linux-stable.git/drivers/gpio, branch v5.4.129 Linux kernel stable tree gpio: cadence: Add missing MODULE_DEVICE_TABLE 2021-06-03T06:59:08+00:00 Zou Wei zou_wei@huawei.com 2021-05-12T03:17:47+00:00 e44a9941937d330220f7ef3e0e0aeed90dd924c4 [ Upstream commit 1e948b1752b58c9c570989ab29ceef5b38fdccda ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1e948b1752b58c9c570989ab29ceef5b38fdccda ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055 2021-05-22T09:38:29+00:00 Hans de Goede hdegoede@redhat.com 2021-04-01T16:27:40+00:00 0ce1a72ac9b0bee46022a8abb4cf60f905efa0bf [ Upstream commit da91ece226729c76f60708efc275ebd4716ad089 ] Like some other Bay and Cherry Trail SoC based devices the Dell Venue 10 Pro 5055 has an embedded-controller which uses ACPI GPIO events to report events instead of using the standard ACPI EC interface for this. The EC interrupt is only used to report battery-level changes and it keeps doing this while the system is suspended, causing the system to not stay suspended. Add an ignore-wake quirk for the GPIO pin used by the EC to fix the spurious wakeups from suspend. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit da91ece226729c76f60708efc275ebd4716ad089 ]

Like some other Bay and Cherry Trail SoC based devices the Dell Venue
10 Pro 5055 has an embedded-controller which uses ACPI GPIO events to
report events instead of using the standard ACPI EC interface for this.

The EC interrupt is only used to report battery-level changes and
it keeps doing this while the system is suspended, causing the system
to not stay suspended.

Add an ignore-wake quirk for the GPIO pin used by the EC to fix the
spurious wakeups from suspend.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: omap: Save and restore sysconfig 2021-04-28T11:19:14+00:00 Tony Lindgren tony@atomide.com 2021-04-17T08:38:39+00:00 dbb355960ef9c12caac7a0694cc4376a4f3314fd [ Upstream commit ddd8d94ca31e768c76cf8bfe34ba7b10136b3694 ] As we are using cpu_pm to save and restore context, we must also save and restore the GPIO sysconfig register. This is needed because we are not calling PM runtime functions at all with cpu_pm. We need to save the sysconfig on idle as it's value can get reconfigured by PM runtime and can be different from the init time value. Device specific flags like "ti,no-idle-on-init" can affect the init value. Fixes: b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead") Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Adam Ford <aford173@gmail.com> Cc: Andreas Kemnade <andreas@kemnade.info> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ddd8d94ca31e768c76cf8bfe34ba7b10136b3694 ]

As we are using cpu_pm to save and restore context, we must also save and
restore the GPIO sysconfig register. This is needed because we are not
calling PM runtime functions at all with cpu_pm.

We need to save the sysconfig on idle as it's value can get reconfigured by
PM runtime and can be different from the init time value. Device specific
flags like "ti,no-idle-on-init" can affect the init value.

Fixes: b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead")
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: sysfs: Obey valid_mask 2021-04-21T10:56:13+00:00 Matti Vaittinen matti.vaittinen@fi.rohmeurope.com 2021-03-29T11:41:12+00:00 5130cda3cb1fcc5f4e5c08ff3fba87171c5b3c80 [ Upstream commit 23cf00ddd2e1aacf1873e43f5e0c519c120daf7a ] Do not allow exporting GPIOs which are set invalid by the driver's valid mask. Fixes: 726cb3ba4969 ("gpiolib: Support 'gpio-reserved-ranges' property") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 23cf00ddd2e1aacf1873e43f5e0c519c120daf7a ]

Do not allow exporting GPIOs which are set invalid
by the driver's valid mask.

Fixes: 726cb3ba4969 ("gpiolib: Support 'gpio-reserved-ranges' property")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpiolib: acpi: Add missing IRQF_ONESHOT 2021-03-30T12:35:21+00:00 Yang Li yang.lee@linux.alibaba.com 2021-02-23T08:35:58+00:00 d605afb11945e74fee7a9fd1b552ef7e1af7423b [ Upstream commit 6e5d5791730b55a1f987e1db84b078b91eb49e99 ] fixed the following coccicheck: ./drivers/gpio/gpiolib-acpi.c:176:7-27: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Make sure threaded IRQs without a primary handler are always request with IRQF_ONESHOT Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6e5d5791730b55a1f987e1db84b078b91eb49e99 ]

fixed the following coccicheck:
./drivers/gpio/gpiolib-acpi.c:176:7-27: ERROR: Threaded IRQ with no
primary handler requested without IRQF_ONESHOT

Make sure threaded IRQs without a primary handler are always request
with IRQF_ONESHOT

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
gpio: pcf857x: Fix missing first interrupt 2021-03-04T09:26:49+00:00 Maxim Kiselev bigunclemax@gmail.com 2021-02-17T13:10:00+00:00 81c2472bcf33548beb47f9c38a142a99cc6a07b1 commit a8002a35935aaefcd6a42ad3289f62bab947f2ca upstream. If no n_latch value will be provided at driver probe then all pins will be used as an input: gpio->out = ~n_latch; In that case initial state for all pins is "one": gpio->status = gpio->out; So if pcf857x IRQ happens with change pin value from "zero" to "one" then we miss it, because of "one" from IRQ and "one" from initial state leaves corresponding pin unchanged: change = (gpio->status ^ status) & gpio->irq_enabled; The right solution will be to read actual state at driver probe. Cc: stable@vger.kernel.org Fixes: 6e20a0a429bd ("gpio: pcf857x: enable gpio_to_irq() support") Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a8002a35935aaefcd6a42ad3289f62bab947f2ca upstream.

If no n_latch value will be provided at driver probe then all pins will
be used as an input:

    gpio->out = ~n_latch;

In that case initial state for all pins is "one":

    gpio->status = gpio->out;

So if pcf857x IRQ happens with change pin value from "zero" to "one"
then we miss it, because of "one" from IRQ and "one" from initial state
leaves corresponding pin unchanged:
change = (gpio->status ^ status) & gpio->irq_enabled;

The right solution will be to read actual state at driver probe.

Cc: stable@vger.kernel.org
Fixes: 6e20a0a429bd ("gpio: pcf857x: enable gpio_to_irq() support")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: ep93xx: Fix single irqchip with multi gpiochips 2021-02-17T09:35:14+00:00 Nikita Shubin nikita.shubin@maquefel.me 2021-02-09T13:31:05+00:00 4851d7b340e90953cd778681d7b7f3d650d6a882 commit 28dc10eb77a2db7681b08e3b109764bbe469e347 upstream. Fixes the following warnings which results in interrupts disabled on port B/F: gpio gpiochip1: (B): detected irqchip that is shared with multiple gpiochips: please fix the driver. gpio gpiochip5: (F): detected irqchip that is shared with multiple gpiochips: please fix the driver. - added separate irqchip for each interrupt capable gpiochip - provided unique names for each irqchip Fixes: d2b091961510 ("gpio: ep93xx: Pass irqchip when adding gpiochip") Cc: <stable@vger.kernel.org> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 28dc10eb77a2db7681b08e3b109764bbe469e347 upstream.

Fixes the following warnings which results in interrupts disabled on
port B/F:

gpio gpiochip1: (B): detected irqchip that is shared with multiple gpiochips: please fix the driver.
gpio gpiochip5: (F): detected irqchip that is shared with multiple gpiochips: please fix the driver.

- added separate irqchip for each interrupt capable gpiochip
- provided unique names for each irqchip

Fixes: d2b091961510 ("gpio: ep93xx: Pass irqchip when adding gpiochip")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: ep93xx: fix BUG_ON port F usage 2021-02-17T09:35:14+00:00 Nikita Shubin nikita.shubin@maquefel.me 2021-02-09T13:31:04+00:00 2c5abe0f8e9c88339d138d7b6dcd7bdf1bf4352e commit 8b81a7ab8055d01d827ef66374b126eeac3bd108 upstream. Two index spaces and ep93xx_gpio_port are confusing. Instead add a separate struct to store necessary data and remove ep93xx_gpio_port. - add struct to store IRQ related data for each IRQ capable chip - replace offset array with defined offsets - add IRQ registers offset for each IRQ capable chip into ep93xx_gpio_banks ------------[ cut here ]------------ kernel BUG at drivers/gpio/gpio-ep93xx.c:64! ---[ end trace 3f6544e133e9f5ae ]--- Fixes: fd935fc421e74 ("gpio: ep93xx: Do not pingpong irq numbers") Cc: <stable@vger.kernel.org> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8b81a7ab8055d01d827ef66374b126eeac3bd108 upstream.

Two index spaces and ep93xx_gpio_port are confusing.

Instead add a separate struct to store necessary data and remove
ep93xx_gpio_port.

- add struct to store IRQ related data for each IRQ capable chip
- replace offset array with defined offsets
- add IRQ registers offset for each IRQ capable chip into
  ep93xx_gpio_banks

------------[ cut here ]------------
kernel BUG at drivers/gpio/gpio-ep93xx.c:64!
---[ end trace 3f6544e133e9f5ae ]---

Fixes: fd935fc421e74 ("gpio: ep93xx: Do not pingpong irq numbers")
Cc: <stable@vger.kernel.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: mvebu: fix pwm .get_state period calculation 2021-01-30T12:54:09+00:00 Baruch Siach baruch@tkos.co.il 2021-01-17T13:17:02+00:00 4afd772371d98e7569e26286c217db34479bb82b commit e73b0101ae5124bf7cd3fb5d250302ad2f16a416 upstream. The period is the sum of on and off values. That is, calculate period as ($on + $off) / clkrate instead of $off / clkrate - $on / clkrate that makes no sense. Reported-by: Russell King <linux@armlinux.org.uk> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 757642f9a584e ("gpio: mvebu: Add limited PWM support") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [baruch: backport to kernels <= v5.10] Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e73b0101ae5124bf7cd3fb5d250302ad2f16a416 upstream.

The period is the sum of on and off values. That is, calculate period as

  ($on + $off) / clkrate

instead of

  $off / clkrate - $on / clkrate

that makes no sense.

Reported-by: Russell King <linux@armlinux.org.uk>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 757642f9a584e ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[baruch: backport to kernels <= v5.10]
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: eic-sprd: break loop when getting NULL device resource 2020-12-30T10:50:55+00:00 Chunyan Zhang chunyan.zhang@unisoc.com 2020-12-09T05:51:06+00:00 0a652b181d757c0ed88fc781b60e112e3f70af4b [ Upstream commit 263ade7166a2e589c5b605272690c155c0637dcb ] EIC controller have unfixed numbers of banks on different Spreadtrum SoCs, and each bank has its own base address, the loop of getting there base address in driver should break if the resource gotten via platform_get_resource() is NULL already. The later ones would be all NULL even if the loop continues. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20201209055106.840100-1-zhang.lyra@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 263ade7166a2e589c5b605272690c155c0637dcb ]

EIC controller have unfixed numbers of banks on different Spreadtrum SoCs,
and each bank has its own base address, the loop of getting there base
address in driver should break if the resource gotten via
platform_get_resource() is NULL already. The later ones would be all NULL
even if the loop continues.

Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20201209055106.840100-1-zhang.lyra@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>