linux-stable.git/drivers/gpio, branch v4.4.142

gpio: No NULL owner

2018-06-16T07:54:26+00:00

commit 7d18f0a14aa6a0d6bad39111c1fb655f07f71d59 upstream.

Sometimes a GPIO is fetched with NULL as parent device, and
that is just fine. So under these circumstances, avoid using
dev_name() to provide a name for the GPIO line.

Signed-off-by: Linus Walleij 
Cc: Daniel Rosenberg 
Signed-off-by: Greg Kroah-Hartman

gpio: rcar: Add Runtime PM handling for interrupts

2018-05-26T06:49:00+00:00

commit b26a719bdba9aa926ceaadecc66e07623d2b8a53 upstream.

The R-Car GPIO driver handles Runtime PM for requested GPIOs only.

When using a GPIO purely as an interrupt source, no Runtime PM handling
is done, and the GPIO module's clock may not be enabled.

To fix this:
  - Add .irq_request_resources() and .irq_release_resources() callbacks
    to handle Runtime PM when an interrupt is requested,
  - Add irq_bus_lock() and sync_unlock() callbacks to handle Runtime PM
    when e.g. disabling/enabling an interrupt, or configuring the
    interrupt type.

Fixes: d5c3d84657db57bd "net: phy: Avoid polling PHY with PHY_IGNORE_INTERRUPTS"
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Linus Walleij 
[fabrizio: cherry-pick to v4.4.y. Use container_of instead of
gpiochip_get_data.]
Signed-off-by: Fabrizio Castro 
Reviewed-by: Biju Das 
Signed-off-by: Greg Kroah-Hartman

gpio: label descriptors using the device name

2018-04-13T17:50:14+00:00

[ Upstream commit 24e78079bf2250874e33da2e7cfbb6db72d3caf4 ]

Some GPIO lines appear named "?" in the lsgpio dump due to their
requesting drivers not passing a reasonable label.

Most typically this happens if a device tree node just defines
gpios = <...> and not foo-gpios = <...>, the former gets named
"foo" and the latter gets named "?".

However the struct device passed in is always valid so let's
just label the GPIO with dev_name() on the device if no proper
label was passed.

Cc: Reported-by: Jason Kridner 
Reported-by: Jason Kridner 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

gpio: xgene: mark PM functions as __maybe_unused

2018-02-25T10:03:50+00:00

commit b115bebc07f282067eccc06fd5aa3060ab1426da upstream.

When CONFIG_PM_SLEEP is disabled, we get a warning about unused functions:

drivers/gpio/gpio-xgene.c:155:12: warning: 'xgene_gpio_resume' defined but not used [-Wunused-function]
 static int xgene_gpio_resume(struct device *dev)
            ^~~~~~~~~~~~~~~~~
drivers/gpio/gpio-xgene.c:142:12: warning: 'xgene_gpio_suspend' defined but not used [-Wunused-function]
 static int xgene_gpio_suspend(struct device *dev)

The warnings are harmless and can be avoided by simplifying the code and marking
the functions as __maybe_unused.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

gpio: intel-mid: Fix build warning when !CONFIG_PM

2018-02-25T10:03:42+00:00

commit fbc2a294f29e726787a0f5238b27137904f26b81 upstream.

The only usage of function intel_gpio_runtime_idle() is here (in the
same file):

static const struct dev_pm_ops intel_gpio_pm_ops = {
	SET_RUNTIME_PM_OPS(NULL, NULL, intel_gpio_runtime_idle)
};

And when CONFIG_PM is not set, the macro SET_RUNTIME_PM_OPS expands to
nothing, causing the following compiler warning:

drivers/gpio/gpio-intel-mid.c:324:12: warning: ‘intel_gpio_runtime_idle’
defined but not used [-Wunused-function]
static int intel_gpio_runtime_idle(struct device *dev)

Fix it by annotating the function with __maybe_unused.

Signed-off-by: Augusto Mecking Caringi 
Acked-by: Andy Shevchenko 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

gpio: ath79: add missing MODULE_DESCRIPTION/LICENSE

2018-02-03T16:04:26+00:00

commit 539340f37e6d6ed4cd93e8e18c9b2e4eafd4b842 upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-ath79.o
see include/linux/module.h for more information

This adds the license as "GPL v2", which matches the header of the file.

MODULE_DESCRIPTION is also added.

Signed-off-by: Jesse Chan 
Acked-by: Alban Bedel 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

2018-02-03T16:04:25+00:00

commit 97b03136e1b637d7a9d2274c099e44ecf23f1103 upstream.

This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-iop.o
see include/linux/module.h for more information

This adds the license as "GPL", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

gpio: altera: Use handle_level_irq when configured as a level_high

2017-12-16T09:33:51+00:00

[ Upstream commit f759921cfbf4847319d197a6ed7c9534d593f8bc ]

When a threaded irq handler is chained attached to one of the gpio
pins when configure for level irq the altera_gpio_irq_leveL_high_handler
does not mask the interrupt while being handled by the chained irq.
This resulting in the threaded irq not getting enough cycles to complete
quickly enough before the irq was disabled as faulty. handle_level_irq
should be used in this situation instead of handle_simple_irq.

In gpiochip_irqchip_add set default handler to handle_bad_irq as
per Documentation/gpio/driver.txt. Then set the correct handler in
the set_type callback.

Signed-off-by: Phil Reid 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

gpio: mpc8xxx: Correct irq handler function

2016-10-28T07:01:25+00:00

commit d71cf15b865bdd45925f7b094d169aaabd705145 upstream.

From the beginning of the gpio-mpc8xxx.c, the "handle_level_irq"
has being used to handle GPIO interrupts in the PowerPC/Layerscape
platforms. But actually, almost all PowerPC/Layerscape platforms
assert an interrupt request upon either a high-to-low change or
any change on the state of the signal.

So the "handle_level_irq" is not reasonable for PowerPC/Layerscape
GPIO interrupt, it should be "handle_edge_irq". Otherwise the system
may lost some interrupts from the PIN's state changes.

Signed-off-by: Liu Gang 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

gpio: sa1100: fix irq probing for ucb1x00

2016-10-07T13:23:42+00:00

commit 56beac95cb88c188d2a885825a5da131edb41fe3 upstream.

ucb1x00 has used IRQ probing since it's dawn to find the GPIO interrupt
that it's connected to.  However, commit 23393d49fb75 ("gpio: kill off
set_irq_flags usage") broke this by disabling IRQ probing on GPIO
interrupts.  Fix this.

Fixes: 23393d49fb75 ("gpio: kill off set_irq_flags usage")
Signed-off-by: Russell King 
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman