linux-stable.git/drivers/gpio, branch v4.7.2

gpio: intel-mid: switch to devm_gpiochip_add_data()

2016-08-20T16:10:49+00:00

commit dd3b204af11b50be6dc77e18b88b3c646bba354c upstream.

The error handling is not correct since the commit 3f7dbfd8eea9 ("gpio:
intel-mid: switch to using gpiolib irqchip helpers"). Switch to devres API to
fix the potential resource leak.

Fixes: commit 3f7dbfd8eea9 ("gpio: intel-mid: switch to using gpiolib irqchip helpers")
Signed-off-by: Andy Shevchenko 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

gpio: intel-mid: Remove potentially harmful code

2016-08-20T16:10:49+00:00

commit 3dbd3212f81b2b410a34a922055e2da792864829 upstream.

The commit d56d6b3d7d69 ("gpio: langwell: add Intel Merrifield support")
doesn't look at all as a proper support for Intel Merrifield and I dare to say
that it distorts the behaviour of the hardware.

The register map is different on Intel Merrifield, i.e. only 6 out of 8
register have the same purpose but none of them has same location in the
address space. The current case potentially harmful to existing hardware since
it's poking registers on wrong offsets and may set some pin to be GPIO output
when connected hardware doesn't expect such.

Besides the above GPIO and pinctrl on Intel Merrifield have been located in
different IP blocks. The functionality has been extended as well, i.e. added
support of level interrupts, special registers for wake capable sources and
thus, in my opinion, requires a completele separate driver.

If someone wondering the existing gpio-intel-mid.c would be converted to actual
pinctrl (which by the fact it is now), though I wouldn't be a volunteer to do
that.

Fixes: d56d6b3d7d69 ("gpio: langwell: add Intel Merrifield support")
Signed-off-by: Andy Shevchenko 
Reviewed-by: Mika Westerberg 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

gpio: pca953x: Fix NBANK calculation for PCA9536

2016-08-20T16:10:49+00:00

commit a246b8198f776a16d1d3a3bbfc2d437bad766b29 upstream.

NBANK() macro assumes that ngpios is a multiple of 8(BANK_SZ) and
hence results in 0 banks for PCA9536 which has just 4 gpios. This is
wrong as PCA9356 has 1 bank with 4 gpios. This results in uninitialized
PCA953X_INVERT register. Fix this by using DIV_ROUND_UP macro in
NBANK().

Signed-off-by: Vignesh R 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

gpio: tegra: don't auto-enable for COMPILE_TEST

2016-07-22T13:29:32+00:00

I stumbled over a build error with COMPILE_TEST and CONFIG_OF
disabled:

drivers/gpio/gpio-tegra.c: In function 'tegra_gpio_probe':
drivers/gpio/gpio-tegra.c:603:9: error: 'struct gpio_chip' has no member named 'of_node'

The problem is that the newly added GPIO_TEGRA Kconfig symbol
does not have a dependency on CONFIG_OF. However, there is another
problem here as the driver gets enabled unconditionally whenever
COMPILE_TEST is set.

This fixes both problems, by making the symbol user-visible
when COMPILE_TEST is set and default-enabled for ARCH_TEGRA=y.

As a side-effect, it is now possible to compile-test a Tegra
kernel with GPIO support disabled, which is harmless.

Signed-off-by: Arnd Bergmann 
Fixes: 4dd4dd1d2120 ("gpio: tegra: Allow compile test")
Signed-off-by: Linus Walleij

Revert "gpio: gpiolib-of: Allow compile testing"

2016-07-05T17:03:04+00:00

This reverts commit 1e4a80640338924b9f9fd7a121ac31d08134410a.

This creates more problems than it solves right now. Compile
testing needs to go in with patches fixing the problems it
uncovers.

Signed-off-by: Linus Walleij

Revert "gpiolib: Split GPIO flags parsing and GPIO configuration"

2016-07-04T14:51:29+00:00

This reverts commit 923b93e451db876d1479d3e4458fce14fec31d1c.

Make sure consumers do not overwrite gpio flags for pins that have
already been claimed.

While adding support for gpio drivers to refuse a request using
unsupported flags, the order of when the requested flag was checked and
the new flags were applied was reversed to that consumers could
overwrite flags for already requested gpios.

This not only affects device-tree setups where two drivers could request
the same gpio using conflicting configurations, but also allowed user
space to clear gpio flags for already claimed pins simply by attempting
to export them through the sysfs interface. By for example clearing the
FLAG_ACTIVE_LOW flag this way, user space could effectively change the
polarity of a signal.

Reverting this change obviously prevents gpio drivers from doing sanity
checks on the flags in their request callbacks. Fortunately only one
recently added driver (gpio-tps65218 in v4.6) appears to do this, and a
follow up patch could restore this functionality through a different
interface.

Cc: stable 	# 4.4
Signed-off-by: Johan Hovold 
Signed-off-by: Linus Walleij

gpio: sch: Fix Oops on module load on Asus Eee PC 1201

2016-07-04T14:50:40+00:00

This fixes the issue descirbe in bug 117531
(https://bugzilla.kernel.org/show_bug.cgi?id=117531).
It's a regression introduced in linux 4.5 that causes a Oops at load of
gpio_sch and prevents powering off the computer.

The issue is that sch_gpio_reg_set is called in sch_gpio_probe before
gpio_chip data is initialized with the pointer to the sch_gpio struct. As
sch_gpio_reg_set calls gpiochip_get_data, it returns NULL which causes
the Oops.

The patch follows Mika's advice (https://lkml.org/lkml/2016/5/9/61) and
consists in modifying sch_gpio_reg_get and sch_gpio_reg_set to take a
sch_gpio struct directly instead of a gpio_chip, which avoids the call to
gpiochip_get_data.

Thanks Mika for your patience with me :-)

Cc: stable@vger.kernel.org
Signed-off-by: Colin Pitrat 
Acked-by: Alexandre Courbot 
Acked-by: Mika Westerberg 
Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2016-06-29T17:05:44+00:00

Pull pin control fixes from Linus Walleij:
 "Here are a bunch of fixes for pin control.  Just drivers and a
  MAINTAINERS fixup:

   - Driver fixes for i.MX, single register, Tegra and BayTrail.

   - MAINTAINERS entry for the documentation"

* tag 'pinctrl-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: baytrail: Fix mingled clock pins
  MAINTAINERS: belong Documentation/pinctrl.txt properly
  pinctrl: tegra: Fix build dependency
  gpio: tegra: Make lockdep class file-scoped
  pinctrl: single: Fix missing flush of posted write for a wakeirq
  pinctrl: imx: Do not treat a PIN without MUX register as an error

Merge tag 'gpio-v4.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2016-06-22T17:13:25+00:00

Pull GPIO fixes from Linus Walleij:
 "More GPIO fixes.  Most prominent the gpiod_to_irq() fix brought to my
  attention by Hans de Goede.  The hardening patch is a consequence of
  the reasoning around that bug.

   - It was discovered that too many parts of the kernel does not
     respect gpiod_to_irq() returning zero for an invalid IRQ.  While
     this gets fixed, we need to make it return negative errorcodes
     again.

   - Harden the library a bit when passed error pointers.  It is a bug
     to use these, but let's be helpful and warn the users.

   - Fix an uninitialized spinlock in the 104-idi-48 driver"

* tag 'gpio-v4.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: make library immune to error pointers
  gpio: make sure gpiod_to_irq() returns negative on NULL desc
  gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock

gpio: tegra: Make lockdep class file-scoped

2016-06-22T15:58:07+00:00

Commit b546be0db955 ("gpio: tegra: Get rid of all file scoped global
variables") moved all file scoped variables into the driver-private
structure to allow potentially multiple instances of the driver. The
change also included turning the lockdep class into a driver-private
field, which doesn't work and produces error messages such as this:

	[    0.142310] BUG: key ffff8000fb3f7ab0 not in .data!

Make the lockdep class file-scoped again to fix this issue.

Signed-off-by: Thierry Reding 
Signed-off-by: Linus Walleij