fixes: ab4a85534c3e ("gpio: aspeed: Add in ast2600 details to Aspeed driver")
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio/aspeed-sgpio: don't enable all interrupts by default 2020-10-07T06:01:28+00:00 Jeremy Kerr jk@codeconstruct.com.au 2020-09-11T01:51:05+00:00 f2a2380812c6e295f6fe3169dd53d1dfdf20f659 [ Upstream commit bf0d394e885015941ed2d5724c0a6ed8d42dd95e ] Currently, the IRQ setup for the SGPIO driver enables all interrupts in dual-edge trigger mode. Since the default handler is handle_bad_irq, any state change on input GPIOs will trigger bad IRQ warnings. This change applies sensible IRQ defaults: single-edge trigger, and all IRQs disabled. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Fixes: 7db47faae79b ("gpio: aspeed: Add SGPIO driver") Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit bf0d394e885015941ed2d5724c0a6ed8d42dd95e ]

Currently, the IRQ setup for the SGPIO driver enables all interrupts in
dual-edge trigger mode. Since the default handler is handle_bad_irq, any
state change on input GPIOs will trigger bad IRQ warnings.

This change applies sensible IRQ defaults: single-edge trigger, and all
IRQs disabled.

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Fixes: 7db47faae79b ("gpio: aspeed: Add SGPIO driver")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio/aspeed-sgpio: enable access to all 80 input & output sgpios 2020-10-07T06:01:28+00:00 Jeremy Kerr jk@codeconstruct.com.au 2020-09-11T01:51:04+00:00 8323d1e09037fb712542063fa3223dde5a71b345 [ Upstream commit ac67b07e268d46eba675a60c37051bb3e59fd201 ] Currently, the aspeed-sgpio driver exposes up to 80 GPIO lines, corresponding to the 80 status bits available in hardware. Each of these lines can be configured as either an input or an output. However, each of these GPIOs is actually an input *and* an output; we actually have 80 inputs plus 80 outputs. This change expands the maximum number of GPIOs to 160; the lower half of this range are the input-only GPIOs, the upper half are the outputs. We fix the GPIO directions to correspond to this mapping. This also fixes a bug when setting GPIOs - we were reading from the input register, making it impossible to set more than one output GPIO. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Fixes: 7db47faae79b ("gpio: aspeed: Add SGPIO driver") Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ac67b07e268d46eba675a60c37051bb3e59fd201 ]

Currently, the aspeed-sgpio driver exposes up to 80 GPIO lines,
corresponding to the 80 status bits available in hardware. Each of these
lines can be configured as either an input or an output.

However, each of these GPIOs is actually an input *and* an output; we
actually have 80 inputs plus 80 outputs.

This change expands the maximum number of GPIOs to 160; the lower half
of this range are the input-only GPIOs, the upper half are the outputs.
We fix the GPIO directions to correspond to this mapping.

This also fixes a bug when setting GPIOs - we were reading from the
input register, making it impossible to set more than one output GPIO.

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Fixes: 7db47faae79b ("gpio: aspeed: Add SGPIO driver")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: sprd: Clear interrupt when setting the type as edge 2020-10-07T06:01:27+00:00 Taiping Lai taiping.lai@unisoc.com 2020-08-31T09:09:47+00:00 543ea1af57444a06fdb73873cbd2580a3cd891c4 [ Upstream commit 5fcface659aab7eac4bd65dd116d98b8f7bb88d5 ] The raw interrupt status of GPIO maybe set before the interrupt is enabled, which would trigger the interrupt event once enabled it from user side. This is the case for edge interrupts only. Adding a clear operation when setting interrupt type can avoid that. There're a few considerations for the solution: 1) This issue is for edge interrupt only; The interrupts requested by users are IRQ_TYPE_LEVEL_HIGH as default, so clearing interrupt when request is useless. 2) The interrupt type can be set to edge when request and following up with clearing it though, but the problem is still there once users set the interrupt type to level trggier. 3) We can add a clear operation after each time of setting interrupt enable bit, but it is redundant for level trigger interrupt. Therefore, the solution is this patch seems the best for now. Fixes: 9a3821c2bb47 ("gpio: Add GPIO driver for Spreadtrum SC9860 platform") Signed-off-by: Taiping Lai <taiping.lai@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5fcface659aab7eac4bd65dd116d98b8f7bb88d5 ]

The raw interrupt status of GPIO maybe set before the interrupt is enabled,
which would trigger the interrupt event once enabled it from user side.
This is the case for edge interrupts only. Adding a clear operation when
setting interrupt type can avoid that.

There're a few considerations for the solution:
1) This issue is for edge interrupt only; The interrupts requested by users
   are IRQ_TYPE_LEVEL_HIGH as default, so clearing interrupt when request
   is useless.
2) The interrupt type can be set to edge when request and following up
   with clearing it though, but the problem is still there once users set
   the interrupt type to level trggier.
3) We can add a clear operation after each time of setting interrupt
   enable bit, but it is redundant for level trigger interrupt.

Therefore, the solution is this patch seems the best for now.

Fixes: 9a3821c2bb47 ("gpio: Add GPIO driver for Spreadtrum SC9860 platform")
Signed-off-by: Taiping Lai <taiping.lai@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: tc35894: fix up tc35894 interrupt configuration 2020-10-07T06:01:24+00:00 dillon min dillon.minfei@gmail.com 2020-09-03T07:30:21+00:00 79c8ebdce55c98996ad1697352ccc1318b39f7ca commit 214b0e1ad01abf4c1f6d8d28fa096bf167e47cef upstream. The offset of regmap is incorrect, j * 8 is move to the wrong register. for example: asume i = 0, j = 1. we want to set KPY5 as interrupt falling edge mode, regmap[0][1] should be TC3589x_GPIOIBE1 0xcd but, regmap[i] + j * 8 = TC3589x_GPIOIBE0 + 8 ,point to 0xd4, this is TC3589x_GPIOIE2 not TC3589x_GPIOIBE1. Fixes: d88b25be3584 ("gpio: Add TC35892 GPIO driver") Cc: Cc: stable@vger.kernel.org Signed-off-by: dillon min <dillon.minfei@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 214b0e1ad01abf4c1f6d8d28fa096bf167e47cef upstream.

The offset of regmap is incorrect, j * 8 is move to the
wrong register.

for example:

asume i = 0, j = 1. we want to set KPY5 as interrupt
falling edge mode, regmap[0][1] should be TC3589x_GPIOIBE1 0xcd
but, regmap[i] + j * 8 = TC3589x_GPIOIBE0 + 8 ,point to 0xd4,
this is TC3589x_GPIOIE2 not TC3589x_GPIOIBE1.

Fixes: d88b25be3584 ("gpio: Add TC35892 GPIO driver")
Cc: Cc: stable@vger.kernel.org
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: mockup: fix resource leak in error path 2020-10-07T06:01:24+00:00 Bartosz Golaszewski bgolaszewski@baylibre.com 2020-09-08T13:07:49+00:00 035f59ad4ba875c86cf9613905d828ac0da053ee commit 1b02d9e770cd7087f34c743f85ccf5ea8372b047 upstream. If the module init function fails after creating the debugs directory, it's never removed. Add proper cleanup calls to avoid this resource leak. Fixes: 9202ba2397d1 ("gpio: mockup: implement event injecting over debugfs") Cc: <stable@vger.kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1b02d9e770cd7087f34c743f85ccf5ea8372b047 upstream.

If the module init function fails after creating the debugs directory,
it's never removed. Add proper cleanup calls to avoid this resource
leak.

Fixes: 9202ba2397d1 ("gpio: mockup: implement event injecting over debugfs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: siox: explicitly support only threaded irqs 2020-10-07T06:01:23+00:00 Ahmad Fatoum a.fatoum@pengutronix.de 2020-09-07T15:31:35+00:00 b079337f697aa6fcb3be991a68bb0f849ea1cd57 commit 45ccf6556720293323c20cda717756014ff63007 upstream. The gpio-siox driver uses handle_nested_irq() to implement its interrupt support. This is only capable of handling threaded irq actions. For a hardirq action it triggers a NULL pointer oops. (It calls action->thread_fn which is NULL then.) Prevent registration of a hardirq action by setting gpio_irq_chip::threaded to true. Cc: u.kleine-koenig@pengutronix.de Fixes: be8c8facc707 ("gpio: new driver to work with a 8x12 siox") Cc: stable@vger.kernel.org Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 45ccf6556720293323c20cda717756014ff63007 upstream.

The gpio-siox driver uses handle_nested_irq() to implement its
interrupt support. This is only capable of handling threaded irq
actions. For a hardirq action it triggers a NULL pointer oops.
(It calls action->thread_fn which is NULL then.)

Prevent registration of a hardirq action by setting
gpio_irq_chip::threaded to true.

Cc: u.kleine-koenig@pengutronix.de
Fixes: be8c8facc707 ("gpio: new driver to work with a 8x12 siox")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>