linux-stable.git/drivers/gpio, branch v5.0.4 Linux kernel stable tree gpio: pca953x: Fix dereference of irq data in shutdown 2019-03-23T19:11:25+00:00 Mark Walton mark.walton@serialtek.com 2019-02-28T15:46:36+00:00 ef2dfe6f8c82f427531b7556e2ee1b65f1301543 commit c378b3aa015931a46c91d6ccc2fe04d97801d060 upstream. If a PCA953x gpio was used as an interrupt and then released, the shutdown function was trying to extract the pca953x_chip pointer directly from the irq_data, but in reality was getting the gpio_chip structure. The net effect was that the subsequent writes to the data structure corrupted data in the gpio_chip structure, which wasn't immediately obvious until attempting to use the GPIO again in the future, at which point the kernel panics. This fix correctly extracts the pca953x_chip structure via the gpio_chip structure, as is correctly done in the other irq functions. Fixes: 0a70fe00efea ("gpio: pca953x: Clear irq trigger type on irq shutdown") Cc: stable@vger.kernel.org Signed-off-by: Mark Walton <mark.walton@serialtek.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c378b3aa015931a46c91d6ccc2fe04d97801d060 upstream.

If a PCA953x gpio was used as an interrupt and then released,
the shutdown function was trying to extract the pca953x_chip
pointer directly from the irq_data, but in reality was getting
the gpio_chip structure.

The net effect was that the subsequent writes to the data
structure corrupted data in the gpio_chip structure, which wasn't
immediately obvious until attempting to use the GPIO again in the
future, at which point the kernel panics.

This fix correctly extracts the pca953x_chip structure via the
gpio_chip structure, as is correctly done in the other irq
functions.

Fixes: 0a70fe00efea ("gpio: pca953x: Clear irq trigger type on irq shutdown")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Walton <mark.walton@serialtek.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2 2019-02-14T09:06:03+00:00 Lubomir Rintel lkundrak@v3.sk 2019-02-13T23:06:18+00:00 af14b2c98adb85e9517390bb88309338b9075350 Similarly to PXA3xx, pinctrl-single can't set pin direction on MMP2 either. See also: commit 9dabfdd84bdfa ("gpio: pxa: disable pinctrl calls for PXA3xx") Cc: stable@vger.kernel.org Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request") Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Similarly to PXA3xx, pinctrl-single can't set pin direction on MMP2 either.
See also: commit 9dabfdd84bdfa ("gpio: pxa: disable pinctrl calls for
PXA3xx")

Cc: stable@vger.kernel.org
Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: MT7621: use a per instance irq_chip structure 2019-02-08T11:30:15+00:00 René van Dorst opensource@vdorst.com 2019-01-30T16:10:49+00:00 fa84667b98fd1a191b2465d66b440bda6714b3bf This fixes the kernel complains: gpio gpiochip1: (1e000600.gpio-bank1): detected irqchip that is shared with multiple gpiochips: please fix the driver. gpio gpiochip2: (1e000600.gpio-bank2): detected irqchip that is shared with multiple gpiochips: please fix the driver. Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621") Cc: stable@vger.kernel.org Signed-off-by: René van Dorst <opensource@vdorst.com> Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Tested-by: Greg Ungerer <gerg@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
This fixes the kernel complains:
gpio gpiochip1: (1e000600.gpio-bank1): detected irqchip that is shared
	    with multiple gpiochips: please fix the driver.
gpio gpiochip2: (1e000600.gpio-bank2): detected irqchip that is shared
	    with multiple gpiochips: please fix the driver.

Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621")
Cc: stable@vger.kernel.org
Signed-off-by: René van Dorst <opensource@vdorst.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Tested-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: vf610: Mask all GPIO interrupts 2019-01-28T14:28:43+00:00 Andrew Lunn andrew@lunn.ch 2019-01-27T21:58:00+00:00 7ae710f9f8b2cf95297e7bbfe1c09789a7dc43d4 On SoC reset all GPIO interrupts are disable. However, if kexec is used to boot into a new kernel, the SoC does not experience a reset. Hence GPIO interrupts can be left enabled from the previous kernel. It is then possible for the interrupt to fire before an interrupt handler is registered, resulting in the kernel complaining of an "unexpected IRQ trap", the interrupt is never cleared, and so fires again, resulting in an interrupt storm. Disable all GPIO interrupts before registering the GPIO IRQ chip. Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
On SoC reset all GPIO interrupts are disable. However, if kexec is
used to boot into a new kernel, the SoC does not experience a
reset. Hence GPIO interrupts can be left enabled from the previous
kernel. It is then possible for the interrupt to fire before an
interrupt handler is registered, resulting in the kernel complaining
of an "unexpected IRQ trap", the interrupt is never cleared, and so
fires again, resulting in an interrupt storm.

Disable all GPIO interrupts before registering the GPIO IRQ chip.

Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: altera-a10sr: Set proper output level for direction_output 2019-01-23T16:24:02+00:00 Axel Lin axel.lin@ingics.com 2019-01-23T00:00:57+00:00 2095a45e345e669ea77a9b34bdd7de5ceb422f93 The altr_a10sr_gpio_direction_output should set proper output level based on the value argument. Fixes: 26a48c4cc2f1 ("gpio: altera-a10sr: Add A10 System Resource Chip GPIO support.") Cc: <stable@vger.kernel.org> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> 
The altr_a10sr_gpio_direction_output should set proper output level
based on the value argument.

Fixes: 26a48c4cc2f1 ("gpio: altera-a10sr: Add A10 System Resource Chip GPIO support.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested by: Thor Thayer <thor.thayer@linux.intel.com>
Reviewed by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpio: sprd: Fix incorrect irq type setting for the async EIC 2019-01-23T16:24:01+00:00 Neo Hou neo.hou@unisoc.com 2019-01-16T05:06:14+00:00 f785ffb61605734b518afa766d1b5445e9f38c8d When setting async EIC as IRQ_TYPE_EDGE_BOTH type, we missed to set the SPRD_EIC_ASYNC_INTMODE register to 0, which means detecting edge signals. Thus this patch fixes the issue. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Cc: <stable@vger.kernel.org> Signed-off-by: Neo Hou <neo.hou@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> 
When setting async EIC as IRQ_TYPE_EDGE_BOTH type, we missed to set the
SPRD_EIC_ASYNC_INTMODE register to 0, which means detecting edge signals.

Thus this patch fixes the issue.

Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Neo Hou <neo.hou@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpio: sprd: Fix the incorrect data register 2019-01-23T16:24:01+00:00 Neo Hou neo.hou@unisoc.com 2019-01-16T05:06:13+00:00 09d158d52d2bceda736797a61b6c13d7fc83707b Since differnt type EICs have its own data register to read, thus fix the incorrect data register. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Cc: <stable@vger.kernel.org> Signed-off-by: Neo Hou <neo.hou@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> 
Since differnt type EICs have its own data register to read, thus fix the
incorrect data register.

Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Neo Hou <neo.hou@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpiolib: fix line event timestamps for nested irqs 2019-01-23T16:24:01+00:00 Bartosz Golaszewski bgolaszewski@baylibre.com 2019-01-04T10:24:20+00:00 1033be58992f818dc564196ded2bcc3f360bc297 Nested interrupts run inside the calling thread's context and the top half handler is never called which means that we never read the timestamp. This issue came up when trying to read line events from a gpiochip using regmap_irq_chip for interrupts. Fix it by reading the timestamp from the irq thread function if it's still 0 by the time the second handler is called. Fixes: d58f2bf261fd ("gpio: Timestamp events in hardirq handler") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> 
Nested interrupts run inside the calling thread's context and the top
half handler is never called which means that we never read the
timestamp.

This issue came up when trying to read line events from a gpiochip
using regmap_irq_chip for interrupts.

Fix it by reading the timestamp from the irq thread function if it's
still 0 by the time the second handler is called.

Fixes: d58f2bf261fd ("gpio: Timestamp events in hardirq handler")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpio: pcf857x: Fix interrupts on multiple instances 2019-01-23T16:24:01+00:00 Roger Quadros rogerq@ti.com 2019-01-09T09:11:24+00:00 2486e67374aa8b7854c2de32869642c2873b3d53 When multiple instances of pcf857x chips are present, a fix up message [1] is printed during the probe of the 2nd and later instances. The issue is that the driver is using the same irq_chip data structure between multiple instances. Fix this by allocating the irq_chip data structure per instance. [1] fix up message addressed by this patch [ 1.212100] gpio gpiochip9: (pcf8575): detected irqchip that is shared with multiple gpiochips: please fix the driver. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> 
When multiple instances of pcf857x chips are present, a fix up
message [1] is printed during the probe of the 2nd and later
instances.

The issue is that the driver is using the same irq_chip data
structure between multiple instances.

Fix this by allocating the irq_chip data structure per instance.

[1] fix up message addressed by this patch
[    1.212100] gpio gpiochip9: (pcf8575): detected irqchip that is shared with multiple gpiochips: please fix the driver.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpio: pca953x: Make symbol 'pca953x_i2c_regmap' static 2019-01-11T08:16:40+00:00 Wei Yongjun weiyongjun1@huawei.com 2019-01-10T14:07:42+00:00 d04e779fb1dbeedf8a60b66d0d0048be4e65d366 Fixes the following sparse warning: drivers/gpio/gpio-pca953x.c:292:28: warning: symbol 'pca953x_i2c_regmap' was not declared. Should it be static? Fixes: 49427232764d ("gpio: pca953x: Perform basic regmap conversion") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Fixes the following sparse warning:

drivers/gpio/gpio-pca953x.c:292:28: warning:
 symbol 'pca953x_i2c_regmap' was not declared. Should it be static?

Fixes: 49427232764d ("gpio: pca953x: Perform basic regmap conversion")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>