linux-stable.git/drivers/gpio, branch v4.19.296

gpio: pxa: disable pinctrl calls for MMP_GPIO

2023-10-10T19:45:02+00:00

commit f0575116507b981e6a810e78ce3c9040395b958b upstream.

Similarly to PXA3xx and MMP2, pinctrl-single isn't capable of setting
pin direction on MMP either.

Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request")
Signed-off-by: Duje Mihanović 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Greg Kroah-Hartman

gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config()

2023-10-10T19:45:01+00:00

commit f9315f17bf778cb8079a29639419fcc8a41a3c84 upstream.

pinctrl_gpio_set_config() expects the GPIO number from the global GPIO
numberspace, not the controller-relative offset, which needs to be added
to the chip base.

Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support")
Signed-off-by: Bartosz Golaszewski 
Reviewed-by: Andy Shevchenko 
Reviewed-by: Andrew Jeffery 
Signed-off-by: Greg Kroah-Hartman

gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chip

2023-10-10T19:44:58+00:00

[ Upstream commit 26d9e5640d2130ee16df7b1fb6a908f460ab004c ]

The drivers uses a mutex and I2C bus access in its PMIC EIC chip
get implementation. This means these functions can sleep and the PMIC EIC
chip should set the can_sleep property to true.

This will ensure that a warning is printed when trying to get the
value from a context that potentially can't sleep.

Fixes: 348f3cde84ab ("gpio: Add Spreadtrum PMIC EIC driver support")
Signed-off-by: Wenhua Lin 
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Sasha Levin

gpio: tb10x: Fix an error handling path in tb10x_gpio_probe()

2023-10-10T19:44:57+00:00

[ Upstream commit b547b5e52a0587e6b25ea520bf2f9e03d00cbcb6 ]

If an error occurs after a successful irq_domain_add_linear() call, it
should be undone by a corresponding irq_domain_remove(), as already done
in the remove function.

Fixes: c6ce2b6bffe5 ("gpio: add TB10x GPIO driver")
Signed-off-by: Christophe JAILLET 
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Sasha Levin

gpio: tps68470: Make tps68470_gpio_output() always set the initial value

2023-08-11T09:45:27+00:00

[ Upstream commit 5a7adc6c1069ce31ef4f606ae9c05592c80a6ab5 ]

Make tps68470_gpio_output() call tps68470_gpio_set() for output-only pins
too, so that the initial value passed to gpiod_direction_output() is
honored for these pins too.

Fixes: 275b13a65547 ("gpio: Add support for TPS68470 GPIOs")
Reviewed-by: Andy Shevchenko 
Reviewed-by: Daniel Scally 
Tested-by: Daniel Scally 
Reviewed-by: Sakari Ailus 
Signed-off-by: Hans de Goede 
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Sasha Levin

gpio: davinci: Add irq chip flag to skip set wake

2023-04-20T10:04:38+00:00

[ Upstream commit 7b75c4703609a3ebaf67271813521bc0281e1ec1 ]

Add the IRQCHIP_SKIP_SET_WAKE flag since there are no special IRQ Wake
bits that can be set to enable wakeup IRQ.

Fixes: 3d9edf09d452 ("[ARM] 4457/2: davinci: GPIO support")
Signed-off-by: Dhruva Gole 
Reviewed-by: Linus Walleij 
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Sasha Levin

gpio: vf610: connect GPIO label to dev name

2023-03-11T15:31:41+00:00

[ Upstream commit 6f8ecb7f85f441eb7d78ba2a4df45ee8a821934e ]

Current GPIO label is fixed, so can't distinguish different GPIO
controllers through labels. Use dev name instead.

Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Clark Wang 
Signed-off-by: Haibo Chen 
Reviewed-by: Linus Walleij 
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Sasha Levin

gpio: amd8111: Fix PCI device reference count leak

2022-12-14T10:28:28+00:00

[ Upstream commit 45fecdb9f658d9c82960c98240bc0770ade19aca ]

for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.

If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() after the 'out' label. Since pci_dev_put() can handle NULL
input parameter, there is no problem for the 'Device not found' branch.
For the normal path, add pci_dev_put() in amd_gpio_exit().

Fixes: f942a7de047d ("gpio: add a driver for GPIO pins found on AMD-8111 south bridge chips")
Signed-off-by: Xiongfeng Wang 
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Sasha Levin

gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx

2022-09-28T09:02:51+00:00

[ Upstream commit 279c12df8d2efb28def9d037f288cbfb97c30fe2 ]

Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support
mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in
mpc512x via falling edge type. Do same for mpc85xx which support was added
in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio").

Fixes probing of lm90 hwmon driver on mpc85xx based board which use level
interrupt. Without it kernel prints error and refuse lm90 to work:

    [   15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8)
    [   15.267168] lm90 0-004c: cannot request IRQ 49
    [   15.272708] lm90: probe of 0-004c failed with error -22

Fixes: 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio")
Signed-off-by: Pali Rohár 
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Sasha Levin

gpio: gpiolib-of: Fix refcount bugs in of_mm_gpiochip_add_data()

2022-08-25T09:15:17+00:00

[ Upstream commit 5d07a692f9562f9c06e62cce369e9dd108173a0f ]

We should use of_node_get() when a new reference of device_node
is created. It is noted that the old reference stored in
'mm_gc->gc.of_node' should also be decreased.

This patch is based on the fact that there is a call site in function
'qe_add_gpiochips()' of src file 'drivers\soc\fsl\qe\gpio.c'. In this
function, of_mm_gpiochip_add_data() is contained in an iteration of
for_each_compatible_node() which will automatically increase and
decrease the refcount. So we need additional of_node_get() for the
reference escape in of_mm_gpiochip_add_data().

Fixes: a19e3da5bc5f ("of/gpio: Kill of_gpio_chip and add members directly to gpio_chip")
Signed-off-by: Liang He 
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Sasha Levin