linux-stable.git/drivers/gpio, branch linux-6.6.y

gpio: of: clear OF_POPULATED on hog nodes in remove path

2026-05-17T15:13:39+00:00

commit bbee90e750262bfb406d66dc65c46d616d2b6673 upstream.

The previously set OF_POPULATED flag should be cleared on the hog nodes
when removing the chip.

Cc: stable@vger.kernel.org
Fixes: 63636d956c455 ("gpio: of: Add DT overlay support for GPIO hogs")
Acked-by: Linus Walleij 
Reviewed-by: Andy Shevchenko 
Link: https://patch.msgid.link/20260309-gpio-hog-fwnode-v2-1-4e61f3dbf06a@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Greg Kroah-Hartman

gpio: tegra: fix irq_release_resources calling enable instead of disable

2026-04-27T13:23:29+00:00

[ Upstream commit 1561d96f5f55c1bca9ff047ace5813f4f244eea6 ]

tegra_gpio_irq_release_resources() erroneously calls tegra_gpio_enable()
instead of tegra_gpio_disable(). When IRQ resources are released, the
GPIO configuration bit (CNF) should be cleared to deconfigure the pin as
a GPIO. Leaving it enabled wastes power and can cause unexpected behavior
if the pin is later reused for an alternate function via pinctrl.

Fixes: 66fecef5bde0 ("gpio: tegra: Convert to gpio_irq_chip")
Signed-off-by: Samasth Norway Ananda 
Link: https://patch.msgid.link/20260407210247.1737938-1-samasth.norway.ananda@oracle.com
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Sasha Levin

gpio: mxc: map Both Edge pad wakeup to Rising Edge

2026-04-11T12:19:32+00:00

commit c720fb57d56274213d027b3c5ab99080cf62a306 upstream.

Suspend may fail on i.MX8QM when Falling Edge is used as a pad wakeup
trigger due to a hardware bug in the detection logic. Since the hardware
does not support Both Edge wakeup, remap requests for Both Edge to Rising
Edge by default to avoid hitting this issue.

A warning is emitted when Falling Edge is selected on i.MX8QM.

Fixes: f60c9eac54af ("gpio: mxc: enable pad wakeup on i.MX8x platforms")
cc: stable@vger.kernel.org
Reviewed-by: Peng Fan 
Signed-off-by: Shenwei Wang 
Link: https://patch.msgid.link/20260324192129.2797237-1-shenwei.wang@nxp.com
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Greg Kroah-Hartman

gpio: aspeed-sgpio: Change the macro to support deferred probe

2026-03-04T12:20:42+00:00

[ Upstream commit e18533b023ec7a33488bcf33140ce69bbba2894f ]

Use module_platform_driver() to replace module_platform_driver_probe().
The former utilizes platform_driver_register(), which allows the driver to
defer probing when it doesn't acquire the necessary resources due to probe
order. In contrast, the latter uses __platform_driver_probe(), which
includes the comment "Note that this is incompatible with deferred
probing." Since our SGPIO driver requires access to the clock resource, the
former is more suitable.

Reviewed-by: Linus Walleij 
Signed-off-by: Billy Tsai 
Link: https://lore.kernel.org/r/20260123-upstream_sgpio-v2-1-69cfd1631400@aspeedtech.com
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Sasha Levin

gpiolib: acpi: Fix gpio count with string references

2026-02-19T15:28:25+00:00

[ Upstream commit c62e0658d458d8f100445445c3ddb106f3824a45 ]

Since commit 9880702d123f2 ("ACPI: property: Support using strings in
reference properties") it is possible to use strings instead of local
references. This work fine with single GPIO but not with arrays as
acpi_gpio_package_count() didn't handle this case. Update it to handle
strings like local references to cover this case as well.

Signed-off-by: Alban Bedel 
Reviewed-by: Mika Westerberg 
Link: https://patch.msgid.link/20260129145944.3372777-1-alban.bedel@lht.dlh.de
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Sasha Levin

gpio: sprd: Change sprd_gpio lock to raw_spin_lock

2026-02-19T15:28:24+00:00

[ Upstream commit 96313fcc1f062ba239f4832c9eff685da6c51c99 ]

There was a lockdep warning in sprd_gpio:

[    6.258269][T329@C6] [ BUG: Invalid wait context ]
[    6.258270][T329@C6] 6.18.0-android17-0-g30527ad7aaae-ab00009-4k #1 Tainted: G        W  OE
[    6.258272][T329@C6] -----------------------------
[    6.258273][T329@C6] modprobe/329 is trying to lock:
[    6.258275][T329@C6] ffffff8081c91690 (&sprd_gpio->lock){....}-{3:3}, at: sprd_gpio_irq_unmask+0x4c/0xa4 [gpio_sprd]
[    6.258282][T329@C6] other info that might help us debug this:
[    6.258283][T329@C6] context-{5:5}
[    6.258285][T329@C6] 3 locks held by modprobe/329:
[    6.258286][T329@C6]  #0: ffffff808baca108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xc4/0x204
[    6.258295][T329@C6]  #1: ffffff80965e7240 (request_class#4){+.+.}-{4:4}, at: __setup_irq+0x1cc/0x82c
[    6.258304][T329@C6]  #2: ffffff80965e70c8 (lock_class#4){....}-{2:2}, at: __setup_irq+0x21c/0x82c
[    6.258313][T329@C6] stack backtrace:
[    6.258314][T329@C6] CPU: 6 UID: 0 PID: 329 Comm: modprobe Tainted: G        W  OE       6.18.0-android17-0-g30527ad7aaae-ab00009-4k #1 PREEMPT  3ad5b0f45741a16e5838da790706e16ceb6717df
[    6.258316][T329@C6] Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[    6.258317][T329@C6] Hardware name: Unisoc UMS9632-base Board (DT)
[    6.258318][T329@C6] Call trace:
[    6.258318][T329@C6]  show_stack+0x20/0x30 (C)
[    6.258321][T329@C6]  __dump_stack+0x28/0x3c
[    6.258324][T329@C6]  dump_stack_lvl+0xac/0xf0
[    6.258326][T329@C6]  dump_stack+0x18/0x3c
[    6.258329][T329@C6]  __lock_acquire+0x824/0x2c28
[    6.258331][T329@C6]  lock_acquire+0x148/0x2cc
[    6.258333][T329@C6]  _raw_spin_lock_irqsave+0x6c/0xb4
[    6.258334][T329@C6]  sprd_gpio_irq_unmask+0x4c/0xa4 [gpio_sprd 814535e93c6d8e0853c45c02eab0fa88a9da6487]
[    6.258337][T329@C6]  irq_startup+0x238/0x350
[    6.258340][T329@C6]  __setup_irq+0x504/0x82c
[    6.258342][T329@C6]  request_threaded_irq+0x118/0x184
[    6.258344][T329@C6]  devm_request_threaded_irq+0x94/0x120
[    6.258347][T329@C6]  sc8546_init_irq+0x114/0x170 [sc8546_charger 223586ccafc27439f7db4f95b0c8e6e882349a99]
[    6.258352][T329@C6]  sc8546_charger_probe+0x53c/0x5a0 [sc8546_charger 223586ccafc27439f7db4f95b0c8e6e882349a99]
[    6.258358][T329@C6]  i2c_device_probe+0x2c8/0x350
[    6.258361][T329@C6]  really_probe+0x1a8/0x46c
[    6.258363][T329@C6]  __driver_probe_device+0xa4/0x10c
[    6.258366][T329@C6]  driver_probe_device+0x44/0x1b4
[    6.258369][T329@C6]  __driver_attach+0xd0/0x204
[    6.258371][T329@C6]  bus_for_each_dev+0x10c/0x168
[    6.258373][T329@C6]  driver_attach+0x2c/0x3c
[    6.258376][T329@C6]  bus_add_driver+0x154/0x29c
[    6.258378][T329@C6]  driver_register+0x70/0x10c
[    6.258381][T329@C6]  i2c_register_driver+0x48/0xc8
[    6.258384][T329@C6]  init_module+0x28/0xfd8 [sc8546_charger 223586ccafc27439f7db4f95b0c8e6e882349a99]
[    6.258389][T329@C6]  do_one_initcall+0x128/0x42c
[    6.258392][T329@C6]  do_init_module+0x60/0x254
[    6.258395][T329@C6]  load_module+0x1054/0x1220
[    6.258397][T329@C6]  __arm64_sys_finit_module+0x240/0x35c
[    6.258400][T329@C6]  invoke_syscall+0x60/0xec
[    6.258402][T329@C6]  el0_svc_common+0xb0/0xe4
[    6.258405][T329@C6]  do_el0_svc+0x24/0x30
[    6.258407][T329@C6]  el0_svc+0x54/0x1c4
[    6.258409][T329@C6]  el0t_64_sync_handler+0x68/0xdc
[    6.258411][T329@C6]  el0t_64_sync+0x1c4/0x1c8

This is because the spin_lock would change to rt_mutex in PREEMPT_RT,
however the sprd_gpio->lock would use in hard-irq, this is unsafe.

So change the spin_lock_t to raw_spin_lock_t to use the spinlock
in hard-irq.

Signed-off-by: Xuewen Yan 
Reviewed-by: Baolin Wang 
Reviewed-by: Sebastian Andrzej Siewior 
Link: https://lore.kernel.org/r/20260126094209.9855-1-xuewen.yan@unisoc.com
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Sasha Levin

gpio: omap: do not register driver in probe()

2026-02-16T09:17:50+00:00

commit 730e5ebff40c852e3ea57b71bf02a4b89c69435f upstream.

Commit 11a78b794496 ("ARM: OMAP: MPUIO wake updates") registers the
omap_mpuio_driver from omap_mpuio_init(), which is called from
omap_gpio_probe().

However, it neither makes sense to register drivers from probe()
callbacks of other drivers, nor does the driver core allow registering
drivers with a device lock already being held.

The latter was revealed by commit dc23806a7c47 ("driver core: enforce
device_lock for driver_match_device()") leading to a potential deadlock
condition described in [1].

Additionally, the omap_mpuio_driver is never unregistered from the
driver core, even if the module is unloaded.

Hence, register the omap_mpuio_driver from the module initcall and
unregister it in module_exit().

Link: https://lore.kernel.org/lkml/DFU7CEPUSG9A.1KKGVW4HIPMSH@kernel.org/ [1]
Fixes: dc23806a7c47 ("driver core: enforce device_lock for driver_match_device()")
Fixes: 11a78b794496 ("ARM: OMAP: MPUIO wake updates")
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Danilo Krummrich 
Reviewed-by: Rafael J. Wysocki (Intel) 
Link: https://patch.msgid.link/20260127201725.35883-1-dakr@kernel.org
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Greg Kroah-Hartman

gpio: rockchip: Stop calling pinctrl for set_direction

2026-02-06T15:48:26+00:00

commit 7ca497be00163610afb663867db24ac408752f13 upstream.

Marking the whole controller as sleeping due to the pinctrl calls in the
.direction_{input,output} callbacks has the unfortunate side effect that
legitimate invocations of .get and .set, which cannot themselves sleep,
in atomic context now spew WARN()s from gpiolib.

However, as Heiko points out, the driver doing this is a bit silly to
begin with, as the pinctrl .gpio_set_direction hook doesn't even care
about the direction, the hook is only used to claim the mux. And sure
enough, the .gpio_request_enable hook exists to serve this very purpose,
so switch to that and remove the problematic business entirely.

Cc: stable@vger.kernel.org
Fixes: 20cf2aed89ac ("gpio: rockchip: mark the GPIO controller as sleeping")
Suggested-by: Heiko Stuebner 
Signed-off-by: Robin Murphy 
Reviewed-by: Heiko Stuebner 
Link: https://lore.kernel.org/r/bddc0469f25843ca5ae0cf578ab3671435ae98a7.1769429546.git.robin.murphy@arm.com
Signed-off-by: Bartosz Golaszewski 
[ Backport past pinctrl API change for the deleted calls ]
Signed-off-by: Robin Murphy 
Signed-off-by: Greg Kroah-Hartman

gpio: pca953x: mask interrupts in irq shutdown

2026-02-06T15:48:25+00:00

commit d02f20a4de0c498fbba2b0e3c1496e72c630a91e upstream.

In the existing implementation irq_shutdown does not mask the interrupts
in hardware. This can cause spurious interrupts from the IO expander.
Add masking to irq_shutdown to prevent spurious interrupts.

Cc: stable@vger.kernel.org
Signed-off-by: Martin Larsson 
Reviewed-by: Linus Walleij 
Link: https://lore.kernel.org/r/20260121125631.2758346-1-martin.larsson@actia.se
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Greg Kroah-Hartman

gpiolib: acpi: use BIT_ULL() for u64 mask in address space handler

2026-02-06T15:48:24+00:00

[ Upstream commit c0ae43d303e45764918fa8c1dc13d6a5db59c479 ]

The BIT() macro uses unsigned long, which is 32 bits on 32-bit
architectures. When iterating over GPIO pins with index >= 32,
the expression (*value & BIT(i)) causes undefined behavior due
to shifting by a value >= type width.

Since 'value' is a pointer to u64, use BIT_ULL() to ensure correct
64-bit mask on all architectures.

Found by Linux Verification Center (linuxtesting.org) with Svace.

Fixes: 2c4d00cb8fc5 ("gpiolib: acpi: Use BIT() macro to increase readability")
Signed-off-by: Denis Sergeev 
Reviewed-by: Mika Westerberg 
Link: https://lore.kernel.org/r/20260126035914.16586-1-denserg.edu@gmail.com
Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Sasha Levin